147Pm激发的ZnS：Cu,Cl发光粉的研究

以高纯ZnS粉末为基质,采用高温转相、扩散,以及表面涂敷工艺,制得了¹⁴⁷Pm激发的ZnS:Cu,Cl发光粉。分析了ZnS:Cu,Cl的晶体结构,测量了ZnS:Cu,Cl的激发光谱、发射光谱、发光亮度。其晶体结构主要是六方纤锌矿型结构,激发光谱峰值波长为341nm,发射光谱峰值波长为513nm,初始发光亮度达到312mcd/m₂。由激发光谱的峰值波长341nm推算得到六方ZnS晶体的禁带宽度为3.64eV。分析了¹⁴⁷Pm激发的ZnS:Cu,Cl发光粉的发光寿命,其发光寿命达到5年以上。还探讨了该放射性发光粉的发光机理。¹⁴⁷Pm激发的ZnS:Cu,Cl的稳定发光,实际上是激发过程与复合过程的准平衡。ZnS:Cu,Cl的绿色发光来源于深施主-深受主对的复合发射。实验结果的分析表明,ZnS:Cu,Cl中深施主-深受主之间的能级间隔约为2.42eV。     

甲醇在γ-Al2O3,CeO2及其负载Pd催化剂上吸附和分解的原位红外光谱研究

利用原位傅里叶变换红外光谱 (FTIR)技术对甲醇在γ Al2 O3,CeO2 以及Pd/Al2 O3,Pd/CeO2 催化剂上的吸附和分解行为进行了研究。综合考虑了载体和活性组分的作用 ,分析了甲醇在不同载体负载Pd催化剂上可能的分解途径。在Pd/CeO2 催化剂上 ,活性组分和载体对甲醇分解的过程表现出了一种协同效应。     

Short Tm3+-doped fiber lasers with watt-level output near 2 μm

High-power operation of diode-pumped fiber lasers at wavelength near 2μm are demonstrated with short length of heavily Tm3 -doped silica glass fibers. With 7-cm long fiber, a laser at near 2 μm is obtained with the threshold of 135 mW, maximum output power of 1.09 W, and slope efficiency of 9.6% with respect to the launched power from a laser diode at 790 nm. The output stability of this fiber laser is within 5%.The dependence of the performance of fiber lasers on the operation temperature and cavity configuration parameters is also investigated.     

Room-temperature direct-bandgap photoluminescence from strain-compensated Ge/SiGe multiple quantum wells on silicon

Strain-compensated Ge/Si_0.15Ge_0.85 multiple quantum wells were grown on an Si_0.1>Ge_0.9 virtual substrate using ultrahigh vacuum chemical vapor deposition technology on an n⁺-Si(001) substrate. Photoluminescence measurements were performed at room temperature, and the quantum confinement effect of the direct-bandgap transitions of a Ge quantum well was observed, which is in good agreement with the calculated results. The luminescence mechanism was discussed by recombination rate analysis and the temperature dependence of the luminescence spectrum.     

Average kinetic energy of ions ejected from pure Coulomb explosions of methane clusters

We use an electrostatic model to study the average kinetic energy of ions ejected from the pure Coulomb explosions of methane clusters (CA4)n (light atom A=H and D). It is found that the ratio of the average kinetic energy of the ions to their initial average electrostatic potential energy is irrelevant to the cluster size. This finding implies that as long as the ratio is given, the average kinetic energies of the ions can be simply estimated from their initial average electrostatic potential energies, rather than from the time- consuming simulations. The ratios for the different charge states of carbon ions are presented.     

基于遗传算法的多车体机器人路径规划方法

带拖车的移动机器人系统是一种复杂的多车体系统,在不同的转弯角度下所需的路径宽度也不同,其路径规划是个难题;在给出带拖车轮式移动机器人稳态和暂态过程运动学方程的基础上,推导得出了多车体移动机器人在最大转弯情况下所需的最大路径宽度,并将之定义为等效尺寸;应用遗传算法,提出了基于等效尺寸的多车体移动机器人的路径规划方法;首先通过等效尺寸的多步障碍扩张,对障碍物的临近区域和狭窄通道进行可行性约束的分析;然后应用遗传算法进行全局的路径规划,将路径的长度和宽度综合在适应度函数之中;在一定程度上,多车体移动机器人的路径规划问题得到解决;文章通过建立三维网格化地图,对障碍物的临近区域和狭窄的瓶颈通道区域进行了可行性约束的描述,遗传算法在较复杂的环境中实现了良好的避障,并得到了相对较短的有效路径。     

利用宇宙线对BESⅢ量能器CsⅠ（Tl）晶体探测器单元的测量

利用宇宙射线进行探测器模型的性能测试是高能物理普遍采用的方法，其中最重要的步骤之一就是确定宇宙线入射的准确位置和径迹．多数采用丝室探测器来进行宇宙线的精确定位，需要很高的造价和复杂的电子学系统．本文介绍一种简单的定位方法，采用塑料闪烁体条加波移剂光纤编码读出的方式，可以实现精度为1cm的定位．据此建立了一套实验装置，对BESⅢ电磁量能器CsⅠ（Tl）晶体探测器单元的光输出强度和不均匀性进行了测量．     

Calculation of the reactor neutron time of flight spectrum by convolution technique

It is a very complex and time-consuming process to simulate the nuclear reactor neutron spectrum from the reactor core to the export channel by applying a Monte Carlo program. This paper presents a new method to calculate the neutron spectrum by using the convolution technique which considers the channel transportation as a linear system and the transportation scattering as the response function. It also applies Monte Carlo Neutron and Photon Transport Code （MCNP） to simulate the response function numerically. With the application of convolution technique to calculate the spectrum distribution from the core to the channel, the process is then much more convenient only with the simple numerical integral numeration. This saves computer time and reduces some trouble in re-writing of the MCNP program.     

Dual-wavelength distributed Bragg reflector semiconductor laser based on a composite resonant cavity

We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector (DBR) composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase section, and an active gain section. The gain section facet is cleaved to work as a laser cavity mirror. The other laser mirror is the DBR grating, which also functions as a wavelength filter and can control the number of wavelengths involved in the laser action. The reflection bandwidth of the DBR grating is fabricated to have an appropriate value to make the device work at the dual-wavelength lasing state. We adopt the quantum well intermixing (QWI) technique to provide low-absorption loss grating and passive phase section in the fabrication process. By tuning the injection currents on the DBR and the gain sections, the device can generate 0.596 nm-spaced dual-wavelength lasing at room temperature.     

复式螺旋测微器螺距误差补偿与示值误差综合

本文简要介绍了复式螺旋测微器的设计原理,在复式螺旋运动误差分析的基础上,提出了一种螺距误差自动补偿方法。通过样机的螺距误差实测曲线和测微器示值误差检定结果,验证了它的可行性和示值误差综合的正确性。