Determination of trace impurities in high-purity iron using salting-out of polyoxyethylene-type surfactants

To an iron sample solution was added polyoxyethylene-4-isononylphenoxy ether (PONPE, nonionic surfactant, average number of ethylene oxides 7.5) and the surfactant was aggregated by the addition of lithium chloride. The iron(III) matrix was collected into the condensed surfactant phase in >99.9% yields, leaving trace metals [e.g., Ti(IV), Cr(III), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pb(II), and Bi(III)] in the aqueous phase. After removing the surfactant phase by centrifugation, the remaining trace metals were concentrated onto an iminodiacetic acid-type chelating resin. The trace metals were desorbed with dilute nitric acid for the determination by inductively coupled plasma-mass spectrometry or graphite-furnace atomic absorption spectrometry. The proposed separation method allowed the analysis of high-purity iron metals for trace impurities at low μg g⁻¹ to ng g⁻¹ levels.     

Chemiluminescence of 6-aryl-2-methylimidazo[1,2-a]pyrazin-3(7H)-ones in DMSO/TMG and in diglyme/acetate buffer: support for the chemiexcitation process to generate the singlet-excited state of neutral oxyluciferin in a high quantum yield in the Cypridina (Vargula) bioluminescence mechanism

The chemiluminescence of 6-aryl-2-methylimidazo[1,2-a]pyrazin-3(7H)-ones (Cypridina luciferin analogues) in DMSO/1,1,3,3-tetramethylguanidine and in diglyme/acetate buffer was investigated. The results indicate that the reaction mechanism that produces a high chemiluminescence quantum yield involves a chemiexcitation process from a neutral dioxetanone intermediate possessing an electron-donating aryl group (σ_Ar <−0.6) to the singlet-excited state of neutral acetamidopyrazine. This result may be applied to the reaction mechanism for Cypridina (Vargula) bioluminescence.     

A synthesis of bicyclo[n.1.0]alkanes having tert-butyl carboxylate or acetamide moiety via the intramolecular 1,3-CH insertion of magnesium carbenoids

Treatment of 1-chlorovinyl p-tolyl sulfoxides, derived from various cyclic ketones and chloromethyl p-tolyl sulfoxide, with lithium enolate of carboxylic acid tert-butyl esters or N,N-dimethylacetamide gave adducts in high yields. The adducts were treated with ether solution of isopropylmagnesium chloride in dry toluene to give bicyclo[n.1.0]alkane derivatives having tert-butyl carboxylate or acetamide moiety on the bridgehead carbon in high to quantitative yields via magnesium carbenoid 1,3-CH insertion reaction. The 1,3-CH insertion reaction proved to be regioselective and stereospecific. The reaction mechanism and origin of the selectivity and specificity are discussed.     

Unveiling Latent Photoreactivity of Imines

Unlike carbonyl compounds, it has long been common understanding that excited imines show virtually no photoreactivity, and hence their properties and potential utility in chemical science remain largely unexplored. Now, a strategy is presented for eliciting latent photoreactivity of imines based on the introduction of a donor–acceptor (D‐A) structure to extend the lifetime of their photoexcited states. A series of spectroscopic analyses and density functional theory calculations reveal unique photophysical properties of the D‐A‐type imines. Furthermore, the reactivity of the D‐A‐type imines is demonstrated by using them as a photoredox catalyst for atom‐transfer radical addition. These findings illuminate a previously neglected chemical space in the field of photochemistry, which will be exploited by taking advantage of the inherent structural modularity of imines.     

Aggregation behavior of amphiphilic random copolymer of 2‐(acrylamido)‐2‐methylpropanesulfonic acid and tris(trimethylsiloxy)silylpropylmethacrylate in aqueous solution

Aggregation behavior including dilute solution property and surface‐activity of the amphiphilic random copolymer composed of 2‐(acrylamido)‐2‐methylpropanesulfonic acid and tris(trimethylsiloxy)silylpropylmethacrylate (AMPS/TRIS copolymer) in aqueous solution were studied by static light scattering (SLS), dynamic light scattering (DLS), surface tension measurement, and transmission electron microscopy (TEM). The surface tension measurement made it clear that AMPS/TRIS copolymer exhibited weaker surface‐activity than a typical low‐molecular weight surfactant sodium dodecyl sulfate in water, that is, there were no plateau of surface tension γ versus concentration and no critical micelle concentration (CMC) in the whole concentration studied. SLS and DLS analyses, and TEM revealed that AMPS/TRIS copolymer self‐associated into imperfect core‐shell micelles having hydrophobic TRIS core surrounded by hydrophilic AMPS shell in water. AMPS shell was considered as a hard shell due to the stiffness of AMPS chain in water. TRIS chain could not densely aggregate in water due to the large steric hindrance between bulky trimethylsiloxy groups despite its hydrophobic nature, thereby providing TRIS core with less‐dense structure. The balance between the spreading force of stiff AMPS chain and the cohesion force of bulky TRIS chain provides the driving force for forming the unique micelle having less‐dense TRIS core and hard AMPS shell. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Dynamic Open Coordination Cage from Nonsymmetrical Imidazole–Pyridine Ditopic Ligands for Turn‐On/Off Anion Binding

