一类不确定混沌系统的观测器同步

基于降维观测器的方法实现了一类具有外部扰动的混沌系统的同步. 无需知道系统外部扰动项的任何信息，就可对驱动系统设计基于降维观测器的响应系统，从而实现了混沌系统的同步. 数值仿真表明该方法是有效的. 关键词： 混沌同步 混沌系统 观测器     

光学薄膜测量时平顶光束激励的表面热透镜理论模型

推导了调制的平顶光束激励下基于Fresnel衍射积分的表面热透镜理论，通过数值模拟，比较了平顶光束和高斯光束激励下样品内部温度场、表面形变场和探测光衍射信号的径向分布，分析了影响表面热透镜信号的实验参数.结果表明，在最佳探测位置，平顶光束激励下的表面热透镜系统比相同情况下高斯光束激励下的灵敏度高，最高时约2倍，更有利于薄膜吸收测量. 关键词： 表面热透镜 光学薄膜 平顶光束     

脉冲磁场处理对碳纳米管掺杂MgB2线材临界电流密度的影响

对碳纳米管(CNT)掺杂MgB₂超导体磁场处理后的行为进行了研究. 结果表明，CNT掺杂MgB₂超导体经5T脉冲磁场处理后临界电流密度J_c(H)在低磁场下提高了2—3倍，高场下提高一个数量级以上，扫描电镜结果显示CNT沿着处理磁场方向规则排列并且成为MgB₂基体的形核中心和高效的磁通钉扎中心. 关键词： 2')" href="#">MgB₂ 碳纳米管 脉冲磁场处理     

外腔反馈对半导体激光器振荡特性的影响

通过有效反射系数的引入，根据激光谐振腔的自再现条件和对腔内光子密度、载流子密度方程的求解，分析了外腔反馈对半导体激光器的阈值增益、振荡频率和输出功率等振荡特性的影响，并通过实验进行了验证.外腔反馈后，半导体激光器的阈值电流从420mA降为370mA，输出功率的斜率效率获得了提高，理论计算的输出功率曲线与实验结果符合的很好. 关键词： 半导体激光器 外腔反馈 振荡特性     

Development of a Simulation Model for Solid Objects Suspended in a Fluctuating Fluid

We introduce a new scheme for the future application of Real-coded Lattice Gas (RLG) to the numerical simulation of suspended solid objects in a fluctuating fluid environment. The reproduction of Brownian motion for a single solid object is verified through the Gaussian distribution of its displacements. The effectiveness of the solid–solid interaction model is also confirmed in an N-body simulation.     

AFM study of gold nanowire array electrodeposited within anodic aluminum oxide template

Uniform gold nanowires were synthesized by electrodepositing the gold under a very low ac frequency in the pores of an anodic aluminum oxide (AAO) template. The surface of the Au/AAO composite is very even and appeared purplish red. Atomic force microscopy observation indicates that the template membranes we obtained have hexagonally close-packed nanochannels. The gold nanowire array is very orderly arranged after partially dissolving the aluminum oxide membrane. Gold nanowires were also characterized by transmission electron microscopy and the phase structure of the Au/AAO composite was proved by X-ray diffraction. Received: 19 April 2001 / Accepted: 28 April 2001 / Published online: 27 June 2001     

Fast response self-pumped phase conjugator based on a +c-face incident configuration in a pentagon-shaped BaTiO3 crystal

We propose a novel geometry for a self-pumped phase conjugator that uses a +c-face incident configuration in a photorefractive pentagon-shaped 0°-cut BaTiO₃ crystal for obtaining fast response in phase conjugation. A steady phase-conjugate output with a fast response time 0.4 s is obtained when the incident beam has a 4 W/cm² intensity. The influences of position and angle on the temporal phase-conjugate response are also investigated. The advantage of this phase conjugator using this novel configuration is improved resolution of a phase-distorted image with a value as high as 128 lp/mm.     

Fabrication of bamboo-shaped GaN nanorods

Bamboo-shaped GaN nanorods were formed through a simple sublimation method. They were characterized by means of X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selected-area electron diffraction (SAED). The TEM image showed that the nanorods were bamboo-like. XRD, HRTEM and SAED patterns indicated that the nanorods were single-crystal wurtzite GaN. Received: 8 January 2001 / Accepted: 28 April 2001 / Published online: 20 December 2001     

Formation of hydrogenated amorphous carbon films from polymer pyrolysis

Free-standing and supported hydrogenated amorphous carbon films (a:C–H) were prepared upon pyrolysis of the polymer formed by ethanolamine (EA) and citric acid (CA), under an ambient atmosphere at 300 °C. EA facilitates the formation of the macroscopic films, while CA is essential for obtaining the a:C–H microstructure, which comprises a mixture of sp² and sp³ carbon. Received: 29 May 2001 / Accepted: 17 August 2001 / Published online: 20 December 2001     

Production and Application of the Langmuir Aggregates of Eosine with Cetyl Trimethyl Ammonium Bromide

The procedure of microphase adsorption–spectral correction is applied to the interaction of eosine Y (EO) to the micelles of cetyl trimethyl ammonium bromide (CTAB). The Langmuir aggregation of EO on CTAB occurs owing to microelectrostatic attraction. The results have shown that at pH 3.8, monomeric and micellar aggregates have the structure EO₅·CTAB₂ and (EO₅·CTAB₂)₃₉. The adsorption constant of an aggregate is 7.01·10⁵, its molar absorption coefficient is = 8.8·10⁴ liters·mole^–1·cm^–1 at 550 nm. Application of the aggregation of EO on CTAB gives satisfactory results for quantitative determination of cation surfaceactive agents (surfactants).