Cobalt(III) corroles as electrocatalysts for the reduction of dioxygen: reactivity of a monocorrole, biscorroles, and porphyrin-corrole dyads

Three series of cobalt(III) corroles were tested as catalysts for the electroreduction of dioxygen to water. One was a simple monocorrole represented as (Me(4)Ph(5)Cor)Co, one a face-to-face biscorrole linked by an anthracene (A), biphenylene (B), 9,9-dimethylxanthene (X), dibenzofuran (O) or dibenzothiophene (S) bridge, (BCY)Co(2) (with Y = A, B, X, O or S), and one a face-to-face bismacrocyclic complex, (PCY)Co(2), containing a Co(II) porphyrin and a Co(III) corrole also linked by one of the above rigid spacers (Y = A, B, X, or O). Cyclic voltammetry and rotating ring-disk electrode voltammetry were both used to examine the catalytic activity of the cobalt complexes in acid media. The mixed valent Co(II)/Co(III) complexes, (PCY)Co(2), and the biscorrole complexes, (BCY)Co(2), which contain two Co(III) ions in their air-stable forms, all provide a direct four-electron pathway for the reduction of O(2) to H(2)O in aqueous acidic electrolyte when adsorbed on a graphite electrode, with the most efficient process being observed in the case of the complexes having an anthracene spacer. A relatively small amount of hydrogen peroxide was detected at the ring electrode in the vicinity of E(1/2) which was located at 0.47 V vs SCE for (PCA)Co(2) and 0.39 V vs SCE for (BCA)Co(2). The cobalt(III) monocorrole (Me(4)Ph(5)Cor)Co also catalyzes the electroreduction of dioxygen at E(1/2) = 0.38 V with the final products being an approximate 50% mixture of H(2)O(2) and H(2)O.     

Alkyl- and aryl-substituted corroles. 5. Synthesis, physicochemical properties, and X-ray structural characterization of copper biscorroles and porphyrin-corrole dyads

The synthesis and characterization of cofacial copper biscorroles and porphyrin-corroles linked by a biphenylenyl or anthracenyl spacer are described. The investigated compounds are represented as (BCA)Cu(2) and (BCB)Cu(2) in the case of the biscorrole (BC) derivatives and (PCA)Cu(2) and (PCB)Cu(2) in the case of porphyrin (P)-corrole (C) dyads, where A and B represent the anthracenyl and biphenylenyl bridges, respectively. A related monomeric corrole (Me(4)Ph(5)Cor)Cu and monomeric porphyrin (Me(2)Et(6)PhP)Cu that comprise the two halves of the porphyrin-corrole dyads were also studied. Electron spin resonance (ESR), (1)H NMR, and magnetic measurements data demonstrate that the copper corrole macrocycle, when linked to another copper corrole or copper(II) porphyrin, can be considered to be a Cu(III) complex in equilibrium with a Cu(II) radical species, copper(III) corrole being the main oxidation state of the corrole species at all temperatures. The cofacial orientation of (BCB)Cu(2), (BCA)Cu(2), and (PCB)Cu(2) was confirmed by X-ray crystallography. Structural data: (BCB)Cu(2)(C(110)H(82)N(8)Cu(2).3CDCl(3)), triclinic, space group P, a = 10.2550(2) A, b = 16.3890(3) A, c = 29.7910(8) A, alpha = 74.792(1) degrees , beta = 81.681(1) degrees , gamma = 72.504(2) degrees , Z = 2; (BCA)Cu(2)(C(112)H(84)N(8)Cu(2).C(7)H(8).1.5H(2)O), monoclinic, space group P 2(1)/c, a = 16.0870(4) A, b = 35.109(2) A, c = 19.1390(8) A, beta = 95.183(3) degrees , Z = 4; (PCB)Cu(2)(C(89)H(71)N(8)Cu(2).CHCl(3)), monoclinic, space group P2(1)/n, a = 16.7071(3) A, b = 10.6719(2) A, c = 40.8555(8) A, beta = 100.870(1) degrees , Z = 4. The two cofacial biscorroles, (BCA)Cu(2) and (BCB)Cu(2), both show three electrooxidations under the same solution conditions. The reduction of (BCA)Cu(2) involves a reversible electron addition to each macrocycle at the same potential of E(1/2) = -0.20 V although (BCB)Cu(2) is reversibly reduced in two steps to give first [(BCB)Cu(2)](-) and then [(BCB)Cu(2)](2)(-), each of which was characterized by ESR spectroscopy as containing a Cu(II) center. These latter electrode reactions occur at E(1/2) = -0.36 and -0.51 V versus a saturated calomel reference electrode. The half-reduced and fully reduced (BCB)Cu(2) show similar Cu(II) ESR spectra, and no evidence of a triplet signal is observed. The two well-separated reductions of (BCB)Cu(2) to give [(BCB)Cu(2)](2)(-) can be attributed to a stronger pi-pi interaction between the two macrocycles of this dimer as compared to those of (BCA)Cu(2). The copper porphyrin-corrole dyads, (PCA)Cu(2) and (PCB)Cu(2), show five reversible oxidations and two reversible reductions, and these potentials are compared with corresponding values for electrochemical reactions of the porphyrin and corrole monomers under the same solution conditions.     