This work demonstrates a new nonconventional ligand design, imidazole/pyridine‐based nonsymmetrical ditopic ligands ( 1 and 1 ^S ), to construct a dynamic open coordination cage from nonsymmetrical building blocks. Upon complex formation with Pd²⁺ at a 1:4 molar ratio, 1 and 1 ^S initially form mononuclear PdL₄ complexes (Pd²⁺( 1 )₄ and Pd²⁺( 1 ^S )₄) without formation of a cage. The PdL₄ complexes undergo a stoichiometrically controlled structural transition to Pd₂L₄ open cages ((Pd²⁺)₂( 1 )₄ and (Pd²⁺)₂( 1 ^S )₄) capable of anion binding, leading to turn‐on anion binding. The structural transitions between the Pd₂L₄ open cage and the PdL₄ complex are reversible. Thus, stoichiometric addition (2 equiv) of free 1 ^S to the (Pd²⁺)₂( 1 ^S )₄ open cage holding a guest anion ((Pd²⁺)₂( 1 ^S )₄?G^?) enables the structural transition to the Pd²⁺( 1 ^S )₄ complex, which does not have a cage and thus causes the release of the guest anion (Pd²⁺( 1 ^S )₄+G^?).     

Copper‐Catalyzed Enantioselective Allyl–Allyl Coupling between Allylic Boronates and Phosphates with a Phenol/N‐Heterocyclic Carbene Chiral Ligand

Copper‐catalyzed enantioselective allyl–allyl coupling between allylboronates and either Z‐acyclic or cyclic allylic phosphates using a new chiral N‐heterocyclic carbene ligand, bearing a phenolic hydroxy, is reported. This reaction occurs with exceptional S_N2′‐type regioselectivities and high enantioselectivities to deliver chiral 1,5‐diene derivatives with a tertiary stereogenic center at the allylic/homoallylic position.     

Capillary high-performance liquid chromatography/electrospray ion trap time-of-flight mass spectrometry using a novel nanoflow gradient generator

A type of high-performance liquid chromatography (HPLC) based on a novel nanoflow gradient generator (Asymptotic-Trace-10-Port-Valve (AT10PV) nanoGR generator) was developed and coupled with an electrospray ion trap time-of-flight mass spectrometer (ESI-IT-TOF MS). Stability of the nanoflow GR HPLC system was tested at flow rates of 20 and 50 nL/min by using a nanoflow meter. Average flow rates in a 2-h run were 51.2 nL/min with RSD 0.7% and 21.0 nL/min with RSD 1.8%. Repeatability of analysis of the nanoHPLC/ESI-IT-TOF MS system was also tested by injecting 1.0 microL of trypsin digested bovine serum albumin (BSA) (100 fmol) into a monolithic silica-ODS column (30 microm i.d., 150 mm in length) through a packed silica-ODS trapping column (particle size 5 microm, 150 microm i.d., 10 mm in length). At a flow rate of 50 nL/min, the result demonstrated a reasonably good repeatability of peak retention times (RSD: 0.32-1.1%) and base-ion peak areas (RSD: 4.4-6.6%).     

Granulation of Nickel–Aluminum–Zirconium Complex Hydroxide Using Colloidal Silica for Adsorption of Chromium(VI) Ions from the Liquid Phase

We combined a nickel–aluminum–zirconium complex hydroxide (NAZ) with colloidal silica as a binder to prepare a granulated agent for adsorbing heavy metals from aqueous media. Three samples with different particle diameters were prepared to evaluate the effects on the properties: small (NAZ-S), medium (NAZ-M), and large (NAZ-L). We confirmed the granulation of the prepared samples at a binder content of 25%. NAZ-S had the largest specific surface area and number of hydroxyl groups, followed by NAZ-M and then NAZ-L. Regarding the adsorption capacity, NAZ-S adsorbed the most chromium(VI) ions followed by NAZ-M and then NAZ-L. The binding energy of Cr(2p) at 575–577 eV was detected after adsorption, and the effects of the temperature, contact time, and pH on the adsorption of chromium(VI) ions were evaluated. We identified the following adsorption mechanism: ion exchange with sulfate ions in the interlayer region of the NAZ samples. Finally, the chromium(VI) ions adsorbed by the NAZ samples were easily desorbed using a desorption solution. The results showed that NAZ offers great potential for the removal of chromium(VI) ions from aqueous solutions.