Femtosecond laser micromachined optical waveguides in LiTaO3 crystal

By using femtosecond laser micromachining, optical wave guides in both depressed cladding and dual‐line configurations have been produced in LiTaO₃ crystal. The guiding properties and the thermal stability have been investigated for both geometries, which exhibit different performance. Depressed cladding waveguides support guidance along both extraordinary and ordinary index polarizations, while dual‐line waveguides support only extraordinary index polarization. Thermal annealing has been proved to be an effective method to reduce the propagation losses. For the cladding waveguide, the lowest propagation loss was as low as 0.38 dB/cm after the annealing treatment at 400 °C. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

永磁体外部磁场的不均匀性研究

从永磁体的分子电流观点、退磁场、工艺等出发, 以矩形永磁体为例, 从理论上分析了影响永磁体外部磁场不均匀性的各种因素.研究结果表明, 永磁体外部磁场宏观不均匀性(好场区均匀度和面积相对大小) 和空间距离及永磁体的外形设计密切相关. 退磁场对永磁体外部磁场微观不均匀性有着复杂影响. 永磁体工艺如粉末颗粒、取向度、烧结凝固、机械加工等将影响永磁体外部磁场的不均匀性, 如磁化偏角、对称性、光滑性等. 关键词： 永磁体 外部磁场 不均匀性 退磁场     

亚微秒脉冲表面介质阻挡放电等离子体诱导连续漩涡的研究

使用粒子激光图像测速技术对亚微秒脉冲激励表面介质阻挡放电激励器连续产生诱导漩涡进行了实验研究, 给出了包含脉冲重复频率和漩涡频率的双频率激励模式的具体形式. 实验过程中出现了原发型与继发型两类示踪粒子空白区, 前者由放电释热的微爆炸作用造成, 使得诱导流动远离壁面, 能够减小壁面摩擦阻力的作用; 以暴露电极左侧继发型空白区被完全吹除作为重复启动激励的临界点. 为提高控制效果应采用尽可能高的脉冲重复频率, 漩涡时间内脉冲数量应大于10, 最大诱导速度随脉冲数量增大而增大, 但动量传递效率降低. 使用亚微秒脉冲激励具备释热、体积力两种作用机理. 关键词： 双频率亚微秒脉冲 表面介质阻挡放电 连续漩涡     

基于扩频码的单载波迭代频域均衡水声通信

单载波时域均衡在长时延扩展水声信道中计算量大,并对接收机参数的选择较为敏感,可靠性低,而正交频分复用信号峰均功率比高、对频率偏移敏感. 针对这些问题,提出基于扩频码的单载波块传输高速率水声通信方法和基于T/4分数间隔迭代频域均衡的接收机算法. 该接收机利用已知扩频码进行信道估计以及对由多普勒偏移引起的旋转相位进行估计,并通过一种低复杂度迭代频域均衡算法改善系统性能. 开展了湖上实验研究,结果表明在浅水1.8 km距离且复杂多径干扰条件下,利用BPSK/QPSK调制可实现10^-2–10^-4的误码率并达到1500–3000 bit/s的有效数据率. 关键词： 水声通信 单载波 频域均衡 迭代处理     

The Effect of OMMT on the Morphology and Mechanical Properties of PVC/ABS Blends

Poly(vinyl chloride) (PVC)/acrylonitrile-butadiene-styrene (ABS) blends containing organically modified montmorillonite (OMMT) were prepared using a twin-screw extruder followed by injection molding. The OMMT dispersion was evaluated by X-ray diffraction and transmission electron microscopy. The clay was preferentially situated in the PVC phase and across the interfaces of PVC/ABS. The effect of the addition of OMMT on the morphology and mechanical properties was also evaluated. Scanning electron microscopy revealed a large reduction in domain size when OMMT was used. The mechanical properties were studied through tensile and impact tests. The yield stress increased when an appropriate amount of OMMT was used without impairing the impact strength.     

Reactive Compatibilization of Poly(Butylene Terephthalate)/Acrylonitrile-Styrene-Acrylate Blends by Epoxy Resin: Morphology and Mechanical Properties

The effect on the notched Izod impact strength of poly(butylene terephthalate) (PBT) by blending it with acrylonitrile-styrene-acrylate (ASA) was examined. Epoxy resin (ER) was demonstrated to be an efficient compatibilizer for the partially compatible blends of PBT/ASA. It requires only a very small amount of ER to improve the toughness of the PBT/ASA blends drastically. Furthermore, there exists an optimum proportion of ER added to achieve maximum notched Izod impact strength. Transmission electron microscopy (TEM) observation suggests that the ER in the PBT/ASA/ER blends suppressing the tendency of coalescence of ASA, leading to better dispersion of the ASA particles. Field emission scanning electron microscopy (FESEM) shows that ER enhances the phase dispersion and the interfacial adhesion between the PBT and ASA phases, it improves the compatibility between PBT and ASA. The compositions in the interphase was continuous, which results in multiphase composites with a graded interphase. It is suggested that enhanced interphase adhesion was necessary to obtain improved dispersion, fine phase morphology, and better toughness.     

