A combined experimental and computational investigation of the binary mixtures of 2-methylcyclohexanol and isobutanol

Structural Chemistry - The measured densities and viscosities of the binary mixtures of the isobutanol and 2-methylcyclohexanol were reported experimentally in a certain range of concentrations at...     

The role of hydrogen bonds in thermodynamic and structural properties in binary mixtures of morpholine + 2-methylcyclohexanol: a combined experimental and computational study

Structural Chemistry - Thermodynamic properties of binary mixtures of 2-methylcyclohexanol with morpholine are measured as a function of composition and temperature. The excess molar volumes were...     

Amplified cathodic electrochemiluminescence of luminol based on zinc oxide nanoparticle modified Ni-foam electrode for ultrasensitive detection of amoxicillin

Journal of Solid State Electrochemistry - Here is reported a new feasible and facile method for the determination of amoxicillin by the electrochemiluminescence (ECL) method. The ECL signal was...     

A Novel Non-enzymatic Selective and Sensitive Glucose Sensor Based on Nickel-Copper Oxide@3D-rGO/MWCNTs

In this work, a modified 3D-rGO/MWCNT with nickel and copper oxide nanoparticles were synthesized. The structural properties of this nanocomposite were investigated by several techniques. The fabricated sensor at optimum condition potential of +0.60 V (vs. Ag/AgCl) and a rotational rate of 1800 rpm gave a detection limit of 0.04 μmol L⁻¹ with two dynamic ranges of 0.10–300 and 300–900 μmol L⁻¹ glucose with high stability. The good accuracy of the fabricated sensor was proved in the determination of glucose in a blood sample (with recoveries between 95 % to 105 % and RSDs of 1.2 to 2.5 %).     

Comparison of Air-Assisted,Vortex-Assisted and Ultrasound-Assisted Dispersive Liquid–Liquid Microextraction for the Determination of BTEX Compounds in Water Samples Prior to GC-FID Analysis

Three new dispersive liquid–liquid microextraction (DLLME) methods, air-assisted (AA-DLLME), vortex-assisted (VA-DLLME) and ultrasound-assisted (UA-DLLME), were compared from the point of view of their analytical application for preconcentration of trace amounts of benzene, toluene, ethylbenzene and xylene isomers (BTEX) in water samples. In all of these methods, no dispersive solvent is required and dispersion of extractant is carried out by air bubbles, vortex and ultrasound for AA-DLLEM, VA-DLLME, and UA-DLLME, respectively. Advantages and disadvantages of these three liquid phase microextraction methods and their capability in dispersion of a similar extractant phase in sample solutions were comprehensively compared. All other extraction parameters, which have an influence on the microextraction, were also investigated and optimized. Under optimized conditions, analytical figures of merit for the three techniques were determined and compared. It was found that the limit of detection of the three methods is almost the same, while AA-DLLME has a wider linear dynamic range and the shortest analysis time. Enrichment factors of 182, 45 and 245 were achieved for AA-DLLEM, VA-DLLME, and UA-DLLME, respectively.     

Determination of Biogenic Amines in Cheese Using Simultaneous Derivatization and Microextraction Method Followed by Gas Chromatography–Mass Spectrometry

Microwave-assisted extraction and dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry as a sensitive and efficient method was applied to extract and determine four biogenic amines (BAs) in Iranian Lighvan cheese samples. Carrez solutions were used for the sedimentation of proteins. Effective factors on the performance of microextraction were studied and optimized. The proposed method showed good linear ranges from 5 to 500 ng mL^?1, with the coefficients of determination higher than 0.9929. Average recoveries were between 97 and 103%. Limits of detection for all analyzed BAs ranged from 5.9 to 14.0 ng g^?1, and limits of quantitation ranged between 19.7 and 46.2 ng g^?1. Compared with previous methods, the proposed method is simple, fast, accurate, and precise and gives low detection limits for investigating trace amounts of BAs in Iranian Lighvan cheese samples. The levels of four BAs were determined in five Lighvan cheese samples. Cadaverine was found as prevailing amine in the cheese samples. Putrescine, tyramine, and histamine were present at the second, third, and fourth highest levels, respectively.     

