Synthesis,Structures, Luminescent and Magnetic Properties of Heterometallic 5p‐4f Compounds with Ethylenediaminetetra­acetate

A series of heterometallic Ln^III–Sb^III edta‐containing compounds with the formulas [Sb₂(edta)₂Ln]NO₃ · nH₂O [edta = ethylenediaminetetraacetate; Ln = Eu, n = 7 ( 1 ); Gd, n = 7.5 ( 2 ) and Tb, n = 8 ( 3 )] were synthesized and characterized by elemental analyses (EA), powder X‐ray diffraction (PXDP), Fourier transform infrared spectroscopy (FT‐IR), and thermogravimetric analyses (TGA). Their fluorescence and magnetic properties were also studied. The thermal analysis demonstrates the compounds formation of the antimony, lanthanide ions, and edta^4– ligands. FT‐IR spectra reveal that the antimony and lanthanide ions are connected through the carboxylate bridges. The studies of luminescence properties show that compounds 1 and 3 exhibit typical luminescence in the visible region. Furthermore, magnetic properties reveal compounds 2 and 3 have weak ferromagnetic behavior.     

Spectroscopic Investigation on Sonocatalytic Damage of BSA Molecules by FeIII Complexes with Binary Organic Acid Ligands Under Ultrasonic Irradiation

The interaction between bovine serum albumin (BSA) and Fe^III complexes with three binary organic acid (biorga) ligands, [Fe^III(oxa)(H₂O)₄]⁺ (oxa = oxalic acid), [Fe^III(pra)(H₂O)₄]⁺ (pra = propanedioic acid) and [Fe^III(sua)(H₂O)₄]⁺ (sua = succinic acid), as well as the sonocatalytic damage of BSA in the presence of these three Fe^III–biorga complexes under ultrasonic irradiation, were studied by UV–vis and fluorescence spectra. The experimental results show that the fluorescence quenching process of BSA caused by three Fe^III–biorga complexes are all static quenching and the corresponding quenching rate constants (K _q), equilibrium constants (K _A) and the binding site numbers (n) were calculated. The results reveal that, under ultrasonic irradiation, the BSA molecules were obviously damaged by these Fe^III–biorga complexes. In addition, the effects of several factors on the damage of BSA molecules were examined. The experimental results demonstrate that the damage degree of BSA increased with an increase of ultrasonic irradiation time, Fe^III–biorga complex concentration, and ionic strength. In comparison, [Fe^III(pra)(H₂O)₄]⁺ exhibited higher sonocatalytic activity than [Fe^III(oxa)(H₂O)₄]⁺ and [Fe^III(sua)(H₂O)₄]⁺. Finally, the extent of generation of $ \cdot {\text{O}}_{2}^{ - } $ · O 2 ? and ·OH during sonocatalytic processes was estimated. Perhaps, the results will be significant for promoting sonodynamic treatment (SDT) of tumors at the molecular level.     

Tribological behaviors of a novel trilayer nanofilm: the influence of outer chain length and interlayer thickness

Polydopamine (coded as PDA) is reported to be very adhesive and reactive due to the attached functional groups, such as amine and hydroxyl groups. In this work, taking advantage of the condensation between Si–OH of the hydroxylated alkyltrichlorosilane (ATS) and C–OH on PDA surface, ATS molecules with different chain carbon number of 10, 14 and 18 were grafted onto the 3‐aminopropyl triethoxysilane (APTES)‐PDA dual‐layer film, which was composed of PDA outerlayer and APTES underlayer, on Si substrate. Thus, hydrophobic trilayer films coded as APTES‐PDA‐ATS were prepared successfully. In order to reveal the dependence of the tribological behaviors upon the microstructures of the film, tribological experiments were conducted on an atomic force microscope and a ball‐on‐plate tribometer. Experimental results showed that the (micro‐) friction reducing (characterized by a parameter of relative friction coefficient or friction coefficient, RFC or FC) and macro‐wear resisting (characterized by anti‐wear life) behaviors were related with the chain length of outerlayer and the PDA thickness. Specifically, on one hand, as the chain length increases, RFC/FC decreased and macro anti‐wear life lengthened; on the other hand, as PDA gets thicker, RFC increased and the anti‐wear life enhanced. Copyright © 2013 John Wiley & Sons, Ltd.     

Ba2Cd(B3O6)2: A Congruent‐Melting Compound with Isolated B3O6 Units

The single crystals of Ba₂Cd(B₃O₆)₂ were grown by the spontaneous crystallization method for the first time. They crystallize in the centrosymmetric trigonal space group R$\bar{3}$ with a = 7.143(3) Å, c = 17.405(16) Å, and Z = 3. The structure is characterized by isolated B₃O₆ units, and the Ba²⁺ and Cd²⁺ cations connect with B₃O₆ rings to form three dimensional structure. The TG/DSC and XRD results reveal that Ba₂Cd(B₃O₆)₂ melts congruently. First‐principles electronic structure calculation performed with the density functional theory (DFT) method shows that the calculated bandgaps are 4.66 eV, which is in good agreement with the UV/Vis/NIR experimental value 4.59 eV. The calculation shows that the Ba₂Cd(B₃O₆)₂ crystal has a large birefringence (Δn = 0.0875–0.0569 from 270 nm to 2600 nm), which demonstrates that Ba₂Cd(B₃O₆)₂ is a potential birefringence crystal.     

