Swelling-assisted modification of poly(ethylene terephthalate) by methacrylic acid

When a poly(ethylene terephthalate), PET, film is heated in an aqueous solution of methacrylic acid in the presence of hydrogen peroxide as an initiator, it is found that the weight of the film is increased. The amount of methacrylic acid that may be added onto the film is dependent upon the concentration of the monomer, the initiator, and the temperature at which the reaction occurs. Pretreatment of the film with 1,1,2,2,tetrachloroethane causes swelling and the amount of add-on is increased as the swelling level increases. Methacrylic-acid-modified PET films hydrolyze at room temperature in aqueous sodium hydroxide; the rate of hydrolysis is dependent upon the amount of add-on and the concentration of the base. This procedure leads to a chemically induced blend of polymethacrylic acid and poly(ethylene terephthalate), and grafting of the monomer onto the polymer film does not occur. © 1995 John Wiley & Sons, Inc.     

用鲁米诺-KIO4-Fe(1, 10-phen)32+体系的化学发光法测定痕量铁

本文利用鲁米诺-KIO₄-Fe(1,10-phen)₃²⁺配合物体系产生化学发光反应,建立了测定痕量铁的新的化学发光分析方法.该法以1,10-phen为配位体,铁的检出限为1.6×10^-7g/L,工作曲线响应浓度范围在1×10^-5-1×10^-3g/L.在测定2×10^-4g/L铁的相对标准偏差为3.5%.用于检测工业沉淀BaSO₄中痕量铁获得满意结果.     

Li^＋／MgO上乙烷氧化脱氢制乙烯的研究（Ⅱ）：催化作用机理

借助ＸＲＤ、ＩＲ、ＴＧ等技术对Ｌｉ＾＋／ＭｇＯ进行了表征，结果表明，酸、碱中心的数目，强度、催化性与Ｌｉ＾＋的添加量相关 ，起酸碱作用的表面金属离子、表面低配位氧集团、Ｏ（Ｌ ｉ＾＋Ｏ＾－）是其反应的活性物种，反应机理可能由离子基、游离基协同完成。     

5-取代苯氨基-6-苯基-1,2,4-三嗪-3-酮的合成

苯甲铣基-N-取代茜基硫代甲酰胺与氨基脲缩合后,环化可何成4,6-二取代-5-硫酮-1,2,4-三嗪-3-酮.本文报道将其缩氨基脲中硫甲基化,然后在碱性条件下, 改变成环方式,合成九个5-取代苯氨基-6-苯基-1,1,4-三嗪1-3-酮.它们的结构经元素分析,红外,核磁,质谱等予以证实.探讨了两种不同成环原因.     

双核簇合物M~2S~2(μ-S)~2(dtp)~2(M=Mo,W)的电子结构及元件组装活性的abinitio研究

本文对双核簇合物M~2S~2(μ-S)~2(dtp)~2(M=Mo, W)及其簇芯碎片M~2S~4^2^+进行了相对论赝势从头算和Boys定域化分子轨道计算, 根据所计算的正则分子轨道(CMO)和定域分子轨道(LMO)以及Mulliken布居分析, 探讨了作为簇元元件的M~2S~4(dtp)~2的成键性质和电子结构, 利用广义微扰理论, 定性分析了M~2S~4^2^+型簇合物的元件组装活性位和活性区, 研究了它们发生[2+1]=3和[2+2]=4型元件组装的成簇机理。     

分子轨道图形理论中对称轴定理

本文试图以浅显明确的形式描述对称轴定理，使之能与对称面定理相媲美，并对对称轴定理作一定的扩展，给出分子轨道构造定理。     

Asymmetric allylic alkylation of acyclic allylic ethers with organolithium reagents

A highly efficient, regio- and enantioselective Cu(I) /phosphoramidite-catalyzed asymmetric allylic alkylation of allyl ethers with organolithium reagents is reported. The use of organolithium reagents is essential for this catalytic C?C bond formation due to their compatibility with different Lewis acids. The versatility of allylic ethers under the copper-catalyzed reaction conditions with organolithium reagents is demonstrated in the shortest synthesis of (S)-Arundic acid.     

