Wavelets and high order numerical differentiation

Numerical differentiation is a classical ill-posed problem. In this paper, a wavelet regularization method for high order numerical derivatives is given and an order optimal Hölder-type stability estimate is also provided. Some numerical examples show that the method is very effective.     

几种食用植物油发热量的测定

利用WZR-1A型精密微电脑量热计系统地测量了10种食用植物油的恒容燃烧热.准确称取一定量的基准物质,放入氧弹中充人高压纯氧,将测试样品在氧弹中完全燃烧,并记录燃烧前后时间与量热计温度变化数据,运用仪器所带的数据处理软件计算出仪器热容量,然后再准确称取一定量的食用植物油,装入已准确测定热值的燃烧胶囊中后,将测试数据用自编的计算机处理程序对测试数据处理,从而得到食用植物油的燃烧热值.此法准确、简便、实用,可用于日常检测工作.     

奶制品热值测定

利用WZR-1A型精密微电脑量热计系统地测量了8种奶制品的恒容燃烧热.准确称取一定量的基准物质,放入氧弹中充入高压纯氧,将测试样品在氧弹中完全燃烧,并记录燃烧前后时间与量热计温度变化数据,利用仪器自带的数据处理软件计算出仪器热容量,然后再准确称取一定量的奶制品,装入已准确测定热值的燃烧胶囊中后,将测试数据用自编的计算机处理程序对测试数据处理,从而得到奶制品的燃烧热值.此法准确、简便、实用,可用于日常检测工作.     

因果图法在仪器分析中的应用

通过分析影响仪器分析质量的5M1E因素,即操作者（Man）,仪器设备（Machine）,分析方法（Method）,分析材料（Material）,管理（Management）,环境（Environment）以及管理（management）,提出建立仪器分析的因果关系图的一般方法,并以原子吸收光谱分析中分析质量的因果关系为例,提出了提高仪器分析质量,减少分析误差的可行性控制措施.分别对因果关系图的绘制,应用和注意问题以及6大因素在仪器分析中的特点及防误措施作了介绍.     

雷诺校正法在煤发热量测定中的应用

介绍雷诺校正法计算煤发热量的原理、算法及应用.方法应用于燃煤发热量计算,结果表明,用雷诺校正法处理煤发热量测定时,其结果优于瑞方公式法和奔特公式法,与国标法相比,分析误差在规定范围内.在文中列出了雷诺校正法处理煤发热量的实用Matlab源程序.     

2.45 GHz ECR离子源的微波阻抗匹配

ECR离子源的等离子体阻抗对其微波传输与阻抗匹配设计至关重要。在中国科学院近代物理研究所现有的2.45 GHz ECR 质子源上,对等离子体阻抗进行了测量。首先用水吸收负载代替等离子体负载测量得到了所用微波窗阻抗,然后根据质子源测量数据,推算得到了等离子体阻抗。实验结果表明,脊波导输出端阻抗与后续负载不完全匹配,等离子体阻抗随微波功率变化呈非线性。这些结果为ECR离子源过渡匹配和微波窗的设计提供了参考依据。Plasma impedance of an ECR ion source is important for microwave transmission and impedance matching design. Plasma impedance was measured indirectly with the 2.45 GHz ECR proton source at the Institute of Modern Physics, Chinese Academy of Sciences. In the test, we got microwave window mpedance by using water absorption load instead of plasma load, and the source plasma impedance was derived from the test data with the 2.45 GHz ECR proton source and microwave window impedance. The experimental results show that ridge waveguide output impedance and the subsequent load does not exactly match, plasma impedance variation is nonlinear with microwave power. The achievedresult is useful in the design of ridged waveguide and microwave window.     

强流ECR离子源引出系统研究

为了提高强流ECR 离子源的引出束流品质,分别设计了1# 和2# 引出系统,利用束流引出模拟软件PBGUNS 对1# 和2# 引出系统进行了质子束流引出与传输的模拟计算,结合实际测得的发射度数据分析引出系统,发现2# 引出系统比1# 引出系统引出束流品质高。对ECR 离子源引出系统的电势等位线分布等参数引起的球差进行了简单数学推导及MATLAB 绘图,并结合1# 和2# 引出系统束流相图模拟结果证明了球差会使引出束流品质有效发射度增长,通过适当加大电极孔径可改善束流聚焦情况,得到了束流光学聚焦较好的束流引出系统设计。To improve the quality of extracted ion beam from a high current ECR ion source, 1# and 2# extraction systems were designed and tested. The PBGUNS code was used to simulate the 1# and 2# extraction systems of proton ion beam. The emittance measurement results with the two different extraction systems were compared and analyzed with the simulation, the conclusion that more high quality beam extracted from 2# system than 1# system was got. The formula derivation of ECR ion source extraction system spherical aberration and MATLAB drawing was done by the analyzing on the distribution of extraction field equipotentials, effective emittance increasing caused by spherical berration was proved by 1# and 2# extraction systems beam phase space simulation result, beam focusing would be improved if electrode hole size increasing appropriately and a general concept on good optics focusing of ion beam extraction system was proposed finally.     

膨胀机力学模拟试验装置

为了适应当前发展的需要,本试验装置可以研究G-M制冷机中的膨胀机在动态环境下能否可靠工作,为其提供了强有力的试验平台。本装置可以单独实现水平面的旋转或垂直面的翻转,还可以同时实现水平面的旋转和垂直面的翻转。对G-M制冷机扩大应用领域是不可或缺的试验装置。     

大型回热换热器的降温实验

大型低温配件的降温试验复杂和多变,文中针对大型回热换热器的降温进行了研究。将回热换热器置于特制的冷箱内,利用液氮作为冷源,氦气做为载冷剂为换热器提供降温条件;隔膜压缩机为循环氦气提供循环压力。试验前将换热器上面布置9支传感器,传感器所采集的数据自动记录并保存在上位机内,同时绘制降温曲线,为大型回热换热器的降温研究提供了数据。     

On the neutron flux flattening problem

In this paper, we present the critical neutron flux flattening problem governed by the critical transport equation in a nonuniform slab with periodic boundary conditions. Existence and uniqueness theorem of the optimal solution is shown in continuous function space.