Modeling of the relationship between electroosmotic flow and separation parameters in capillary zone electrophoresis using artificial neural networks and experimental design

The prediction of migration time of electroosmotic flow (EOF) marker was achieved by applying artificial neural networks (ANN) model based on principal component analysis (PCA) and standard normal distribution simulation to the input variables. The voltage of performance, the temperature in the capillary, the pH and the ionic strength of background electrolytes (BGE) were applied as the input variables to ANN. The range of the performance voltage studied was from 15 to 27 kV, and that of the temperature in the capillary was from 20 to 30 °C. For the pH values studied, the range was from 5.15 to 8.04. The range of the ionic strength investigated in this paper was from 0.040 to 0.097. The prediction abilities of ANN with different pre-processing procedure to the input variables were compared. Under the same performance conditions, the average prediction error of the migration time of the EOF marker was 5.46% with RSD = 1.76% according to 10 parallel runs of the optimized ANN structure by the proposed approach, and that of the 10 parallel predictions of the optimal ANN structure for the different performance conditions was 12.95% with RSD = 2.29% according to the proposed approach. The study showed that the proposed method could give better predicted results than other approaches discussed.     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

High extraction ability of 1,3-dialkynyl calixarene towards mercury（Ⅱ） ion

The reaction of 1,3-dipropyn-2-yloxycalix[4]arene with mercury(II)acetate could give mercury-containing alkynyl calixarenepolymer.The extraction behavior of 1,3-dipropyn-2-yl-oxycalix[4]arene towards mercury(II)ion was examined.When the moleratio of Hg~(2 )/calixarene was 1:1,the extractive percent can reach to 99.1%,and the extraction capacity was up to 431 mg/g.It couldalso decrease the Hg~(2 )concentration from 5 to 0.85 mg/L,which was only 17%of the national standard of effluent and satisfied thenational standard of drinking water.The extraction process included chemical reaction.     

纳米微晶Y_2Sn_(2-x)FexO_(7-δ)的制备及其催化选择性能研究

采用共沉淀并加法制备了Ｂ位掺杂烧绿石型稀土复合氧化物纳米微晶Ｙ２Ｓｎ２－ｘＦｅｘＯ７－δ（ｘ＝００～１０）。制备的纳米微晶属于立方晶系，Ｆｄ３ｍ，晶胞参数与掺杂量呈线性关系。通过Ｍｓｂａｕｅｒ、ＴＧＤＴＡ，气相色谱和γ射线辐照等技术研究了纳米微晶对ＣＯ的催化选择性能。结果表明，纳米微晶对ＣＯ的催化选择性明显高于一般粉料对ＣＯ的选择性；纳米微晶对ＣＯ的选择性与掺杂量有关；未辐照的纳米微晶，当掺杂量ｘ＝０６时，其对ＣＯ的选择性为最高，辐照后的纳米微晶，当掺杂量ｘ＝０４时，其对ＣＯ的选择性为最高     

Enatiomeric analysis of simendan by CE with beta-CD as chiral selector compared with CMPA-HPLC

The chiral separation of simendan enantiomers using capillary electrophoresis was studied with beta-cyclodextrin (beta-CD) as chiral selector. The influences of the concentration and pH of borate buffer solution, beta-CD concentration and methanol content in the background electrolyte were investigated. These factors were compared with those in an HPLC with beta-CD as chiral mobile phase additive (CMPA-HPLC). The quantification properties of the developed CE method were examined. A baseline separation of simendan enantiomers was achieved in the background electrolyte of 20 mmol/L borate buffer (pH 11.0) containing 12 mmol/L beta-CD-methanol (50:50 in volume ratio). The CE method is comparable with CMPA-HPLC in chiral resolution, although the optimal pH in CE (11.0) is much higher than that (6.0) in CMPA-HPLC. This chiral CE method is applicable to the quantitative ananlysis and enantiomeric excess value determination of L-simendan.     

Reinforcement of Self‐Healing Polyacrylic Acid Hydrogel with Acrylamide Modified Microcrystalline Cellulose†

Self‐healing hydrogel such as polyacrylic acid (PAA) hydrogel has attracted increasing attention based on its promising potential applications. However, it usually suffers from low strength especially as mechanical device. Herein, a commercial microcrystalline cellulose (MCC) was modified with acrylamide to graft polyacrylamide (PAM) chains on the particle surface. The acrylamide‐modified MCC (AM‐MCC) was then dispersed in monomer solution of acrylic acid to prepare composite hydrogel. The mechanical properties of the obtained composite hydrogels and the self‐healed hydrogels were carefully measured by compressive and tensile tests, and by dynamic mechanical analysis. Our results demonstrate that introduction of a small amount of AM‐MCC such as 3 wt% can not only reinforce the original hydrogel and the healed hydrogel markedly, but also improve self‐healing efficiency obviously. The analyses indicate that in addition to the reversible multi‐interactions such as hydrogen bonding and ionic interactions, the entanglements between the PAA chains of the hydrogel matrix and the PAM chains grafted on the MCC particles have also played an important role on the improvement in mechanical performances and the healing ability of the hydrogel. Moreover, the responsiveness to exterior ion has been tested to indicate potential application of the composite hydrogel as self‐healable sensor.     

Built to order: molecular tinkertoys from the [Re(6)(mu(3)-Se)(8)](2+) clusters

Ligand substitution of [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CH(3)CN)](SbF(6))(2) (1) with pyridyl-based ligands, 2,4,6-tri-4-pyridyl-1,3,5-triazine (L1) and 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (L2), produced respectively the star-shaped tricluster (T1) and tetracluster (T2) arrays, wherein three (T1) and four (T2) units of the [Re(6)(mu(3)-Se)(8)](2+) core-containing clusters are interconnected by the corresponding bridging ligands. These novel supramolecular assemblies were characterized by a combination of NMR ((1)H and (31)P) spectroscopy, ESI-MS, and microanalysis. The molecular and solid-state structures of T1 have also been established by single-crystal X-ray diffraction.     

Resonant coupling of bound excitons with LO phonons in ZnO: excitonic polaron states and Fano interference

We report on a photoluminescence observation of robust excitonic polarons due to resonant coupling of exciton and longitudinal optical (LO) phonon as well as Fano-type interference in high quality ZnO crystal. At low enough temperatures, resonant coupling of excitons and LO phonons leads to not only traditional Stokes lines (SLs) but also up to second-order anti-Stokes lines (ASLs) besides the zero-phonon line (ZPL). The SLs and ASLs are found to be not mirror symmetric with respect to the ZPL, strongly suggesting that they are from different coupling states of exciton and phonons. Besides these spectral features showing the quasiparticle properties of exciton-phonon coupling system, the first-order SL is found to exhibit characteristic Fano lineshape, caused by quantum interference between the LO components of excitonic polarons and the continuous phonon bath. These findings lead to a new insight into fundamental effects of exciton-phonon interactions.     

An unprecedented 8-fold interpenetrating diamondoid-like coordination polymer containing a Cu+(4)(RCO2)(4) cluster as connecting node

The reaction of Cu(I)(CH(3)CN)(4)BF(4) with 4-pyridylacrylic acid (4-HPYA) affords an unprecedented 8-fold interpenetrating diamondoid-like coordination polymer network [Cu(I)(3)(4-PYA)(2)(H(2)O)(BF(4)) ] (1) with a Cu(+)(4)(CO(2))(4) cluster as connecting node. The interpenetration in metal coordination polymers is the highest degree ever found within diamondoid nets containing a cluster as connecting note. Its fluorescent property was also reported.