An Aluminum–Sulfur Battery with a Fast Kinetic Response

The electrochemical performance of the aluminum‐sulfur (Al‐S) battery has very poor reversibility and a low charge/discharge current density owing to slow kinetic processes determined by an inevitable dissociation reaction from Al₂Cl₇^? to free Al³⁺. Al₂Cl₆Br^? was used instead of Al₂Cl₇^? as the dissociation reaction reagent. A 15‐fold faster reaction rate of Al₂Cl₆Br^? dissociation than that of Al₂Cl₇^? was confirmed by density function theory calculations and the Arrhenius equation. This accelerated dissociation reaction was experimentally verified by the increase of exchange current density during Al electro‐deposition. Using Al₂Cl₆Br^? instead of Al₂Cl₇^?, a kinetically accelerated Al‐S battery has a sulfur utilization of more than 80 %, with at least four times the sulfur content and five times the current density than that of previous work.     

Nickel(II)-catalyzed addition reaction of arylboronic acids to isatins

A Ni-catalyzed addition of arylboronic acids to isatins was first developed. The reaction, driven by Ni(acac)₂ and dppp as the phosphine ligand, gave 3-aryl-3-hydroxy-2-oxindoles in up to 97% yield. Scopes of benzyl-protected isatins and arylboronic acids were examined. Substituted phenylboronic acids along with fused-ring and heterocyclic boronic acids reacted with isatins smoothly. Preliminary asymmetric catalysis was investigated as well, showing moderate enantioselectivity. The mechanism was also described.     

One-pot ligation strategy for atypical ubiquitin chains synthesis by using the trifluoroacetamidomethyl-protected isopeptide-linked Ub (Tfacm-isoUb) unit

Protein chemical synthesis can provide the homogeneous atypical ubiquitin chains that are usually difficult to obtain by other methods. Herein, we report a new one-pot ligation approach for the synthesis of atypical Ub chains based on the Tfacm-protected isoUb building block with operational simplicity and high efficiency. The key intermediate, the Tfacm-protected isoUb building block can be readily prepared by Fmoc SPPS. The practicality and efficiency of the new method is demonstrated by the successful preparation of K11-linked di-Ub.     

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Methods for the hydrogenation of CO₂ into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO₂ into ethanol over non‐noble cobalt catalysts (CoAlO_x), presenting a significant advance for the conversion of CO₂ into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO₂ to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g^?1 h^?1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlO_x catalyst might be due to the formation of acetate from formate by insertion of *CH_x, a key intermediate in the production of ethanol by CO₂ hydrogenation.     

Superoxide Stabilization and a Universal KO2 Growth Mechanism in Potassium–Oxygen Batteries

Rechargeable potassium–oxygen (K‐O₂) batteries promise to provide higher round‐trip efficiency and cycle life than other alkali–oxygen batteries with satisfactory gravimetric energy density (935 Wh kg^?1). Exploiting a strong electron‐donating solvent, for example, dimethyl sulfoxide (DMSO) strongly stabilizes the discharge product (KO₂), resulting in significant improvement in electrode kinetics and chemical/electrochemical reversibility. The first DMSO‐based K‐O₂ battery demonstrates a much higher energy efficiency and stability than the glyme‐based electrolyte. A universal KO₂ growth model is developed and it is demonstrated that the ideal solvent for K‐O₂ batteries should strongly stabilize superoxide (strong donor ability) to obtain high electrode kinetics and reversibility while providing fast oxygen diffusion to achieve high discharge capacity. This work elucidates key electrolyte properties that control the efficiency and reversibility of K‐O₂ batteries.     

Light‐Induced Reversible Reconfiguration of DNA‐Based Constitutional Dynamic Networks: Application to Switchable Catalysis

The light‐induced reversible and cyclic reconfiguration of constitutional dynamic networks, consisting of supramolecular nucleic acid structures as constituents and a photoisomerizable trans/cis‐azobenzene‐functionalized nucleic acid as the trigger is demonstrated. In addition, the cyclic photochemical reconfiguration of the constitutional dynamic networks guides the switchable on/off operation of an emerging hemin/G‐quadruplex DNAzyme.     

