金属羰基化合物（CpFe（CO）2）2与金属氧化物表面作用的傅里叶变…

用漫反射红外光谱和光声红外光谱研究了金属羰基化合物（ＣｐＦｅ（ＣＯ）２）２Ｃｐ＝η＾５－Ｃ５Ｈ５与酸性，中性和碱性Ａｌ２Ｏ３及ＴｉＯ２的相互作用，结果表明，在Ａｌ２Ｏ３表面生成的洗生物种类及浓度与Ａｌ２Ｏ３的酸碱度明显相关，在酸性Ａｌ２Ｏ３表面，主要存在衍生物（ＣｐＦｅ（ＣＯ）２Ｆｅ－Ｈ－Ｆｅ（ＣＯ２Ｃｐ）＾＋及少量的ＣｐＦｅ（ＣＯ）２（－Ｏ－）；在中性Ａｌ２Ｏ３表面存在的ＣｐＦｅ（ＣＯ）２（－Ｏ     

Zeeman transitions in deuterium atoms induced by ultra-relativistic electrons

We present data showing hyperfine transitions in an atomic deuterium beam induced by the (476 MHz) radio-frequency field of a 704 MeV electron beam in a storage ring. A polarized deuterium beam, produced in an atomic beam source, was crossed with a stored electron beam and analyzed with a Breit--Rabi polarimeter. Electron-beam induced transitions were singled out by injecting different combinations of hyperfine states. Transition probabilities as high as 70% were measured at large currents (~ 100 mA). All possible deuterium transitions for a radio-frequency of 476 MHz were observed. In addition, a 1--6 transition resulting from the first harmonic (952 MHz) was observed. The effects of these transitions are of general importance for the polarized internal target technique applied in nuclear and particle physics experiments. The data are reasonably described by numerical estimates. The observed mechanism can be exploited to create nuclear polarized atoms when injecting electron polarized atoms with no net nuclear polarization into a storage cell. However, when nuclear polarized atoms are injected, care should be taken to avoid this mechanism, since it would result in depolarization of the atoms. The studies enabled us to choose the magnetic guide field during our spin-dependent electron--deuteron scattering experiments, such that electron-beam induced depolarizing effects were avoided. This revised version was published online in July 2006 with corrections to the Cover Date.     

Direct laser ablation of sub-100 nm line structures into polyimide

Periodic line structures with a period of 167 nm and linewidths varying from 30 to 100 nm have been produced in polyimide by direct ablation with a KrF laser using an interferometric technique. The characteristics of this interferometer as it applies to the ablation of these line structures, including linewidth and alignment sensitivity, are analyzed. The ability to control the linewidth by varying the average incident fluence is described theoretically and demonstrated experimentally. This externally generated period of 167 nm also prevents the spontaneous growth of laser induced periodic surface structures (LIPSS).     

A Practical Solution to a Cargo Loading Problem at Bethlehem Steel

The optimum assignment of structural steel shapes to rail cars is an important logistical problem in the steel industry. In this paper, we discuss an application at Bethlehem Steel that not only involves weight and dimensional constraints, but also customer unloading constraints. The formulation is a generalized bin packing problem which is solved by modifying and extending the first fit decreasing algorithm. The solution algorithm, SOLID (for Structural Optimal Loading IDentification), has been used extensively for one of Bethlehem's high tonnage customers providing very good practical (implementable) results that achieve the desired goals. Bethlehem has enhanced this approach for use with other customers.     

Laser pulse heating of steel surface and flexural wave analysis

Laser gas-assisted material processing finds wide application in industry. The modelling of heating, elastic response of the substrate material, and the wave analysis gives insight into the laser workpiece interaction. In the present study, laser gas-assisted heating of steel is considered. The normal component of the thermal stress is taken as the source of load for the flexural wave generation in the material. The flexural wave generated is simulated and the wave characteristics are analyzed at four locations at the workpiece surface. The numerical scheme employing a control volume approach is introduced when solving the governing equations of flow and heat transfer while finite element and spectran element methods are used when solving the stress and wave equations. It is found that the normal component of the stress is tensile. The dispersion effect of the workpiece material, interference of the reflected beam, and partial overlapping of second mode of the travelling wave enable to identify a unique pattern in the travelling wave in the substrate.     

Meromorphic functions connected with polylogarithms

M. V. Lomonosov Moscow State University. Translated from Funktsional'nyi Analiz i Ego Prilozheniya, Vol. 25, No. 1, pp. 88–91, January–March, 1991.     

Thermoelastic-plastic stress state of shells of revolution reinforced by annular ribs

Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Prikladnaya Mekhanika, Vol. 27, No. 1, pp. 50–55, January, 1991.     

Complexation thermodynamics of free and graft oligomers with complementary polymers

The dilute solution complexation equilibrium between linear macromolecules and smaller complementary oligomers is considered when: (1) the oligomers are free in solution; and (2) the oligomers are covalently attached at one end to the polymer. A general statistical mechanical framework is developed and is illustrated using a simple random walk model for polymer conformation. The statistical mechanical partition functions are formulated using a generating function technique, allowing thermodynamic averages in the complexed state to be calculated. Loops, trains, and tails of all possible length are allowed in the conformation of a complexed oligomer. Simulation results for the free oligomer case are compared with those obtained for oligomers covalently attached to the polymeric molecular. The model provides a theoretical explanation for the experimentally observed enhancement of complexation of oligomers grafted to the complementary polymers.     

All-fibre optical system for exciting and detecting the vibration of silicon microresonator sensors

An all-fibre optical system for optical interrogation and detection of the vibrations of a silicon microresonator is reported. Metal-coated silicon microresonators are excited by intensity modulated laser light delivered through an optical fibre, while the vibration of the resonators is detected by an optical fibre interferometer. Measurements have shown that an average optical power of 10 μW is sufficient to maintain the flexural vibration of the resonator. When the resonator is used as a pressure sensor, its resonant frequency changes from 62 kHz to 130 kHz as the pressure varies from -0°6 bar to 1 bar (gauge). A silicon resonator with 700 nm aluminium coating functions as a temperature sensor, showing a frequency shift from 262 kHz to 251 kHz when the temperature changes from 25 °C to 80 °C.