Elastomeric nanoparticle composites covalently bound to Al2O3/GaAs surfaces

This article reports the modification of Al2O3/GaAs surfaces with multifunctional soft materials. Siloxane elastomers were covalently bound to dopamine-modified Al2O3/GaAs semiconductor surfaces using MPt (M = Fe, Ni) nanoparticles. The sizes of the monodisperse FePt and NiPt nanoparticles were less than 5 nm. The surfaces of the nanoparticles as well as the Al2O3/GaAs substrates were modified with allyl-functionalized dopamine that utilized a dihydroxy group as a strong ligand. The immobilization of the elastomers was performed via a hydrosilation reaction of the allyl-functionalized dopamines with the siloxane backbones. X-ray photoelectron spectroscopy (XPS) experiments confirmed the covalent bonding of the siloxane elastomers to the oxide layer on the semiconductor surface. Fourier transform-infrared reflection absorption spectroscopy (FT-IRRAS) measurements revealed that the allyl functional groups are bonded to the siloxane backbones. The FT-IRRAS data also showed that the density of the allyl groups on the surface was lower than that of the siloxane backbones. The mechanical properties of the surface-bound nanocomposites were tested using nanoindentation experiments. The nanoindentation data showed that the soft matrix composed of the elastomeric coating on the surfaces behaves differently from the inner, hard Al2O3/GaAs substrate.     

Exercise type and muscle fiber specific induction of caveolin-1 expression for insulin sensitivity of skeletal muscle

It is well known that exercise can have beneficial effects on insulin resistance by activation of glucose transporter. Following up our previous report that caveolin-1 plays an important role in glucose uptake in L6 skeletal muscle cells, we examined whether exercise alters the expression of caveolin-1, and whether exercise-caused changes are muscle fiber and exercise type specific. Fifty week-old Sprague Dawley (SD) rats were trained to climb a ladder and treadmill for 8 weeks and their soleus muscles (SOL) and extensor digitorum longus muscles (EDL) were removed after the last bout of exercise and compared with those from non-exercised animals. We found that the expression of insulin related proteins and caveolins did not change in SOL muscles after exercise. However, in EDL muscles, the expression of insulin receptor beta (IR beta) and glucose transporter-4 (GLUT-4) as well as phosphorylation of AKT and AMPK increased with resistance exercise but not with aerobic exercise. Also, caveolin-1 and caveolin-3 increased along with insulin related proteins only in EDL muscles by resistance exercise. These results suggest that upregulation of caveolin-1 in the skeletal muscle is fiber specific and exercise type specific, implicating the requirement of the specific mode of exercise to improve insulin sensitivity.     

Single-pulse coherent diffraction imaging using soft x-ray laser

We report a coherent diffraction imaging (CDI) using a single 8 ps soft x-ray laser pulse at a wavelength of 13.9 nm. The soft x-ray pulse was generated by a laboratory-scale intense pumping laser providing coherent x-ray pulses up to the level of 10(11) photons/pulse. A spatial resolution below 194 nm was achieved with a single pulse, and it was shown that a resolution below 55 nm is feasible with improved detector capability. The single-pulse CDI might provide a way to investigate dynamics of nanoscale molecules or particles.     

Composite‐Assisted Phase‐Matching: Efficient Wavelength Conversion in Nonlinear Optical Composite Materials Containing Metal Nanoparticles

A novel phase‐matching scheme which is based on the dispersion compensation in the nonlinear optical composite materials containing metal nanoparticles is proposed. Anomalous dispersion originating from the plasmon resonance in metal nanoparticles compensates the dispersion of the host nonlinear material, leading to the perfect phase‐matching and high efficiency of nonlinear optical wavelength conversion. The effectiveness of this approach is theoretically demonstrated, taking third‐order nonlinear processes such as the direct third‐harmonic generation and four‐wave mixing in ZnO composites containing silica‐core–silver‐shell nanoparticles as examples. The results show that with the proposed phase‐matching scheme, unprecedentedly high conversion efficiency can be obtained compared with preceding results in third‐order nonlinear optical solid‐state materials.     

Improved prewhitening method for linear frequency modulation reverberation using dechirping transformation

This letter presents an autoregressive (AR) prewhitener for linear frequency modulation (LFM) reverberation to enhance the target signal. The proposed method uses a dechirping transformation to inversely compensate the frequency chirp rate of the LFM and give the LFM reverberation a stationary frequency property in each data block. The left or right beam signal adjacent to the current beam is then used as the reference signal, and the frequency response of each data block modeled using the AR coefficients. Finally, these coefficients are used to implement the inverse filter and efficiently prewhiten the LFM reverberation of the current beam.     