Engineering the Band Gap States of the Rutile TiO2(110) Surface by Modulating the Active Heteroatom

Introducing band gap states to TiO₂ photocatalysts is an efficient strategy for expanding the range of accessible energy available in the solar spectrum. However, few approaches are able to introduce band gap states and improve photocatalytic performance simultaneously. Introducing band gap states by creating surface disorder can incapacitate reactivity where unambiguous adsorption sites are a prerequisite. An alternative method for introduction of band gap states is demonstrated in which selected heteroatoms are implanted at preferred surface sites. Theoretical prediction and experimental verification reveal that the implanted heteroatoms not only introduce band gap states without creating surface disorder, but also function as active sites for the Cr^VI reduction reaction. This promising approach may be applicable to the surfaces of other solar harvesting materials where engineered band gap states could be used to tune photophysical and ‐catalytic properties.     

Solid‐State Electrolyte Anchored with a Carboxylated Azo Compound for All‐Solid‐State Lithium Batteries

Organic electrode materials are promising for green and sustainable lithium‐ion batteries. However, the high solubility of organic materials in the liquid electrolyte results in the shuttle reaction and fast capacity decay. Herein, azo compounds are firstly applied in all‐solid‐state lithium batteries (ASSLB) to suppress the dissolution challenge. Due to the high compatibility of azobenzene (AB) based compounds to Li₃PS₄ (LPS) solid electrolyte, the LPS solid electrolyte is used to prevent the dissolution and shuttle reaction of AB. To maintain the low interface resistance during the large volume change upon cycling, a carboxylate group is added into AB to provide 4‐(phenylazo) benzoic acid lithium salt (PBALS), which could bond with LPS solid electrolyte via the ionic bonding between oxygen in PBALS and lithium ion in LPS. The ionic bonding between the active material and solid electrolyte stabilizes the contact interface and enables the stable cycle life of PBALS in ASSLB.     

原位水解-硝酸镧电位滴定法测定钛合金化铣腐蚀溶液中总氟化物

基于氟钛配合物的原位水解以及硝酸镧电位滴定法建立了测定钛合金化铣腐蚀溶液中总氟化物浓度的新方法。在六次甲基四胺(HMTA)缓冲溶液中,氟钛配合物发生原位水解并释放出游离氟离子,以氟离子选择电极(F-ISE)为指示电极进行测定。对影响测定的各项参数(如p H值、HMTA溶液用量、钛离子浓度等)做了条件实验并予以优化。实验结果表明Ti(Ⅳ)浓度在0~20 g/L范围内对于氟离子测定无干扰,方法的相对标准偏差(RSDs,n=6)在0.27%~0.62%之间,加标回收率在99.5%~101.1%之间。此外,本文对氟钛配合物原位水解反应的机理也进行了探讨,溶液中氟钛配合物的主要存在形式为TiF_6~(2-),适宜的酸度是水解反应进行的必要条件,HMTA作为缓冲溶液为水解反应持续进行提供恒定的p H环境,La(NO_3)_3作为氟清除剂降低游离氟离子浓度促进水解反应的进行,伴随滴定过程氟钛配合物发生完全水解。     

Diarylheptanoids from the fresh pericarps of Juglans sigillata

One new diarylheptanoid (3S)-3′, 4″-epoxy-1-(4′-hydroxylphenyl)-7-(3″-hydroxylphenyl) heptane-3-hydroxy (1), together with eleven known ones (2–12), was isolated from the fresh pericarps of Juglans sigillata. Their structures were elucidated on the basis of extensive spectroscopic methods, including HR-ESI-MS, 1D and 2D-NMR. All isolates were evaluated for their cytotoxic activities in vitro against the growth of human cancer cells lines HT-29 and MCF-7 by MTT assay.