Interaction behaviours of solitoffs: fission, fusion, reconnection and annihilation

The interactions between solitoffs are extensively investigated. Besides the known solitoff fission and fusion interactions, two new types of solitoff interactions are discovered, named the solitoff reconnection and the solitoff annihilation. Taking the asymmetric Nizhnik--Novikov--Veselov equation as an illustrative system, five types of solitoff interactions are graphically revealed on the basis of the analytical solution obtained by the modified tanh function expansion method.     

Simple dose rate measurements for a very high synchrotron X‐ray flux

Dose measurements based on methylene blue (MB) bleaching, widely used for ultraviolet light, can also be applied to X‐rays including very high flux levels. This method has been tested by using both MB bleaching and Fricke dosimetry for a conventional monochromatic X‐ray source and then for `white‐beam' synchrotron radiation. The results show that MB bleaching dosimetry can easily measure X‐ray doses up to at least 10⁵ Gy s^?1, as long as the MB concentration is sufficiently high. This condition can be verified from the deviations from linearity of the bleaching versus exposure time.     

基于跳距修正L-M优化的WSN定位算法

针对DV-Hop定位算法在节点随机分布的网络拓扑环境下存在误差较大的问题,文中通过分析平均跳距估计、未知节点坐标估计区域求解对定位精度的影响,提出了一种基于跳距修正L-M优化的WSN定位算法CLDV-Hop(Correct L-M DV-Hop)。仿真结果表明,在不增加额外开销且仿真环境相同的条件下,CLDV-Hop算法比现有改进的算法具有更高的定位精度,与DV-Hop算法相比精度提高了约33%——41%。     

Luminescent properties of Sr5(PO4)3 Cl:Eu2+, Mn2+ as?a?potential phosphor for UV-LED-based white LEDs

Eu²⁺ and Mn²⁺ co-activated Sr₅(PO₄)₃Cl phosphors with blue and orange color double emission bands, under a broad-band excitation wavelength range of 340–400 nm, were synthesized by the solid-state reaction. It was found that the processing parameters, including the fluxes, annealing time and activators concentrations, affect the emission intensity and other luminescent properties. Energy transfer between Eu²⁺ and Mn²⁺ was discovered and the transfer efficiency was also estimated based on relative intensities of Eu²⁺ and Mn²⁺ emission. Thus the relative strength of blue and orange emission intensities could be tuned by varying the relative concentration of Eu²⁺ and Mn²⁺. Since the photoluminescence excitation spectra of the newly developed Sr₅(PO₄)₃Cl:Eu²⁺, Mn²⁺ phosphors exhibit a strong absorption in the range of 340–400 nm, they are promising for producing UV-LED-based white LEDs.     

基于粪便可见-近红外反射光谱的高山麝慢性肠炎诊断

提出了一种利用粪便可见-近红外反射光谱进行高山麝慢性肠炎诊断的新方法。以FieldSpec？3地物光谱仪采集了125份高山麝粪便（正常粪样70份,慢性肠炎患者粪样55份）的光谱数据,将其随机分成训练集（95份）和检验集（30份）。光谱经S.Golay平滑与一阶导数处理后以主成分分析法（PCA）降维。以前6个主成分（含原始光谱95.16%的特征信息）作为新变量,利用训练集样本,分别以模糊模式识别、BP-神经网络、Fisher线性判别以及Bayes逐步判别四种方法建立高山麝慢性肠炎的诊断模型。对检验集30个未知样的预测表明,Fisher线性判别的准确率为86.7%,模糊模式识别与BP-神经网络模型判别的准确率为90%,Bayes逐步判别的准确率最高,达93.3%。进一步分析发现所有误诊都源于将正常样误判为病样,四种方法对病样的检出率均达100%。说明利用粪便的可见-近红外反射光谱进行高山麝慢性肠炎的快速、非接触性诊断是可行的,且PCA 结合Bayes逐步判别是一种优选方法。     

立式螺旋管汽液两相流沸腾传热恶化实验研究

本文实验研究了低质量流速(500～800 kg·m~(-2)·s~(-1))下的立式螺旋管临界热负荷,对沸腾传热恶化壁温特性和螺旋管临界热负荷影响因素进行分析.并同前人工作汇总,以流量,压力和临界干度为参数,建立了基于局部条件假设的立式螺旋管临界热负荷查询表(Look-Up-Table),共272个点.压力范围6.5～21 MPa,质量流速范围500～1800 kg·m~(-2)·s~(-1).     

多光束激光外差高精度测量玻璃厚度的方法

利用基于激光外差测量技术和激光多普勒技术的非接触式多光束激光外差测量方法,得到了光电探测器输出电流的谐波表达式.讨论了该测量方法用于玻璃厚度超精密测量的可行性及理论依据,并利用Matlab软件对不同情况进行了仿真实验.结果表明：该方法在不同入射角时测量平板玻璃厚度最大的误差为0.3%,明显比其他测量方法精度高. 关键词： 外差探测 多光束激光外差 激光多普勒技术 非接触式测量     

Evaluation and optimization of fMRI single-subject processing pipelines with NPAIRS and second-level CVA

In functional magnetic resonance imaging (fMRI) analysis, although the univariate general linear model (GLM) is currently the dominant approach to brain activation detection, there is growing interest in multivariate approaches such as principal component analysis, canonical variate analysis (CVA), independent component analysis and cluster analysis, which have the potential to reveal neural networks and functional connectivity in the brain. To understand the effect of processing options on performance of multivariate model-based fMRI processing pipelines with real fMRI data, we investigated the impact of commonly used fMRI preprocessing steps and optimized the associated multivariate CVA-based, single-subject processing pipelines with the NPAIRS (nonparametric prediction, activation, influence and reproducibility resampling) performance metrics [prediction accuracy and statistical parametric image (SPI) reproducibility] on the Fiswidgets platform. We also compared the single-subject SPIs of univariate GLM with multivariate CVA-based processing pipelines from SPM, FSL.FEAT, NPAIRS.GLM and NPAIRS.CVA software packages (or modules) using a novel second-level CVA. We found that for the block-design data, (a) slice timing correction and global intensity normalization have little consistent impact on the fMRI processing pipeline, but spatial smoothing, temporal detrending or high-pass filtering, and motion correction significantly improved pipeline performance across all subjects; (b) the combined optimization of spatial smoothing, temporal detrending and CVA model parameters on average improved between-subject reproducibility; and (c) the most important pipeline choices include univariate or multivariate statistical models and spatial smoothing. This study suggests that considering options other than simply using GLM with a fixed spatial filter may be of critical importance in determining activation patterns in BOLD fMRI studies.     

基于非平衡光纤干涉仪的窄线宽激光光源跳模实时测试方法

窄线宽激光器随机发生的跳模现象,是影响光学系统稳定的重要因素.激光器线宽窄往往意味着较长的谐振腔和较小的模间隔,从而给跳模的监测带来了难度.本文提出一种基于非平衡光纤干涉仪的窄线宽光源跳模测试方法,该方法将激光器跳模的频率变化转变为干涉仪的相位变化,并通过相位产生载波(PGC)调制解调技术来检测相位信息,从而实现对跳模过程的监测.该方法灵敏度高,能够长时间连续监控,测试效果优于Fabry-Pérot干涉仪,还可在kHz量级上测量窄线宽激光器的线宽,为单纵模窄线宽激光器研究提供有效的测试手段.