[Cu(X-salicylato)2(N,N-diethylnicotinamide)2(H2O)2] complexes: conformational polymorphism and its consequence in supramolecular hydrogen-bonding networks formation

Novel copper(II) X-salicylate complexes with N,N-diethylnicotinamide (dena) of the formula [Cu(RCOO)₂(dena)₂(H₂O)₂] (RCOO = 3-methylsalicylate anion (3-Mesal, 1), 4-methylsalicylate anion (4-Mesal, 2), 5-methylsalicylate anion (5-Mesal, 3), 5-methoxysalicylate anion (5-MeOsal, 4) or 4-methoxysalicylate anion (4-MeOsal, 5)), and complex [Cu(3-MeOsal)₂(dena)₂(H₂O)₂]∙2H₂O (3-MeOsal = 3-methoxysalicylate anion (6)) have been prepared in the crystalline forms and characterized by spectroscopic methods (IR, Vis–UV, EPR). All the compounds according to their composition (1–5) seem to possess octahedral copper(II) stereochemistry. The complex 1 has been prepared in two different forms. X-ray analyses of the complexes 1, 4, and 5 were carried out and they featured a tetragonal-bipyramidal geometry around the copper atoms. The tetragonal planes are created by X-salicylate anions bonded to the copper(II) atoms via unidentate carboxylate oxygen atoms and the pyridine ring nitrogen atoms of the neutral ligand N,N-diethylnicotinamide, while in axial positions are water molecules. The two forms of complex 1 present conformation polymorphs and supramolecular isomers.     

Analysis of multiple mycotoxins in beer employing (ultra)-high-resolution mass spectrometry

The objective of the presented study was to develop and optimize a simple, high-throughput method for the control of 32 mycotoxins (Fusarium and Alternaria toxins, aflatoxins, ergot alkaloids, ochratoxins, and sterigmatocystin) in beer. Due to the broad range of their physicochemical properties, the sample preparation step was simplified as much as possible to avoid analyte losses. The addition of acetonitrile to beer samples enabled precipitation of abundant matrix components. The clean-up efficiency was controlled by ambient mass spectrometry employing a direct analysis in real time (DART) ion source. For determination of analytes, ultra-high-performance liquid chromatography hyphenated with high-resolution mass spectrometry utilizing an orbitrap (U-HPLC-orbitrapMS) or time-of-flight (TOFMS) technology was used. Because of significantly better detection capabilities of the orbitrap technology, the U-HPLC-orbitrapMS method was chosen as a determinative step and fully validated. To compensate matrix effects, matrix-matched calibration was employed. The lowest calibration levels for most of the target mycotoxins ranged from 1 to 8 μg L(-1) beer and the recoveries of analytes were in range from 86 to 124%.     

Iminodiacetic acid-modified magnetic poly(2-hydroxyethyl methacrylate)-based microspheres for phosphopeptide enrichment

Magnetic non-porous hydrophilic poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) microspheres prepared by the dispersion polymerization and modified with iminodiacetic acid (IDA) were employed for the IMAC separation of phosphopeptides. Fe³⁺ and Ga³⁺ ions immobilized on IDA-modified magnetic microspheres were used for the enrichment of phosphopeptides from the proteolytic digests of two model proteins differing in their physico-chemical properties and phosphate group content: porcine pepsin A and bovine α-casein. The optimum conditions for phosphopeptide adsorption and desorption in both cases were investigated and compared. The phosphopeptides separated from the proteolytic digests were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The ability of the prepared Fe³⁺- and Ga³⁺-IDA-modified magnetic microspheres to capture phosphopeptides from complex mixtures was shown on an example of bovine milk proteolytic digest.     

Subalgebras, Intervals, and Central Elements of Generalized Effect Algebras

The relation between generalized effect algebrasand D-algebras and their subalgebras are discussed. Forgeneralized effect algebras the notion of centralelements is introduced and some of their properties are shown.     

Properties of Quasi-Hermitian Operators Inherited from Self-Adjoint Operators

We study a generalized effect algebra of unbounded linear operators in an infinite-dimensional complex Hilbert space. This algebra equipped with a certain kind of topology allows us to show that unbounded quasi-Hermitian operators can be expressed as a difference of two infinite sums of bounded quasi-Hermitian operators.     