Mechanism for the reaction of 2-naphthol with N-methyl-N-phenyl-hydrazine suggested by the density functional theory investigations

For the first time the computed mechanisms for the novel reaction of 2-naphthol with N-methyl-N-phenylhydrazine, leading to 1-amino-2-naphthol (Tang et al., J Am Chem Soc 2008, 130, 5840), have been investigated using the density functional theory. Four distinct possible pathways were evaluated: two amination mechanisms with the attack of NH(2) group respectively at the α-position C1 and β-position C3 atoms of 2-naphthol (pathways 1 and 2) as well as two rearrangement processes with displacement of the phenolic hydroxyl group followed by the benzidine-like rearrangement at the α-position C1 and β-position C3 atoms of 2-naphthol, respectively (pathways 3 and 4). Solvent effect has been tested based on the optimized geometries of the stationary points in solution at the B3LYP/PCM/6-31+G(d,p) level of theory with an averaged dielectric constant of binary solvent. Single-point energies of the optimized structures have been calculated using three hybrid density functionals, B3LYP, MPW3LYP, and B3PW91 with the 6-311++G(3df,2p) basis set. Our computed results clearly manifest that pathway 1 (α-amination) has the highest possibility to occur, with the Gibbs free energies being lower by 6 to 20 kcal/mol compared with the other three pathways, which leads to 1-amino-2-naphthol and N-methylaniline as products. It is in excellent agreement with the experimental observation.     

Batch fabrication of disposable screen printed SERS arrays

A novel facile method of fabricating disposable and highly reproducible surface-enhanced Raman spectroscopy (SERS) arrays using screen printing was explored. The screen printing ink containing silver nanoparticles was prepared and printed on supporting materials by a screen printing process to fabricate SERS arrays (6 × 10 printed spots) in large batches. The fabrication conditions, SERS performance and application of these arrays were systematically investigated, and a detection limit of 1.6 × 10(-13) M for rhodamine 6G could be achieved. Moreover, the screen printed SERS arrays exhibited high reproducibility and stability, the spot-to-spot SERS signals showed that the intensity variation was less than 10% and SERS performance could be maintained over 12 weeks. Portable high-throughput analysis of biological samples was accomplished using these disposable screen printed SERS arrays.     

Evaluating the identity and diiron core transformations of a (μ-oxo)diiron(III) complex supported by electron-rich tris(pyridyl-2-methyl)amine ligands

The composition of a (μ-oxo)diiron(III) complex coordinated by tris[(3,5-dimethyl-4-methoxy)pyridyl-2-methyl]amine (R(3)TPA) ligands was investigated. Characterization using a variety of spectroscopic methods and X-ray crystallography indicated that the reaction of iron(III) perchlorate, sodium hydroxide, and R(3)TPA affords [Fe(2)(μ-O)(μ-OH)(R(3)TPA)(2)](ClO(4))(3) (2) rather than the previously reported species [Fe(2)(μ-O)(OH)(H(2)O)(R(3)TPA)(2)](ClO(4))(3) (1). Facile conversion of the (μ-oxo)(μ-hydroxo)diiron(III) core of 2 to the (μ-oxo)(hydroxo)(aqua)diiron(III) core of 1 occurs in the presence of water and at low temperature. When 2 is exposed to wet acetonitrile at room temperature, the CH(3)CN adduct is hydrolyzed to CH(3)COO(-), which forms the compound [Fe(2)(μ-O)(μ-CH(3)COO)(R(3)TPA)(2)](ClO(4))(3) (10). The identity of 10 was confirmed by comparison of its spectroscopic properties with those of an independently prepared sample. To evaluate whether or not 1 and 2 are capable of generating the diiron(IV) species [Fe(2)(μ-O)(OH)(O)(R(3)TPA)(2)](3+) (4), which has previously been generated as a synthetic model for high-valent diiron protein oxygenated intermediates, studies were performed to investigate their reactivity with hydrogen peroxide. Because 2 reacts rapidly with hydrogen peroxide in CH(3)CN but not in CH(3)CN/H(2)O, conditions that favor conversion to 1, complex 1 is not a likely precursor to 4. Compound 4 also forms in the reaction of 2 with H(2)O(2) in solvents lacking a nitrile, suggesting that hydrolysis of CH(3)CN is not involved in the H(2)O(2) activation reaction. These findings shed light on the formation of several diiron complexes of electron-rich R(3)TPA ligands and elaborate on conditions required to generate synthetic models of diiron(IV) protein intermediates with this ligand framework.