Magnetic properties of electrochemically prepared crystalline films of Prussian blue-based molecular magnets K j CrII k [CrIII(CN)6] l · mH2O

Crystalline films (thickness ～1 μm) of Prussian blue-based molecular magnets, synthesized using electrochemical method at two different reduction potentials ?0.5 and ?0.9 V, result into K_0.1Cr^II _1.45[Cr^III(CN)₆]?·?mH₂O (film 1) and K_0.8Cr^II _1.1[Cr^III(CN)₆]?·?mH₂O (film 2), respectively. The structural and magnetic properties of such films are investigated using atomic force microscopy (AFM), X-ray diffraction (XRD), infrared (IR) spectroscopy, and dc magnetization measurements. The film morphology, examined using AFM, shows uniformly distributed triangular crystallites over the substrate surface. The presence of Cr^III–C≡N–Cr^II sequence, in the range of 1,900 to 2,300 cm^?1 in IR spectra, confirms formation of Prussian blue analogues. The XRD results reveal information about the crystalline nature of the films and the relative intensities of the Bragg peaks change with the K⁺ ions. The exchange interaction between Cr ions through C≡N ligand confirms that the electron transfer from C≡N molecule to Cr ions is ferrimagnetic in nature. The high Curie temperatures (T _C) are found to be ～195 and ～215 K for film 1 and film 2, respectively. The higher value of T _C is attributed to the inclusion of more K⁺ ions for film 2, resulting decreases in the Cr^III(C≡N)₆ vacancies and increases in the number of nearest neighbors of Cr^II ions. The branching in the zero field-cooled and field-cooled magnetization data below Curie temperature is explained in terms of kinetic behavior of magnetic domains with different cooling conditions and the presence of water molecule vacancies in the lattice.     

Voltammetric methods of reboxetine analysis and the mechanism of its electrode reactions

Reboxetine (RBX) electrochemical redox behavior at hanging mercury drop (HMDE) and glassy carbon electrodes (GCE) was studied in various pH Britton-Robinson universal buffers using cyclic voltammetry and square-wave voltammetry. RBX was reduced at the HMDE and oxidized at the GCE with reversible adsorption controlled and irreversible diffusion controlled processes respectively. The anodic peak is due to the amine and the cathodic peak may correspond to oxygen protonation. An oxidation reaction mechanism is proposed. The linear relation between peak currents and RBX concentration allowed simple, sensitive, precise and inexpensive voltammetric procedures to be developed. The limit of detection was 0.04 µM RBX. The procedures were successfully applied to human urine and RBX tablet assay. Therapeutic RBX concentrations in human serum were not detected due to strong drug-protein binding. Using bovine serum albumin, the methods were used to investigate the effect of serum protein binding on RBX determination.      

Voltammetric behavior of rutin at a boron-doped diamond electrode. Its electroanalytical determination in a pharmaceutical formulation

This paper examined for the first time, the possibilities of the usage of a boron-doped diamond electrode for the redox behavior of rutin using cyclic and adsorptive stripping voltammetry. The cyclic voltammograms showed a pair of redox peaks at lower potentials followed by an irreversible oxidation peak at higher positive potential. Using square-wave adsorptive stripping voltammetry, the compound yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 4.0 at +0.48 V (vs. Ag/AgCl) (after 60 s accumulations at a fixed potential of 0.2 V). The calibration curve was linear in the concentration range from 0.01 µg mL^?1 to 0.1 µg mL^?1 (1.64×10^?8 M ? 1.64×10^?7 M). A detection limit of 0.0017 µg mL^?1 (2.78×10^?9 M) was observed without any chemical modifications and electrochemical surface pretreatments. As an example, the practical applicability of boron-doped diamond electrode was tested with the measurement of rutin in dietary supplement products.      

Optimization of chemical and instrumental parameters in hydride generation laser-induced breakdown spectrometry for the determination of arsenic,antimony, lead and germanium in aqueous samples

A laser induced breakdown spectrometry hyphenated with on-line continuous flow hydride generation sample introduction system, HG-LIBS, has been used for the determination of arsenic, antimony, lead and germanium in aqueous environments. Optimum chemical and instrumental parameters governing chemical hydride generation, laser plasma formation and detection were investigated for each element under argon and nitrogen atmosphere. Arsenic, antimony and germanium have presented strong enhancement in signal strength under argon atmosphere while lead has shown no sensitivity to ambient gas type. Detection limits of 1.1 mg L⁻¹, 1.0 mg L⁻¹, 1.3 mg L⁻¹ and 0.2 mg L⁻¹ were obtained for As, Sb, Pb and Ge, respectively. Up to 77 times enhancement in detection limit of Pb were obtained, compared to the result obtained from the direct analysis of liquids by LIBS. Applicability of the technique to real water samples was tested through spiking experiments and recoveries higher than 80% were obtained. Results demonstrate that, HG-LIBS approach is suitable for quantitative analysis of toxic elements and sufficiently fast for real time continuous monitoring in aqueous environments.     

