Effect of microstructure on thermoelectric properties of CSD-grown Bi2Sr2Co2Oy thin films

Three Bi₂Sr₂Co₂O_y thin films with different microstructures have been prepared by chemical solution deposition on LaAlO₃(001) through varying the annealing temperature. With the decrease in the annealing temperature, both the size and c-axis alignment degree of grains in the film decrease as well, leading to an increase in the film resistivity. In addition, the decrease in the annealing temperature also results in a slight increase in the seebeck coefficient due to the enhanced energy filtering effect of small-grain film. The nanostructured Bi₂Sr₂Co₂O_y film with the average grain size of about 100 nm shows a power factor comparable to that of the films with larger grains. Since the thermal conductivity of the nanostrcutured films can be depressed due to the enhanced phonon scattering by grain boundary, a higher figure of merit is expected in Bi₂Sr₂Co₂O_y thin film with grains in nanometer size.     

Measurements of high pT light fragments at CM 90° in 800 A MEV C + C collisions

The spectra of high-p_T fragments have been measured at CM 90° in 800 A MeV C + C collisions for p_T up to 1.8 GeV/c (proton), 2.5 GeV/c (deuteron) and 2.8 GeV/c (triton) at the Bevalac. Invariant cross sections were measured down to eight orders of magnitude lower than those for production of low momentum protons. The proton spectrum shows a significant deviation from the Boltzmann shape in the high-energy region. The spectra of deuterons and tritons are explained well by, respectively, squaring and cubing the observed proton spectra.     

高效透明导电膜荧光屏的研究

介绍了一种新型荧光屏结构,采用透明导电膜代替传统荧光屏中的铝膜作电极.分别测试了新型荧光屏和传统荧光屏的加电特性.实验结果表明新型荧光屏具有较高的耐压性能,对提高X射线变像管的空间分辨率有重要作用,而且能延长变像管的寿命.采用透明导电膜制作荧光屏还具有工艺简单,成本低和成品率高的优点.     

高功率半导体激光端面泵浦方形掺Nd3+离子激光晶体热形变研究

为了解决高功率半导体激光器端面泵浦激光晶体引起的热效应问题,激光晶体泵浦端面的热形变必须进行准确的计算.通过对于全固态激光器中激光晶体的工作特点分析,建立了矩形截面激光晶体热分析模型.基于热传导方程,提出了泊松方程的一种新解,并获得了矩形截面激光晶体端面热形变分布的一般解析表达式.同时讨论了半导体激光器偏心泵浦激光晶体给端面热形变带来的影响.与有限元分析方法以及其他数值分析方法相比,解析分析方法不会给计算引入任何的误差.热形变的解析分析为解决激光晶体的热效应问题以及提高激光器的性能提供了理论的依据.     

一种用于电光开关的高速、高压电脉冲的产生

介绍了一种用于电光开关驱动源的高压超快电脉冲产生技术;电路采用级联的雪崩晶体管串和微波传输线结构,输出阻抗50Ω;在50Ω负载情况下,获得脉冲下降时间为1ns、幅度达到5kV、峰值电压为6.4 kV、幅度和半宽度稳定性优于2％、触发晃动为±15ps、触发延时为30 ns,脉冲峰值电流为128 A的高压高速大电流脉冲.     

球幕投影光学系统的设计与研究

设计了一种飞行训练使用的球幕投影仪光学系统.系统焦距为5.5mm, 相对孔径为1/4,全视场角175°,光谱范围为可见光波段,采用了3组10片的反远距型结构.与普通投影系统不同之处在于,该系统在保证大视场的前提下有效地减小了场曲对像质的影响.给出了球幕结构对场曲影响的定量分析以及较为方便的屏幕半径选择方法.因全部采用国产玻璃而同时满足了国产化的要求.     

1 J/pulse Q-switched 2 microm solid-state laser

Q-switched output of 1.1 J/pulse at a 2.053 microm wavelength has been achieved in a diode-pumped Ho: Tm: LuLF laser with a side-pumped rod configuration in a master-oscillator-power-amplifier (MOPA) architecture. This is the first time to our knowledge that a 2 microm laser has broken the joule per pulse barrier for Q-switched operation. The total system efficiency reaches 5% and 6.2% for single- and double-pulse operation, respectively. The system produces an excellent 1.4 times transform-limited beam quality.     

FeMnP_(1-x)T_x(T=Si,Ga,Ge)系列化合物机械性能的第一性原理研究

以密度泛函理论为基础,使用投影缀加波方法、VASP程序包研究了FeMnP_(1-x)T_x(T=Si,Ga,Ge)化合物的力学性质,结果表明FeMnP_(1-x)Ga_x化合物的晶格参数、弹性常数和电子结构与FeMnP_(1-x)Ge_x化合物比较接近,同时该化合物在力学上稳定,是预期具有较大的磁熵变和高磁热效应的材料.依据Pugh判据,FeMnP_(0.67)T_(0.33)(T=Si,Ga,Ge)化合物具有良好的延展性,三者之中FeMnP_(0.67)Ga_(0.33)韧性最好,FeMnP_(0.67)Si_(0.33)韧性相对较差,说明Ga替代P可改善此类化合物的机械性能.最后从化合物体系电子总态密度随不同掺杂T原子的演化规律解释了自洽计算得到的弹性常数的变化规律.     

新型干涉高光谱成像系统的光束剪切特性分析

提出了一种基于新型双折射横向剪切分束器的高光谱成像方法,采用的横向剪切分束器主要由Wollaston棱镜和角锥反射体组成.在分析双折射分束器的偏光结构和分光机理的基础上,利用光线追迹方法分析了光束在Wollaston棱镜中的传播特性,通过计算光束在双折射分束器中的传播方向及出射位置,推导出调制光程差的理论表达公式.根据理论推导结果,分别仿真分析了系统在不同扫描模式下光程差与入射光视场角以及角锥顶点偏移量的调制关系.基于理论分析结果搭建了实验装置,对光程差分析结果进行验证,实验结果与理论分析结果匹配较好.所提方法可以提高剪切光束的平行性,保证干涉条纹的高调制度,降低了复原光谱准确度对光学装调精度和元件加工精度的依赖性,具有结构稳定、复杂度低的显著特点.     

Strength and equation of state of molybdenum triboride under 80 GPa pressure,using radial X-ray diffraction

The strength and equation of state of molybdenum triboride have been determined under nonhydrostatic compression up to 80?GPa, using an angle-dispersive radial X-ray diffraction technique in a diamond anvil cell (DAC). The RXD data yield a bulk modulus and its pressure derivative as K_0?=?342(6)?GPa with K₀′?=?2.11(17) at ψ?=?54.7°. Analysis of diffraction data using the strain theory indicates that the ratio of differential stress to shear modulus (t/G) ranges from 0.002 to 0.050 at pressures of 4–80?GPa. Together with theoretical results on the high pressure shear modulus, our results here show that molybdenum triboride sample under uniaxial compression can support a differential stress of ～10?GPa when it started to yield with plastic deformation at ～30?GPa. In addition, we draw a conclusion that MoB₃ is not a superhard material but a hard material.