Si微电阻桥温度分布与热传导特性的显微Raman光谱研究

采用显微Raman光谱方法对红外目标模拟器中重掺杂Si微电阻桥单元的热传导特性进行研究，根据Si桥的实际特性建立相应的Raman散射模型，通过测量Raman峰位的移动得到高功率激光辐照下测量点的温度.对Si桥桥面分别进行了沿某些特殊线段的逐点线扫描和覆盖全部桥面的面扫描，得到各点的温升及其分布.用基于有限元分析的软件结合Si桥结构参数对各测量点的温升进行了模拟计算，其结果在热导分布的基本趋势上与实验相一致.实验细致地揭示了热导分布的局域起伏，反映出实际器件的不均匀性，为改进器件设计、优化器件性能提供了实验依据. 关键词： Raman光谱 Si桥 温度分布 热导     

Effects of Evanescent Space-Harmonics on the Transmission Characteristics of a Gaussian Beam by Cylindrical Wire Grids

When electromagnetic waves propagate through a wire grid, there will be some evanescent space harmonics generated around the wire grid. In this paper, we mainly investigate their effects on the transmission characteristics of a Gaussian beam by cylindrical wire grids. The results are compared with those without taking account of evanescent space-harmonics.     

Stancu-Sikkema算子的点态估计

本文构造了Stancu—Sikkema算子,并利用点态光滑模研究了此算子的点态逼近正逆定理.     

Urea method for the synthesis of hydrotalcites

Mg-Al, Zn-Al and Ni-Al hydrotalcite-like compounds with high crystallinity were synthesized by using the decomposing property of urea at high temperature. The crystallinity and the regularly of the samples were much preferable to those synthesized by other methods. This revised version was published online in June 2006 with corrections to the Cover Date.     

Microwave‐improved polymerization of ϵ‐caprolactone initiated by carboxylic acids

The ring‐opening polymerization of ε‐caprolactone (ε‐CL), initiated by carboxylic acids such as benzoic acid and chlorinated acetic acids under microwave irradiation, was investigated; with this method, no metal catalyst was necessary. The product was characterized as poly(ε‐caprolactone) (PCL) by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, ultraviolet spectroscopy, and gel permeation chromatography. The polymerization was significantly improved under microwave irradiation. The weight‐average molecular weight (M_w) of PCL reached 44,800 g/mol, with a polydispersity index [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] of 1.6, when a mixture of ε‐CL and benzoic acid (25/1 molar ratio) was irradiated at 680 W for 240 min, whereas PCL with M_w = 12,100 and M_w/M_n = 4.2 was obtained from the same mixture by a conventional heating method at 210 °C for 240 min. A degradation of the resultant PCL was observed during microwave polymerization with chlorinated acetic acids as initiators, and this induced a decrease in M_w of PCL. However, the degradation was hindered by benzoic acid at low concentrations. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 13–21, 2003     

单光子探测器量子效率的绝对自身标定方法

提出一种单光子探测器量子效率的绝对自身标定方案，利用光参量下转换过程中产生的光子对在时间上的相关性，先将参量光束分为两路，然后引入相对延时，使同时产生的孪生光子先后进入单光子探测器，然后将探测器之后的电路分为三路，其中一路直接进入计数器得到探测器所探测到的光子的总计数率，另两路用电路方法引入和光路相当的相对延时，经符合电路后进入计数器，得到前后到达探测器的光子对之间的符合计数率.这样，从符合计数率与总光子计数率之比即可在不需要任何其他探测器或者参照标准的情况下获得探测器的量子效率.文中给出两种方案，分别适     

Differentiation between tracks and damages in SSNTD under the atomic force microscope

We have observed three-dimensional sponge-like structures as well as strips of connecting pits on the surface of the LR 115 detector after etching, which can be confused with the small tracks formed after short etching time. We have employed an atomic force microscope (AFM) to study these “damages” as well as genuine alpha tracks for short etching time. It was found that while the track and damage openings could be similar in size and shape, the depths for the damages were consistently smaller. Therefore, the depth of the pits will serve as a clear criterion to differentiate between tracks and other damages. The ability to discriminate between genuine tracks from other damages is most important for etching for short time intervals.     

Semidomains and Metabelian Product of Metabelian Lie Algebras

This article is the fourth part of the series of papers whose aim is the construction of algebraic geometry over metabelian Lie algebras. __________ Translated from Sovremennaya Matematika i Ee Prilozheniya (Contemporary Mathematics and Its Applications), Vol. 14, Algebra, 2004.     

Comparative investigation of up-conversion luminescence in Tm/Yb-codoped germanate-niobic and germanium-bismuth glasses: effect of phonon density on up-conversion emission

Tm³⁺/Yb³⁺-codoped germanate-niobic (GN) and germanium-bismuth (GB) glasses have been synthesized by conventional melting and quenching method. Intense blue and weak red emissions centered at 477 and 650 nm, corresponding to the transitions ¹G₄→³H₆ and ¹G₄→³H₄, respectively, were observed at room temperature. The possible up-conversion mechanisms are discussed and estimated. GN glass showed a weaker up-conversion emission than GB glass, which is inconsistent with the prediction from the difference of maximum phonon energy between GN and GB glasses. In this paper, Raman spectroscopy was employed to investigate the origin of the difference in up-conversion luminescence in the two glasses. Compared with phonon side-band spectroscopy, Raman spectroscopy extracts more information including both phonon energy and phonon density. For the first time, our results reveal that, besides the maximum phonon energy, the phonon density of host glasses is also an important factor in determining the up-conversion efficiency.     

Synthesis and crystal structure of the octahedral cluster complex [Th(DMSO)8Cl][Re6Se7Cl7]

A cluster complex of the composition [Th(DMSO)₈Cl][Re₆Se₇Cl₇] has been obtained by interaction of ThCl₄ solution in DMSO with a water solution of K₃[Re₆Se₇Cl₇] and KCl. The compound crystallizes in the rhombic space group Pbcm with unit cell parameters a = 12.262(2) Å, b = 19.653(6) Å, c = 23.603(6) Å, V = 5688(2) ų, Z = 4, d _calc = 3.282 g/cm³. The structure is built from centrosymmetric cluster anions [Re₆Se₇Cl₇]^3? and complex cations [Th(DMSO)₈Cl]³⁺ possessing mirror-plane symmetry, half of the DMSO ligands being doubly disordered.