Atom transfer radical polymerization of methyl methacrylate using copper-based homogeneous and heterogeneous catalysts

This study aimed at polymerization of methyl methacrylate with novel catalysts in the atom transfer radical polymerization (ATRP) condition at 90 °C. This was accomplished using CuBr/N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (CuBr–AEAPTMS) as a homogeneous catalyst and one time with CuBr@AEAPTMS/SBA-15 as a heterogeneous catalyst. Catalysts were characterized using TGA, FT-IR, and UV–Vis spectroscopy. The structural analysis of the polymer was carried out by ¹³C NMR spectroscopy and GPC. Three characteristic parts of polymer produced by ATRP method including the initiator, monomer units, and end group was shown in ¹³C NMR spectra. In addition, the presence of C–Br unit showed that the polymerization process is alive. The ¹H NMR analysis was used for kinetic investigation of methyl methacrylate polymerization with homogeneous and heterogeneous catalysts that showed high monomer conversion (98 and 90% after 35 min, respectively) and good control of molecular weight with a dispersity (Р= 1.5–1.7). In addition, the plot of ln ([monomer]₀/[monomer] _t ) versus time gave linear relationships indicating a constant concentration of the propagating species throughout the polymerization. Finally, the results of the polymerization using heterogeneous catalyst compared with homogeneous catalyst revealed that it was according to ATRP method.     

Rapid production of monodisperse cross-linked red blood corpuscle-like particles via scalable one-pot dispersion polymerization

Cross-linked polystyrene (PS) particles having red blood corpuscle (RBC)-like shape were synthesized by one-pot dispersion polymerization of styrene with ethanol/water mixture and ethylene glycol dimethacrylate (EGDMA) as the reaction medium and cross-linker, respectively. Monitoring of the reaction showed that RBC-like shape forms due to asymmetric shrinkage of a cross-linked network during the phase separation. In addition, three dimensional phase diagram was generated based on the yielded data that showed that the formation of such unique shape extremely depends on the polarity of the medium and injection time of the cross-linker. In situ synthesis of RBC-like particles, as promising biomaterials in targeted drug delivery and a model for the understanding of the cell behavior, via such fast and high solid content approach makes it to be conducive to subsequent scale up, i.e. potential commercial adoption.     

Magnetically nano core–shell Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Cu(OH)<Subscript>x</Subscript>: a highly efficient and reusable catalyst for rapid and green reduction of nitro compounds

Magnetically separable nano core–shell Fe₃O₄@Cu(OH)_x with 22 % Cu content was prepared by the addition of sodium hydroxide to a mixture of CuCl₂·2H₂O and nano Fe₃O₄ in water. Characterization of the impregnated copper hydroxide was carried out by X-ray fluorescence (XRF), X-ray diffraction (XRD) atomic absorption spectroscopy (AAS), scanning electron microscopy (SEM), value stream mapping (VSM) and Brunauer–Emmett–Teller (BET) analysis. The core–shell nanocatalyst exhibited the excellent catalytic activity toward reduction of various nitro compounds to the corresponding amines with NaBH₄. All reactions were carried out in H₂O (55–60 °C) within 3–15 min to afford amines in high to excellent yields. Reusability of core–shell Cu(OH)_x catalyst was examined 9 times without significant loss of its catalytic activity.     

Synthesis of new dyes containing double tetrazole groups for sensitization of TiO<Subscript>2</Subscript> nanoparticles in dye-sensitized solar cells

Di(1H-tetrazol-5-yl)methane is employed as a new electron acceptor group in the synthesis of two metal-free organic dyes containing triphenylamine donor group. Dye-sensitized nanocrystalline TiO₂ solar cell (DSSC) applying these novel dyes is constructed for consideration of their photovoltaic properties. The electronic properties of the dyes are also considered with the aid of theoretical calculations. The DSSC constructed from 4-(2,2-di(1H-tetrazol-5-yl)vinyl)-N,N-diphenylaniline (T1) shows a short-circuit photocurrent density of 13.38 mA cm^?2, an open circuit voltage of 578 mV, and a fill factor of 0.54, with a resulted solar energy-to-electricity conversion efficiency of 4.18% under simulated 1 sun irradiation (100 mW cm^?2). This result reveals that the dye with the di(1H-tetrazol-5-yl)methane anchoring group injects more electrons to the conduction band of TiO₂ in comparison with its analogs with single tetrazole ring in their anchoring group. It is found that in spite of a red-shift of the absorption spectrum resulted from the lengthening of the molecule, the dye with two di(1H-tetrazol-5-yl)methane groups gives lower performance than the dye with a single electron acceptor.