Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

The effect of the sorbital nucleating agent on properties of the ethylene-octene copolymer (POE) toughened polypropylene (PP) was studied. The results show that the addition of POE increases notched Izod and Charpy impact strength significantly but impair the tensile strength and flexural modulus. As a nucleating agent (1,3,2,4-di(p-methylbenzylidene) sorbitol, DM) was added, the toughness and stiffness of toughed PP increased simultaneously at the same content of POE. This result shows that the toughness and stiffness of toughed PP are in balance. Polarized light microscopy analysis shows that with the addition of POE and nucleating agent, only a low level of PP spherulites were observed.     

First alkyl radical additions to (eta(6)-arene)tricarbonylmanganese complexes

[reaction: see text] Reactions of alkylmercury chlorides with arene manganese tricarbonyl complexes in the presence of NaI led to the formation of the addition-reduction products. The mechanism was postulated to be the alkyl radical addition to ArMn(CO)3+ cation to form the corresponding 17 valence electron intermediate, which was then reduced by alkylmercury chloride via a singlet electron transfer process to afford the product and regenerate an alkyl radical.     

Study on the supramolecular system of TAPP with cyclodextrins by polarography

The interaction of cyclodextrins with meso- Tetrakis (4-N-trimethylaminobenzyl) porphyrin (TAPP) in 0.1 mol l(-1) phosphate buffer (pH 7.0, 20 degrees C) has been studied by polarography. The TAPP can form the 1:1 inclusion complex with Sulfobutylether-beta-cyclodextrin (SBE-beta-CD) and1:2 inclusion complexes with other four cyclodextrins. A new expression, which is used to calculate the inclusion constant for1:2 inclusion complex by polarography, has been educed and testified firstly in this paper. Furthermore, the inclusion abilities of different kinds of cyclodextrins are compared. The result shows the inclusion ability of anionic cyclodextrin SBE-beta-CD with cationic porphyrin TAPP is very strong. It suggests that the charge attraction between CDs and TAPP plays an important role in the inclusion procedure except for the hydrophobic effect. The inclusion formation of anionic cyclodextrins with drugs can increase released rate of drugs at high pH; therefore, the suparmolecular data for the controlled release of the drugs that owned the similar properties as hematoporphyrin have been offered by polarography in this paper.     

热处理对聚乙烯／炭黑导电复合体系形态结构及PTC特性的影响

借助ＷＡＸＤ、ＳＡＸＤ和ＤＳＣ等手段研究了炭黑与聚乙烯复合体系在不同热处理条件下的结晶行为及聚集态结构的大尺寸效应对ＰＴＣ特性的影响。由此提出，不仅结晶度大小，而且聚集大尺寸效应性能对ＰＴＣ行性有重要影响的新观点。     

加速剂对化学镀镍层组成与结构的影响

加速剂对化学镀镍层组成与结构的影响方景礼，武勇，韩克平，张敏（南京大学应用化学研究所配位化学国家重点实验室南京２１００９３）关键词化学镀镍，Ｎｉ０Ｐ合金，加速剂，硫脲化学镀镍磷合金具有耐蚀性、可焊性、厚度均匀和硬度高等优点，已得到广泛应用。为提高生产...     

天然和人工培植红景天挥发油的对比研究

应用ＧＣ－ＭＳ和ＧＣ－ＩＲ两种联机法对比研究了天然和人工培植红景天挥发油、分别鉴定出２７个和２４个化合物。ＭＳ给出结构信息和ＩＲ给出官能团信息相结合，提高了分析测试复杂样品的可靠性。     

Na3Fe(C2O4)3·5H2O的热解过程和FAB-MS断裂规律

以红外光谱法为主要手段，原位“跟踪”测定铁（Ⅲ）与乙二酸形成的配合物Ｎａ３Ｆｅ（Ｃ２Ｏ４）３．５Ｈ２Ｏ的热解过程，分析了气、固相热解产物。并以色谱分析、差热－热重分析和Ｘ－射线粉末衍射法定性、定量地验证其结果。测定了该配合物快原子轰击质谱，提出了断裂规律。铁的二元羧酸配合物的质谱尚属首见。     

过渡金属与二取代冠醚固态配合物的制备

由４＇，５＇－二碘苯并１５冠５，４＇，５＇－二溴苯并１５冠５，４＇－溴－５＇－硝基苯并１５冠５，四溴二苯并１８冠６与过渡全属Ｍｎ（Ⅱ）、Ｃｏ（Ⅱ）、Ｃｕ（Ⅱ）、Ｚｎ（Ⅱ）、Ａｇ（Ⅱ）、Ｃｄ（Ⅱ）的硝酸盐、高氯酸盐、气化物合成了１９个未见报道的固态配合物。用元素分析、红外光谱、摩尔电导和差热－热重分析等表征了它们的组成和性质。     

CoMoK／γ—Al2O3水煤气变换催化剂的硫化及反硫化

以Ｈ２Ｓ和ＣＳ２作硫化剂，用ＰＰＳ和ＴＰＤＳ方法研究了水煤气变换催化剂ＣｏＭｏＫ／γ－Ａｌ２Ｏ３的硫化及反硫化过程。用Ｈ２Ｓ／Ｈ２硫化时，只发现Ｈ２Ｓ的消耗和Ｈ２Ｏ的生成，用ＣＳ２／Ｈ２硫化时，只发现Ｈ２Ｓ的消耗和Ｈ２Ｏ的生成。用ＣＳ２／Ｈ２硫化时，首先生成ＣＯ２，然后是ＣＨ４，Ｈ２Ｏ和Ｈ２Ｓ，ＴＰＧ实验表明催化剂表面上积炭，造成催化剂和活性降低，但积炭在水煤变换反应进行了逐渐除法。ＴＰＤＳ实验表     

Molecularly imprinted sol-gel nanotubes membrane for biochemical separations

In this study, we report a simple procedure for applying molecular imprinting functional groups to the inner surfaces of the template-synthesized sol-gel nanotubes for chemical separation of estrone. The silica nanotubes were synthesized within the pores of nanopore alumina template membranes using a sol-gel method by simultaneous hydrolysis of a silica monomer-imprinted molecule complex and tetraethoxysilane (TEOS). A covalent imprinting strategy was employed by generating a sacrificial spacer through the reaction of the isocyanate group of 3-(triethoxysilyl)propyl isocyanate and a phenol moiety of estrone to form a thermally cleavable urethane bond. This allowed us to remove the imprinted estrone by simple thermal reaction and to simultaneously introduce functional groups into the cavity formed by the silica nanotubes. Experiments indicated that estrone could be bound selectively by such an approach and have a binding affinity of 864 +/- 137 (n = 3).