Determination of iodide in drinking water by isotope dilution analysis

The most suitable way of determination iodine-deficiency is to measure iodine concentrations in water and urine. For this reason, a method that can determine iodide concentrations in drinking water and suitable for routine analysis, is developed. Water samples have been collected from four Aegean localities: Izmir, Salihli, Ödemis and Tire situated in the western Turkey. The method is based on substochiometric isotope dilution analysis. Iodile concentrations vary within 9.86–85.14 μg/l ranges in the analyzed samples. Mean value is 44.92±22.07 μg/l.     

Flow-injection catalytic spectrophotometric determination of nitrite using the redox reaction between naphthol green B and potassium bromate

A flow injection catalytic spectrophotometric method is proposed for the determination of nitrite based on its catalytic effect on the redox reaction between naphthol green B and potassium bromate in phosphoric acid medium. The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of naphthol green B at the maximum absorption wavelength of 722 nm. The detection limit is 0.5 ng cm(-3) in a sample volume of 90 mm(3). Up to 50 samples can be analyzed per hour with a relative precision of ca. 2%. The method is free from most interferences, especially from large amounts of nitrate. The procedure was successfully applied to the determination of trace nitrite in natural waters.     

Wannier-Stark effect on surface states

A recursive Green-function (RGF) technique is used to study the surface states of an electrified solid. The concatenating nature of the method leads to a continued-fraction form of the RGF, which can be expressed as a ratio of Bessel functions. The surface density of states (SDOS), derived from the RGF, reveals a quasi-Stark-ladder distribution of the energy levels at the surface atom. The dependence of the SDOS on the applied field and surface perturbation parameters is discussed.     

Silochroms as adsorbents and supports in liquid chromatography

The use of macroporous silica gels, silochroms, with homogeneous geometrical structure as adsorbents and supports for liquid stationary phases in liquid chromatography is described.

The selectivity of separation and retention volumes of silochroms depend strongly on the degree of hydroxylation of the surface and on the nature of the mobile phase. In optimizing the parameters, rapid and complete separation of strongly polar isomers and biological active substances and drugs is obtained.

The dependence of retention volumes and column efficiency on the amount of liquid phase, covered on silochrom, has been investigated.     

Syntheses based on 5-methylfurfural

Conclusions A series of derivatives of furan and tetrahydrofuran were synthesized on the basis of 5-methylfurfural: alkyl(5-methylfuryl)carbinols, alkyl(5-methyltetrahydrofuryl)carbinols, 2-methyl-5-alkenylfurans, 2-methyl-5-alkylfurans, and 2-methyl-5-alkyltetrahydrofurans.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 1829–1831, October 1966.     

Study of the silver selenide—silver telluride system

The system Ag₂TeAg₂Se was investigated by DTA, X-ray diffraction and microstructural analysis within the composition interval from 0 to 100% Ag₂Te. Samples obtained after heating at 500°C for 720 h were studied.The high-temperature polymorphs form a continuous solid solution with a minimum at 35% Ag₂ Te and 835°C. At low temperatures solid-phase transformations take place. The break-down of the solid solution proceeds eutectoidally at about 110°C on the Ag₂Te side peritectoidally at about 150°C on the Ag₂Se side. The system Ag₂TeAg₂Se is rather complex.     

ANION AND SOLVENT EFFECTS ON THE RATE OF REDUCTION OF TRIPLET EXCITED THIAZINE DYES BY FERROUS IONS

Abstract— The lifetimes of the triplet excited states of thionine and methylene blue were measured in aqueous and 50 v/v% aqueous acetonitrile solutions acidified with 0.01 N sulfuric or trifluoromethyl-sulfonic acid. The rate constants for reaction of the triplet excited dyes with ferrous ions were measured in the same solutions. The triplet lifetimes in the absence of added quenchers were insensitive to a change in acid from trifluoromethylsulfonic to sulfuric or to a change in solvent from water to 50v/v% aqueous acetonitrile (τ for triplet thionine ˜7.5 μs, τ for triplet methylene blue ˜4.5 μs). In contrast, the rate constant for reaction of the triplet dyes with ferrous ions increased by nearly a factor of 10 with a change in acid from trifluoromethylsulfonic to sulfuric. In solutions containing sulfate ions this reaction rate constant increased with increasing sulfate concentration and with a change in solvent from water to 50 v/v% aqueous acetonitrile. The results are discussed in terms of the possibility of association of the positively charged reactive ions with sulfate anions. Quenching of the triplet excited dyes by ferric ions or by ground state dye molecules was shown to be negligible at the concentration used for the ferrous ion quenching study.     

Algorithms for high-level data processing in gas chromatography

Computer processing of gas chromatographic data is discussed, with special emphasis on the numerical operations needed. The CHADIC program is described. This program enables optimal separation conditions to be determined and isothermal gas chromatograms to be processed for qualitative and quantitative analysis.     

Claisen rearrangement taking place in the mass spectrometer

Conclusions The Claisen rearrangement of bucharaine and of the aldehyde bucharainal takes place under the conditions of mass spectrometry. At low temperatures inversion predominates and at high temperatures the anomalous rearrangement.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 577–583, September–October, 1970.     

Volumetric determination of Pt(IV) in the presence of Ir,Pd, and Rh with ferrous ammonium sulfate in alkaline mannitol medium

A potentiometric reductimetric method for the determination of platinum (Pt(IV)Pt(II)) with a standard Fe(II) solution in an alkaline medium of mannitol is described. The method, the error of which does not exceed 2%, can be used in the presence of palladium, iridium, and rhodium.