Design and economics of industrial production of fructooligosaccharides

A process for industrial production of fructooligosaccharides (FOS’s) based on the conversion of sucrose by immobilized fructosyltransferase (FTase) from the cells of Aureobasidium pullulans CCY 27-1-94 was developed. Particular process operations and conditions were designed employing results of laboratory and semi-pilot scale experiments. The process flowsheet comprised three sections: FTase production, which included fermentation, isolation and purification of the enzyme, FTase immobilization and FOS’s production where a product with a high content of FOS’s was prepared by the removal of glucose, fructose and unreacted sucrose from the reaction mixture using simulated moving-bed chromatography. Two alternative process flowsheets were proposed for the annual production of 10 000 t of FOS’s: one for a powdery product and the second one for syrup. The economic analysis provided the costs for the production of immobilized FTase and FOS’s using two different price estimates for sucrose.     

Carboxyl groups in pre-treated regenerated cellulose fibres

The influence of peroxide bleaching and slack-mercerization on the amount of acidic groups in regenerated fibres (viscose, modal and lyocell) were studied. Conductometric titration was used to determine the total content of acidic carboxylic groups. Polyelectrolyte titration was used for surface and total charge determination, and to obtain information about the charge distribution and accessibilities of charged groups. Changes in fibre crystallinity to pre-treatment processes were characterized using iodine sorption (Schwertassek method) and correlated to treatments and the amount of carboxylic groups. For all three types of fibres the amount of accessible carboxyl groups was lowered by an increase in the degree of crystallinity. Bleaching with hydrogen peroxide causes some oxidative cellulose damage and, therefore, a larger amount of carboxyl groups (presumably formed at the end of cellulose chains). Slack-mercerization did not significantly change the total amount of acidic groups in the fibres, but their accessibility to cationic polyelectrolytes, in particular to polymers with high molecular weight was substantially lowered. Lidija Fras Zemljič, Zdenka Peršin, and Karin Stana Kleinschek are the members of the European Polysaccharide Network of Excellence (EPNOE).     

Analytical artefacts in the speciation of arsenic in clinical samples

Urine and blood samples of cancer patients, treated with high doses of arsenic trioxide were analysed for arsenic species using HPLC-HGAFS and, in some cases, HPLC-ICPMS. Total arsenic was determined with either flow injection-HGAFS in urine or radiochemical neutron activation analysis in blood fractions (in serum/plasma, blood cells). The total arsenic concentrations (during prolonged, daily/weekly arsenic trioxide therapy) were in the μg mL⁻¹ range for urine and in the ng g⁻¹ range for blood fractions. The main arsenic species found in urine were As(III), MA and DMA and in blood As(V), MA and DMA.With proper sample preparation and storage of urine (no preservation agents/storage in liquid nitrogen) no analytical artefacts were observed and absence of significant amounts of alleged trivalent metabolites was proven. On the contrary, in blood samples a certain amount of arsenic can get lost in the speciation procedure what was especially noticeable for the blood cells although also plasma/serum gave rise to some disappearance of arsenic. The latter losses may be attributed to precipitation of As(III)-containing proteins/peptides during the methanol/water extraction procedure whereas the former losses were due to loss of specific As(III)-complexing proteins/peptides (e.g. cysteine, metallothionein, reduced GSH, ferritin) on the column (Hamilton PRP-X100) during the separation procedure. Contemporary analytical protocols are not able to completely avoid artefacts due to losses from the sampling to the detection stage so that it is recommended to be careful with the explanation of results, particularly regarding metabolic and pharmacokinetic interpretations, and always aim to compare the sum of species with the total arsenic concentration determined independently.     

A study of the effects of column porosity on gradient separations of proteins

The type of the stationary phase for reversed-phase liquid chromatography significantly affects the sample elution. Hydrodynamic properties, efficiency and gradient elution of proteins were investigated on five commercial C18 columns with wide-pore totally porous particles, with superficially porous layer particles, non-porous particles and a silica-based monolithic bed. The efficiency in the terms of reduced plate height is higher for low-molecular ethylbenzene than for proteins, but depends on the character of the pores in the individual columns tested. The superficially porous Poroshell and the non-porous Micra columns provide the best efficiency for proteins at high mobile phase flow rates, probably because of similar pore architecture in the stationary phase. The Zorbax column with similar pore architecture as the Poroshell active layer, i.e. narrow pore distribution of wider pores shows better efficiency than the packed column with narrow pores and broad pore distribution. The monolithic column shows lower efficiency for proteins at high flow rates, but it performs better than the broad-pore distribution totally porous particulate columns. Different pore architecture affects also the retention and selectivity for proteins on the individual columns. The retention times on all columns can be predicted using the model for reversed-phase gradient elution developed originally for low-molecular compounds. Consideration of the limited pore volume accessible to the biopolymers has negligible effect on the prediction of retention on the columns packed with non-porous or superficially porous particles, but improves the accuracy of the predicted data for the totally porous columns with broad pore distribution.