Physicochemical Characterization of Four Gadolinium(III) DTPA‐like Complexes

The analysis of ¹⁷O NMR transverse relaxation rates and EPR transverse electronic relaxation rates for aqueous solutions of the four DTPA‐like (DTPA = diethylenetriamine‐N,N,N′,N″,N″‐pentaacetic acid) complexes, [Gd(DTPA‐PY)(H₂O)]^? (DTPA‐PY = N′‐(2‐pyridylmethyl)), [Gd(DTPA‐HP)(H₂O)₂]^? (DTPA‐HP = N′‐(2‐hydroxypropyl)), [Gd(DTPA‐H1P)(H₂O)₂]^? (DTPA‐H1P = N′‐(2‐hydroxy‐1‐phenylethyl)) and [Gd(DTPA‐H2P)(H₂O)₂] (DTPA‐H2P = N′‐(2‐hydroxy‐2‐phenylethyl)), at various temperatures allows us to understand the water exchange dynamics of these four complexes. The water‐exchange lifetime (τM) parameters for [Gd(DTPA‐PY)(H₂O)]^?, [Gd(DTPA‐HP)(H₂O)₂]^?, [Gd(DTPA‐H1P)(H₂O)₂]^? and [Gd(DTPA‐H2P)(H₂O)₂] are of 585, 98, 163, and 69 ns, respectively. Compared with [Gd(DTPA)(H₂O)]^2? (τM = 303 ns), the τM value of [Gd(DTPA‐PY)(H₂O)]^? is slightly higher, but the other three complexes values are significantly lower than those of [Gd(DTPA)(H₂O)]^2?. This difference is explained by the fact that the gadolinium(III) complexes of DTPA‐HP, DTPA‐H1P, and DTPA‐H2P have two inner‐sphere waters. The ²H longitudinal relaxation rates of the labeled diamagnetic lanthanum complex allow the calculation of its rotational correlation time (τR). The τR values calculated for DTPA‐PY, DTPA‐HP, DTPA‐H1P, and DTPA‐H2P are of 127, 110, 142 and 147 ps, respectively. These four values are higher than the value of [La(DTPA)]^2? (τR = 103 ps), because the rotational correlation time is related to the magnitude of its molecular weight.     

催化裂解C2H2制备空心碳球

在高岭土负载的镍催化剂上,于850 ℃催化裂解乙炔制备了直径约500 nm 的空心碳球.用XRD、TEM、SEM和显微激光Raman光谱对所得的碳球及催化剂进行了表征,并初步探讨了反应机理.     