Regular arrays of triangular‐microstructure formed on silicon (111) surface via ultrafast laser irradiation in KOH solution

The regular micrometer‐scale triangular arrays were formed using ultrafast femtosecond laser irradiation on (111) surface of silicon wafer immersed in KOH solution (0.1 g/ml). At low laser fluence, the resulting surface is covered by triangular pits microstructures, whereas at high laser fluence, the structures are transformed to multilayer‐triangular stacks‐microstructures. The number of triangular stacks layer increased as the laser fluence increased. The formation of triangle microstructure arrays depends on both silicon surface crystallographic orientation and the concentration of KOH solution. Either for lower KOH solution concentration (0.02 g/ml) or other silicon crystallographic orientation, triangle arrays cannot be obtained. We attribute the formation of triangular microstructure arrays to the laser‐assisted chemical etching process. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of Li2SnO3 and its application in lithium‐ion batteries

Tin‐based oxide Li₂SnO₃ has been synthesized by a hydrothermal route as negative material for lithium‐ion batteries. The microstructure and electrochemical properties of the as‐synthesized materials were investigated by some characterizations means and electrochemical measurements. The as‐synthesized Li₂SnO₃ is a porous rod, which is composed of many uniform and regular nano‐flakes with a size of 50–60 nm. Li₂SnO₃ also displays an electrochemical performance with high capacity and good cycling stability (510.2 mAh g^?1 after 50 cycles at a current density of 60 mA g^?1 between 0.0 V and 2.0 V verusus Li/Li⁺). Copyright © 2013 John Wiley & Sons, Ltd.     

Concentration induced the interfacial self‐assembly polymorphism of 4, 4′‐dihexadecyloxy‐benzophenon by scanning tunneling microscopy

The concentration effect on a two‐dimensional (2D) self‐assembly of 4, 4′‐dihexadecyloxy‐benzophenon (DHB) has been investigated by scanning tunneling microscopy. The self‐assembly of DHB at the phenyloctane/graphite interface was concentration dependent. Under low concentration, the DHB molecules were adsorbed intactly on the graphite surface. With the increasing of concentration, one of side chains connecting the conjugated moiety stretched into the liquid phase. The coexistence of two self‐assembled structures was observed in a moderate concentration. The result indicated that the van der Waals interactions between the molecules and the graphite lattice were decreasing with the increasing concentration. After the samples were placed in ambient conditions over 24 h, a different self‐assembled structure was obtained on the gas/solid interface, in which the DHB molecules were adsorbed on the surface with only one of the side chains. Both the benzophenon core and the other side chain were extended to the gas phase. The results demonstrated that concentration played an important role in forming the 2D molecular self‐assembly and provided an efficient approach for the control of the DHB molecular nanostructure. Copyright © 2013 John Wiley & Sons, Ltd.     

Modified silver staining in 2DE improves protein detection even at extremely low sample concentration

The typical concentration of protein loaded varies from 0.13 to 1.40 μg/μL for a classical silver staining method in 2DE gel. Here, we present a simple modified classical silver staining method by modifying the silver impregnation and development reaction steps. This modified method detects the protein spots at extremely low loaded concentrations, ranging from 0.0048 to 0.0480 μg/μL. We recommend this modified silver staining as an excellent method for the limited biological samples used for silver‐stained 2DE analysis. Altogether, the protocol takes close to two days from first dimension separation to second dimension separation, followed by silver staining, scanning, and analysis.     

N‐methyl‐2‐pyrrolidonium methyl sulfonate acidic ionic liquid as a new dynamic coating for separation of basic proteins by capillary electrophoresis

A simple and economical CE method has been developed for the analysis of four model basic proteins by employing N‐methyl‐2‐pyrrolidonium methyl sulfonate ionic liquid (IL) as the dynamic coating material based on the interaction of both between electrostatic attraction and hydrogen bond, and between the organic cations of IL and the inner surface of bare fused‐silica capillary. The N‐methyl‐2‐pyrrolidonium‐based IL modified capillary not only generated a stable suppressed electroosmotic flow, but also effectively eliminated the wall adsorption of proteins. Several important parameters such as the IL concentration, pH values, and concentrations of the background electrolyte were optimized to improve the separation of basic proteins. Consequently, under the optimum separation conditions, a satisfied separation of basic proteins including lysozyme, cytochrome c, ribonuclease A, and α‐chymotrypsinogen A with theoretical plates ranging from 2.09 × 10⁵ to 4.48 × 10⁵ plates/m had been accomplished within 15 min. The proposed method first illustrated the effect of hydrogen bond between coating material and inner capillary surface on the coating, which should be a new strategy to design and select more effective coating materials to form more stable coatings in CE.     

A microfluidic chip‐based fluorescent biosensor for the sensitive and specific detection of label‐free single‐base mismatch via magnetic beads‐based “sandwich” hybridization strategy

A novel microfluidic chip‐based fluorescent DNA biosensor, which utilized the electrophoretic driving mode and magnetic beads‐based “sandwich” hybridization strategy, was developed for the sensitive and ultra‐specific detection of single‐base mismatch DNA in this study. In comparison with previous biosensors, the proposed DNA biosensor has much more robust resistibility to the complex matrix of real saliva and serum samples, shorter analysis time, and much higher discrimination ability for the detection of single‐base mismatch. These features, as well as its easiness of fabrication, operation convenience, stability, better reusability, and low cost, make it a promising alternative to the SNPs genotyping/detection in clinical diagnosis. By using the biosensor, we have successfully determined oral cancer‐related DNA in saliva and serum samples without sample labeling and any preseparation or dilution with a detection limit of 5.6 × 10^?11 M, a RSD (n = 5) < 5% and a discrimination factor of 3.58–4.54 for one‐base mismatch.