Investigation of Some Functionalization Reactions of 4‐Benzoyl‐5‐phenyl‐1‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carbonyl Chloride and Their Antimicrobial Activity

The 1H‐pyrazole‐3‐carboxylic acid 1 was converted via reactions of its acid chloride 3 with various asymmetrical disubstituted urea and alcohol derivatives into the corresponding novel 4‐benzoyl‐N‐(N′,N′‐dialkylcarbamyl)‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxamide 4a , b and alkyl 4‐benzoyl‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylate 7a‐c , respectively, in good yields (57%‐78%). Friedel‐Crafts reactions of 3 with aromatic compouns for 15 min.‐2 h led to the formation of the 4‐3‐diaroyl‐1‐(4‐hydroxyphenyl)‐5‐phenyl‐1H‐pyrazoles 9a‐c , 4‐benzoyl‐1‐(4‐methoxyphenyl)‐3‐aroyl‐5‐phenyl‐1H‐pyrazoles 10a , b and than from the acylation reactions of 9a‐c were obtained the 3,4‐diaroyl‐1‐(4‐acyloxyphenyl)‐5‐phenyl‐1H‐pyrazoles 13a‐d . The structures of all new synthesized compounds were established by NMR experiments such as ¹H, and ¹³C, as well as 2D COSY and IR spectroscopic data, and elemental analyses. All the compounds were evaluated for their antimicrobial activities (agar diffusion method) against eight bacteria and two yeasts.     

The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

Synthesis of 2,3‐Dihydro‐4H‐furo[3,2‐c] chromen‐4‐ones and 2,3‐Dihydronaphtho[2,3‐b]furan‐4,9‐diones by the Radical Cyclizations of Hydroxyenones with Electron-Rich Alkenes using Manganese(III) Acetate

We have obtained dihydrofurans 3a–j in the radical cyclization of 4‐hydroxycoumarin 1a and 2‐hydroxy‐1,4‐naphtoquinone 1b with electron rich alkenes 2a–i by manganese(III) acetate. Methods A and B, which have different molar ratios were studied comparatively in these reactions, and we observed that method B (molar ratio 2:1:3) gave the best results. Treatment of 4‐hydroxycoumarin 1a and electron rich alkenes 2a–e gave 2,3‐dihydro‐4H‐furo[3,2‐c]chromen‐4‐ones 3a–e in 36–86% yields by the method B. Under the same conditions, the reactions of 2‐hydroxy‐1,4‐naphtaquinone 1b with conjugated alkenes 2b and 2f–i afforded 2,3‐dihydronaphtho[2,3‐b]furan‐4,9‐diones 3f–j in an excellent yields.     

Synthesis of N,N‐Dimethylamines via Barbier–Grignard‐Type Electrophilic Amination

Aryl Grignard reagents react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine in THF under Barbier conditions at room temperature and give N,N‐dimethylanilines with high yields in a 2‐h reaction. The amination yield of in situ Grignard reagents were not lower than those of preformed aryl Grignard reagents. In situ cycloalkyl‐, allyl‐, and benzylmagnesium bromides did not react with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine, except that amination of in situ n‐hexylmagnesium bromide resulted in a medium yield. Grignard–Barbier‐type amination of aryl bromides with N,N‐dimethyl O‐(mesitylenesulfonyl)hydroxylamine provides a new alternative route for the synthesis of N,N‐dimethylanilines.     

Synthesis and Characterization of New Chalcone Derivatives from cis-Bicyclo[3.2.0]hept-2-en-6-one

A series of chalcone derivatives (3a–k) were prepared via the reaction of cis-bicyclo[3.2.0]hept-2-en-6-one (1) with the respective arylaldehydes (2a–k) and were then characterized by Fourier transform infrared (FT-IR), ¹H NMR, ¹³C NMR, and elemental analyses.