丙氨酸咪唑钐的三维荧光激发和发射光谱

测量了新制丙氨酸咪唑钐水溶液的三维荧光激发和发射光谱,分析了在不同波长激发光作用下的荧光特征,与配体咪唑、α-丙氨酸及氯化钐的荧光谱进行了比较,讨论了模型化合物上转换荧光中的双光子和多光子加合现象并发现在10^-2-10^-4 mol/L 浓度范围内荧光强度与溶液浓度呈正相关.     

Zero—field—cooled and field—cooled magnetizations and magnetic susceptibility of itinerant ferromagnet SrRuO3

Zero-field-cooled(ZFC) magnetization,field-cooled(FC) magnetization,ac magnetic susceptibility and major hysteresis loops of itinerant ferromagnet SrRuO3 have been measured at magnetic ordering temperatures ranging from 5 to 160K.An empirical model is proposed to calculate the measured ZFC magnetization.The result indicates that the calculated ZFC magnetization compares well with the measured one.Based on the generalized Preisach model.both the ZFC and FC curves are reproduced by numerical simulations.The critical temperature and critical exponents are determined by measuring the ac magnetic susceptibility in different bias magnetic fields at temperatures in the vicinity of the point of phase transition.     

改进型低阻类膜片加载同轴渡越时间振荡器

采用2.5维粒子模拟软件对改进型低阻类膜片加载同轴渡越时间振荡器进行了研究。研究结果表明：提取腔工作于类模场时,具有较高的束波互作用效率;引入渐变型输出波导,提高了提取腔内微波向外耦合输出的能力;通过加载感性支撑杆,一方面对金属膜片起支撑固定作用,另一方面可以及时将膜片上的感应电荷导流至接地外筒、从而降低间隙附近的空间电荷效应,以增加可提取的束动能。经优化设计,该结构在二极管电压为530 kV,二极管电流为12.9 kA、外加导引磁场为0.5 T的条件下,输出微波功率2.74 GW,微波频率7.76 GHz,束波功率转换效率达40%。     

光子晶体平面波导与脊波导高效耦合技术的研究

利用一维变周期谐振腔阵列和非线性缓变边界，可以实现光波从脊波导到光子晶体平面波导 （PCW）的高效耦合.基于平面波展开法（PWE）和时域有限差分法（FDTD），深入分析和讨 论了普通脊波导、2D-PCW结构和本征模以及工作模式、缓变边界形状等对耦合效率的影响， 从而得出光波从脊波导到2D-PCW、再返回脊波导的统一图景.指出考虑模式转换和采用缓变 边界条件可以极大提高PCW与脊波导间的耦合效率.对PC-PW边界采用线性和非线性缓变结构 进行了仿真，讨论了边界缓变程度对耦合效率的影响.结果表明，采用模式耦合和PC-PW余弦 缓变边界时的耦合效率在较宽的带宽内超过了95%. 关键词： 光子晶体波导 脊波导 PWE FDTD 耦合边界     

单个心肌细胞内钙波的微观动力学研究

利用基于近场光学原理构建的全内反射荧光显微镜研究了大鼠单个心肌细胞中的钙信号. 利用这种显微镜的快速成像和高信噪比的特点，观察到单个细胞中复杂的二维钙波斑图. 分析了单个钙信号释放事件在钙波形成、运动过程中的作用. 建立在fire-diffuse-fire模型基础上的模拟显示，由基本钙释放事件组成的钙波可以在心肌细胞中稳定存在. 此研究对进一步认识活体可激发系统的微观动力学行为有指导意义. 关键词： 近场光学 全内反射荧光显微镜 心肌细胞 钙波     

糠醇辅助的聚合凝胶法制备纳米Li4Ti5O12负极材料

以硝酸锂、钛酸正丁酯和糠醇为反应物,采用糠醇聚合凝胶法制备了纳米Li₄Ti₅O₁₂粉体．利用XRD、SEM和BET比表面测试对产物进行了表征,并研究了纳米Li₄Ti₅O₁₂粉体作为锂离子电池负极材料的电化学性能．在700℃或更高温度烧结时产物为纯相的尖晶石型．通过柠檬酸、聚乙烯吡咯烷酮、十六烷基三甲基溴化铵(CTAB)表面活性剂的加入能够减少产物颗粒的团聚程度,增大粉体的比表面积,提高其电化学性能．加入0.5 g CTAB、700℃烧结12 h的Li₄Ti₅O₁₂粉体展示出最高的比容量和最佳的循环性能,10 C下充电比容量高达156.7 mAh/g．     

提高物理实验质量的重要途径是引入微机技术

随着科技的发展和微机的推广及应用，在物理实验中引入微机技术已势在必行。本文就如何在物理实验中应用微机谈几点做法。     

Tunable directional beaming assisted by asymmetrical SPP excitation in a subwavelength metallic double slit

We present a design for tunable directional beaming through a subwavelength metallic double slit surrounded by dielectric surface-relief gratings.On-axis and off-axis beaming can be switched by controlling the incident angle to asymmetrically excite surface plasmon polaritons(SPPs) that are subsequently coupled out to propagating beams by the two gratings on the left and the right sides of the double slit.Furthermore,the division of optical power into two off-axis beaming directions can be tuned smoothly by varying the incident angle while keeping the total power almost unchanged.The mechanism of this effect is analyzed theoretically and verified using rigorous numerical simulations.     

Enhanced optical transmission through an array of compound unit with multiple concentric or eccentric annular apertures

In this paper, transmission properties through an array of compound unit with multiple concentric or eccentric annular apertures are numerically studied. It is demonstrated that the transmission of the compound structure is not a simple superposition of that of each annular aperture array but exhibit substantial changes in both the position and intensity of resonant peaks. It is also found that the gap plasmon resonance exhibit split peaks when the symmetry is broken, which can be well explained from the view of charge oscillation. These properties provide a method to achieve enhanced transmission in multi-frequencies simultaneously and are of significant applicable value to the design of tunable optical devices.     

C波段加速器初步热测实验

为了开展加速器小型化技术研究,进行了C波段2 MeV驻波加速器研制工作。目前,该加速器研制取得了显著进展,完成了全密封加速管的焊接,建立了加速器热测实验平台。在重复频率50 Hz情况下,进行了初步热测出束实验,利用电离室剂量仪测试了加速器靶前1 m处的X射线剂量率,并利用钢吸收法测试了电子束的能量。初步实验结果表明:电子束能量约2.5 MeV,剂量率超过330 mGy/(minm)。