拟南芥抗镧突变体筛选条件的研究

以模式植物拟南芥为材料,采用组织培养的方法,以幼苗根的向地性弯曲生长为突变指标,对拟南芥抗La突变体筛选条件进行了研究。结果表明,1/2MS La培养基不能作为抗La突变体的筛选培养基,而以MS培养基预先培养幼苗,然后将其转入纯La培养基培养的筛选方法可以确定。以5.5作为选择培养基的初始和最终pH值,在1%琼脂浓度下,达到较好的凝固效果。纯La培养基中14 mg.kg-1La3 完全抑制了拟南芥幼苗根的生长,以此浓度为最适宜筛选压力。该项研究将为拟南芥抗稀土突变体的筛选提供技术依据。     

酸度对2-十八胺基甲酰基-8-羟基喹啉成膜性能的影响

两亲分子的成膜性能的研究主要集中在以羧基、磺酸基、磷酸基和第四铵盐等为亲水头基的化合物[1 ,2 ] ,而对亲水头基中兼有酸、碱性基团的两亲配体研究很少 ,本文报道了我们合成的一种新型两亲配体 2 -十八胺基甲酰基 - 8-羟基喹啉 (以下简写为 HL)在不同 p H的亚相溶液中单分子膜的形成。结果表明 ,HL在酸性亚相中不易成膜 ,而在碱性亚相中成膜性能较好 ,单分子膜由膨胀型向压缩型转变。并且讨论了亚相 p H对 HL单分子膜崩溃压的影响 ,以及 8-羟基喹啉头基在气 /液界面上的离解 -缔合情况。实　验　部　分一 .试剂与仪器2 -十八胺基甲…     

Design of nanostructured ceria-based solid electrolytes for development of IT-SOFC

A considerable interest has been shown in the application of doped ceria (CeO₂) compounds for “intermediate” (300–500 °C) temperature operation of solid oxide fuel cells. The microdomains with ordered structure of oxygen vacancy were observed in the microstructure of the M-doped CeO₂-sintered bodies (where M: Gd, Y, and Dy). We have previously shown that the conductivity of doped CeO₂-sintered bodies was lower when the sintered body contained large microdomains within grains. As a consequence of this observation, we have examined the grain size dependence and dopant content on conductivity in specimens where we adjust the microdomain size and a degree of oxygen vacancy ordering in the microdomains by controlling the microstructure. The microdomain size control in Dy-doped CeO₂ specimens was obtained by combining pulsed electric current sintering and conventional sintering. Using these techniques, we were able to improve the conductivity in Dy-doped CeO₂ specimens to a point where it became comparable to that of the more conventional Gd-doped CeO₂ specimens. It is concluded that by combining ultimate high-resolution analysis of these nanostructures with the adjusting processing route design, it is possible to further develop these materials in CeO₂-doped fuel cell application.     

Control of the site and potential of reduction and oxidation processes in pi-expanded quinoxalinoporphyrins

Quinoxalino[2,3-b]porphyrins are pi-expanded porphyrins, having a quinoxaline fused to a beta,beta-pyrrolic position of the porphyrin. They are used as components in systems proposed as molecular wires. Knowledge of their redox properties is of value in the design of electron- or hole-conduction systems. In particular, the location of the charge density in the radical anions of quinoxalinoporphyrins can be modulated by peripheral functionalization. New theoretical treatments of electrochemical potentials are developed that identify the site of reduction in both the anions and the dianions of 33 quinoxalinoporphyrins. These molecules include free-base and metallated macrocycles substituted on the quinoxaline with electron-withdrawing groups (NO2, Cl, Br) and/or electron-donating groups (NH2, OCH3). Spectroelectrochemistry, density-functional theory calculations, and substituent-parameter models are used to verify the analysis. Five distinct patterns are observed for the locations of the first and second reductions; some of these patterns involve delocalized charges. Nitroquinoxalinoporphyrins with the nitro groups at the 5- and 6-quinoxaline positions are found to have quite different properties owing to distortions caused by peri interactions that force the nitro group of the 5-nitro regioisomer out of conjugation. Charge localization on the nitroquinoxaline fragment is found for some molecules, and this is attributed to ion-pairing with the 0.1 M tetrabutylammonium perchlorate electrolyte used, leading to the verified prediction that electron-paramagnetic resonance spectra of these molecules taken without the electrolyte yield delocalized anions. These properties enable the control of conduction through molecular wires synthesised from quinoxalinoporphyrins.