Synthesis and Characterization of H3PW12O40 and H3PMo12O40 Nanoparticles by a Simple Method

In this study H₃PW₁₂O₄₀·9H₂O and H₃PMo₁₂O₄₀·6H₂O (HPA) particles were changed into nano forms by heat-treatment in an autoclave as a simple, repaid, inexpensive and one step method. The particle size of these nanoparticles was around 25 nm. The as-synthesized nanostructures were characterized by dynamic light scattering, X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy and inductively coupled plasma analyzer. Thermal stability of nanoparticles was surveyed by thermal gravimeter analyse. Acidity of prepared nanoparticles was investigated by pyridine adsorption method. Results showed rising acidity by declining particle size of HPA.     

Synthesis, Characterization, Spectroscopy and Study of Antimicrobial Properties of Two New Substituted Trichloroaluminate（Ⅲ） Complexes [AlCl3X]- （X = SCN-, CN-）

The synthesis and characterization of two new aluminate(Ⅲ) complexes with general formula K[AlCl3X] are reported. These compounds derived from aluminate trichloride and related salts. Potassium trichlorothiocyanoaluminate, PCTA, and potassium trichlorocyanatoalu-minate, PCCA, are two new ionic aluminate complexes. They can be easily synthesized in a nearly quantitative yield by using the direct reaction of AlCl3 and KX. The complexes were characterized by physico-chemical and spectroscopic methods. Theoretical calculations have been used for the extraction of structural and spectroscopic data of these new synthesized complexes. The antibacterial activities of such compounds were studied against the Staphylococcus aureus, Escherichia coli, Staphylococcus Epidermidis, Estreptococo B and Shigella.     

Comparison of luminescence ADP production assay and radiometric scintillation proximity assay for Cdc7 kinase

Several assay technologies have been successfully adapted and used in HTS to screen for protein kinase inhibitors; however, emerging comparative analysis studies report very low hit overlap between the different technologies, which challenges the working assumption that hit identification is not dependent on the assay method of choice. To help address this issue, we performed two screens on the cancer target, Cdc7-Dbf4 heterodimeric protein kinase, using a direct assay detection method measuring [(33)P]-phosphate incorporation into the substrate and an indirect method measuring residual ADP production using luminescence. We conducted the two screens under similar conditions, where in one, we measured [(33)P]-phosphate incorporation using scintillation proximity assay (SPA), and in the other, we detected luminescence signal of the ATP-dependent luciferase after regenerating ATP from residual ADP (LUM). Surprisingly, little or no correlation were observed between the positives identified by the two methods; at a threshold of 30% inhibition, 25 positives were identified in the LUM screen whereas the SPA screen only identified two positives, Tannic acid and Gentian violet, with Tannic acid being common to both. We tested 20 out of the 25 positive compounds in secondary confirmatory study and confirmed 12 compounds including Tannic acid as Cdc7-Dbf4 kinase inhibitors. Gentian violet, which was only positive in the SPA screen, inhibited luminescence detection and categorized as a false positive. This report demonstrates the strong impact in detection format on the success of a screening campaign and the importance of carefully designed confirmatory assays to eliminate those compounds that target the detection part of the assay.     

Nuclear model calculation on charge particle induced reaction on Rb and Kr targets and targetry for 82Sr production

The ⁸²Sr/⁸²Rb radionuclide generator is used very commonly in positron emission tomography. ALICE/ASH and TALYS 1.0 codes were used to calculate excitation functions for proton, alpha and ³He induced on various targets that lead to produce ⁸²Sr radioisotope using intermediate energy accelerators. Recommended thickness of the targets according to SRIM code was premeditated. The application of those data, particularly in the calculation of integral yields, is discussed and theoretical integral yields for any reaction were computed. To consider precision of TALYS 1.0 code calculations, ⁸⁵Rb(p,4n)⁸²Sr process was determined as most interesting one due to radionuclide purity. The TALYS 1.0 code predicts a maximum cross-section of about 130 mb at 47 MeV for this reaction. Rubidium chloride deposition on copper substrate was carried out via sedimentation method in order to produce ⁸²Sr. 2.98 g RbCl, 1.043 g ethyl cellulose, 10 mL acetone were used to prepare a layer of enriched rubidium chloride of 11.69 cm² area and 0.34 g/cm² thickness.     