Study on the Interaction Between Oxymatrine and Tungstosilicic Acid by Resonance Rayleigh Scattering and Its Analytical Applications

In the 0.1 mol · L^?1 hydrochloric acid solution, oxymatrine reacted with tungstosilicic acid to form a 2:1 ion-association complexes. This results in a great enhancement of resonance Rayleigh scattering. The maximum resonance Rayleigh scattering wavelength was located at 393 nm. Resonance Rayleigh scattering intensity was proportional to the concentration of oxymatrine in the range of 1.5–26.4 µg · mL^?1, and the detection limit (3σ) was 0.23 µg · mL^?1. The optimum conditions and the effects of coexisting substances on the reaction were investigated. The method shows a wide linear range and high sensitivity, and was applied to the determination of oxymatrine in marine capsules and human urine samples with satisfactory results. Therefore, a highly sensitive, simple, and quick method has been developed for the determination of oxymatrine.     

Optimization of Pretreatment Method for Alkylmercuries Speciation in Coal by High‐Performance Liquid Chromatography Coupled with UV‐Digestion Cold Vapor Atomic Fluorescence Spectrometry

Abstract

Exhaustive extraction of analytes in their original chemical forms from samples with complex matrices is a pivotal step for speciation analysis. Herein we propose a pretreatment method for extracting and preconcentrating methylmercury and ethylmercury from coal samples by using KBr–H₂SO₄/CuSO₄–C₆H₅CH₃–Na₂S₂O₃ system. The extraction conditions, including the volume of the organic phase and the extraction time, were optimized in detail. Speciation analysis of alkylmercuries was carried out by high‐performance liquid chromatography online coupled with UV‐digestion and cold vapor atomic fluorescence spectrometry. The detection limits were 0.6 ng mL^?1 for methylmercury and 1 ng mL^?1 for ethylmercury, respectively. The recoveries of methylmercury and ethylmercury spiked in a sample were 84% and 82%, respectively. The method was applied successfully to analysis of alkylmercuries in four coal samples collected from northeast China.     

Improved Performance of On-line Atom Trapping in Flame Furnace Atomic Absorption Spectrometry by Chemical Vapor Generation: Determination of Cadmium in High-Salinity Water Samples

ABSTRACT

On-line atom trapping inside a nickel flame furnace using chemical vapor generation for sample introduction was proposed for the determination of trace cadmium by flame atomic absorption spectrometry (AAS). Cadmium volatile species was generated upon reaction with potassium borohydride and then flushed into a flame furnace for on-line trapping by a flow of nitrogen carrier gas. The middle part of the flame furnace, where the carrier gas impacts, is cooled by the gas flow, and this provides a fine strategy for on-line atom trapping for the purpose of preconcentration. A stainless steel plate is put on the top of the flame burner in the middle to form a flame-free zone, which also greatly lowers the temperature of the flame furnace and facilitates the atom-trapping process. Due to the introduction of chemical vapor generation, matrix effect was greatly alleviated compared with direct pneumatic nebulization for on-line atom trapping in flame furnace AAS. With trapping time of 35 s, the current approach achieved an excellent limit of detection of 20 ng L^?1. The proposed method was successfully applied for the quantification of cadmium in high-salinity samples.     

A comparative in vitro study of the digestibility of heat- and high pressure-induced gels prepared from industrial milk whey proteins

We undertook this study to compare the digestibility of heat- and high pressure-induced gels produced from whey protein isolate (WPI). To simulate in vivo gastrointestinal digestion of WPI gels, a pepsin–trypsin digestion system was used. The in vitro protein digestibility of WPI gels induced by high pressure (400 MPa and 30 min; P-gel) and those induced by heat (80°C and 30 min; H-gel) was compared using a protein concentration of 0.14 g mL^?1. The in vitro protein digestibility of P-gels was significantly greater than that of H-gels (p<0.05). The size-exclusion chromatography profiles of the hydrolysates showed that the P-gel generated more and smaller peptides than natural WPI and H-gels. Furthermore, Sodium dodecyl sulfate–polyacrylamide gel electrophoresis analysis showed some soluble disulfide-mediated aggregation in the P-gel, while there was more insoluble aggregation in the H-gel than the P-gel. The P-gel was more sensitive to proteinase than the H-gel, which was related to the content of S–S bonds, and this in turn could be attributed to the differences in the gelation mechanism between the H-gel and P-gel.