A biogentic-type synthesis of dendrolasin

Dendrolasin¹ was synthesized from farnesol via biogenetic-type intermediates.     

Lithiated cyclopropanone ketals

The ketene acetal I reacted with dibromocarbene yielding the dibromocyclopropanone ketal II, which was reduced to the monobromide III by treatment with tri-n-butyltin hydride. Reaction of III with n-butyllithium at ?78°C yielded the lithiated cyclopropanone ketal IV, which yielded adducts with acetone, cyclohexanone, cyclohexenone, 3,3,3-trimethoxybutan-2-one, 2-butanone, and 3-pentanone.     

Targeted and sustained delivery of aclarubicin to lymphatics by lactic acid-oligomer microsphere in rat

We examined targeted delivery of an anticancer drug, aclarubicin (ACR), to the lymphatic system in rats by encapsulation of the drug in microsphere (MS) prepared from nontoxic and biodegradable L-lactic acid-oligomer with an average molecular weight (Mw) of 3600. ACR was released at an almost constant rate from two kinds of ACR-MSs having different size (1-5 microns and less than 1 micron) over 20 d in phosphate-buffered saline at 37 degrees C. The intraperitoneal administration of both ACR-MSs (dose of ACR; 5 mg/kg) to rats sustained an almost constant ACR level (300-400 and 400-600 ng/ml) in the lymph of the thoracic duct during over 10 d, and the ACR level in the blood was extremely low, although intraperitoneal injection of ACR alone gave lower level of ACR in the lymph than in the blood level within 12 h.     

Production of lactic acid from food wastes

Conversion of food wastes into lactic acid by simultaneous saccharification and fermentation (SSF) was investigated. The process involves saccharification of the starch component in food wastes by a commercial amylolytic enzyme preparation (a mixture of amyloglucosidase, α-amylase, and protease) and fermentation by Lactobacillus delbrueckii. The highest observed overall yield of lactic acid in the SSF was 91% of theoretical. Lactic acid concentration as high as 80 g/L was attainable in 48 h of the SSF. The optimum operating conditions for the maximum productivity were found to be 42°C and pH 6.0. Without supplementation of nitrogen-containing nutrients, the lactic acid yield in the SSF decreased to 60%: 27 g/L of lactic acid from 60 g/L of food waste. The overall performance of the SSF, however, was not significantly affected by the elimination of mineral supplements.     

Preparation of oriented β‐form poly(L‐lactic acid) by solid‐state extrusion

Melt‐crystallized, low molecular weight poly(L ‐lactic acid) (PLLA) consisting of α crystals was uniaxially drawn by solid‐state extrusion at an extrusion temperature (T_ext) of 130–170 °C. A series of extrusion‐drawn samples were prepared at an optimum T_ext value of 170 °C, slightly below the melting temperature (T_m) of α crystals (～180 °C). The drawn products were characterized by deformation flow profiles, differential scanning calorimetry (DSC) melting thermograms, wide‐angle X‐ray scattering (WAXD), and small‐angle X‐ray scattering as a function of the extrusion draw ratio (EDR). The deformation mode in the solid‐state extrusion of semicrystalline PLLA was more variable and complex than that in the extensional deformation expected in tensile drawing, which generally gave a mixture of α and β crystals. The deformation profile was extensional at a low EDR and transformed to a parabolic shear pattern at a higher EDR. At a given EDR, the central portion of an extrudate showed extensional deformation and the shear component became progressively more significant, moving from the center to the surface region. The WAXD intensities of the (0010)_α and (003)_β reflections on the meridian as well as the DSC melting thermograms showed that the crystal transformation from the initial α form to the oriented β form proceeded rapidly with increasing EDR at an EDR greater than 4. Furthermore, WAXD showed that the crystal transformation proceeded slightly more rapidly at the sheath region than at the core region. This fact, combined with the deformation profiles (shear at the sheath and extensional at the core), indicated that the crystal transformation was promoted by shear deformation under a high pressure rather than by extensional deformation. Thus, a highly oriented rod consisting of only β crystals was obtained by solid‐state extrusion of melt‐crystallized, low molecular weight PLLA slightly below T_m. The structure and properties of the α‐ and β‐form crystals were also studied. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 95–104, 2002