Microwave‐enhanced rapid synthesis of organosoluble polyamides based on 5‐(3‐acetoxynaphthoylamino)‐isophthalic acid

A series of photoactive polyamides (PAs) containing acetoxynaphthalamide side chain with inherent viscosities of 0.27–0.56 dl g^?1 were prepared by the direct polycondensation reaction of the 5‐(3‐acetoxynaphthoylamino)isophthalic acid with various commercially available diamines by means of triphenyl phosphite (TPP) and pyridine (Py) in the presence of calcium chloride and N‐methyl‐2‐pyrrolidone (NMP) under microwave irradiation and conventional heating conditions. Most of the resulting PAs are soluble in strong polar solvents such as N,N‐dimethylformamide (DMF), N,N‐dimethylacetamide, and NMP. Thermo‐gravimetric analysis (TGA) showed that polymers are thermally stable, 10% weight loss temperatures in excess of 320 and 378°C, and char yields at 600°C in nitrogen higher than 60%. These macromolecules exhibited maximum UV‐Vis absorption at 265 and 300 nm in a DMF solution. Their photoluminescence in the DMF solution demonstrated fluorescence emission maxima around 361 and 427 nm for all of the PAs. Copyright © 2008 John Wiley & Sons, Ltd.     

Simple protocol for the synthesis of the asymmetric PCP pincer ligand [C6H4-1-(CH2PPh2)-3-(CH(CH3)PPh2)] and its Pd(II) derivative [PdCl{C6H3-2-(CH2PPh2)-6-(CH(CH3)PPh2)}]

The asymmetric PCP pincer ligand [C₆H₄-1-(CH₂PPh₂)-3-(CH(CH₃)PPh₂)] (4) has been synthesized in a facile manner in three simple steps in high yield. Metallation of PCP pincer ligand (4) with [Pd(COD)Cl₂] affords complex [PdCl{C₆H₃-2-(CH₂PPh₂)-6-(CH(CH₃)PPh₂)}] (7) in good yield.     

Cadmium(II) N-acetylcysteine complex formation in aqueous solution

The complex formation between Cd(II) ions and N-acetylcysteine (H(2)NAC) in aqueous solution was investigated using Cd K- and L(3)-edge X-ray absorption and (113)Cd NMR spectroscopic techniques. Two series of 0.1 M Cd(II) solutions with the total N-acetylcysteine concentration c(H2NAC) varied between 0.2-2 M were studied at pH 7.5 and 11.0, respectively. At pH = 11 a novel mononuclear [Cd(NAC)(4)](6-) complex with the average Cd-S distance 2.53(2) ? and the chemical shift δ((113)Cd) = 677 ppm was found to dominate at a concentration of the free deprotonated ligand [NAC(2-)] > 0.1 M, consistent with our previous reports on cadmium tetrathiolate complex formation with cysteine and glutathione. At pH 7.5 much higher ligand excess ([HNAC(-)] > 0.6 M) is required to make this tetrathiolate complex the major species. The (113)Cd NMR spectrum of a solution containing c(Cd(II)) = 0.5 M and c(H2NAC) = 1.0 M measured at 288 K showed three broad signals at 421, 583 and 642 ppm, which can be attributed to CdS(3)O(3), CdS(3)O and CdS(4) coordination sites, respectively, in oligomeric Cd(II)-NAC species with single thiolate bridges between the cadmium ions.     

1,3-Dibromo-5,5-dimethylhydantoin as an efficient homogeneous catalyst for synthesis of benzoxazoles, benzimidazoles, and oxazolo[4,5-b]pyridines

Abstract  

A simple and highly efficient method for synthesis of benzoxazoles, benzimidazoles, and oxazolo[4,5-b]pyridines is described. Condensation of orthoesters with o-substituted anilines or 2-amino-3-hydroxypyridine was performed in the presence of catalytic amounts of commercially available, inexpensive, and moisture-stable 1,3-dibromo-5,5-dimethylhydantoin under solvent-free conditions. The corresponding heterocycles were obtained in good to excellent yields. The main advantages of the present procedure are mild reaction conditions, short reaction times, high yields of products, easy work-up, and absence of solvent.     

One-pot synthesis of functionalized thioureas by reaction of benzoyl isothiocyanates, secondary amines, and alkyl propiolates

An efficient one-pot synthesis of functionalized thioureas is described via three-component reaction of benzoyl isothiocyanates, secondary amines, and alkyl propiolates in the presence of triphenylphosphine (20 mol%). Correspondence: Issa Yavari, Chemistry Department, Tarbiat Modares University, PO Box 14115-175, Tehran, Iran