Semipolar (11\bar 2\bar 2) ZnO thin films grown on LaAlO3‐buffered LSAT (112) single crystals by pulsed laser deposition

Semipolar (11\bar 2 \bar 2) ZnO was successfully grown on (112) LaAlO₃/(LaAlO₃)_0.29(Sr₂AlTaO₆)_0.35 substrate by pulsed laser deposition. The epitaxial relationship is [11\bar 23]_{\rm ZnO} // [11\bar 1]_{\rm LAO/LSAT} with the polar axis of [000\bar 1]_{\rm ZnO} pointing to the surface. For ZnO films with thickness of 1.6 μm, the threading dislocation density is ～1 × 10⁹ cm^–2, and the density of basal stacking faults is below 1 × 10⁴ cm^–1. The (11\bar 2 \bar 2) ZnO exhibits strong D⁰X emissions with a FWHM of 9 meV and very few green–yellow emissions in the low‐temperature (10 K) and room‐temperature photoluminescence spectra, respectively.

     

ZnAl2O4：Tb3+荧光粉的合成、结构及其光学性能研究

通过溶胶-凝胶法制备出不同Tb³⁺掺杂浓度和不同二次煅烧温度下的ZnAl₂O₄:Tb³⁺荧光粉, 并利用X射线衍射(XRD)和荧光光谱等对样品进行了表征。由XRD结果可知,当Tb³⁺掺杂的摩尔分数不大于9%,二次煅烧温度在600℃以上时,所得粉体为结晶性良好的尖晶石相。在紫外光激发下,ZnAl₂O₄:Tb³⁺荧光粉的发射光谱由位于488 nm(⁵D₄→⁷F₆)、542 nm(⁵D₄→⁷F₅)、587 nm(⁵D₄→⁷F₄ )和621.5 nm(⁵D₄→⁷F₃)的4个发射峰组成。研究发现,Tb³⁺的掺杂浓度和二次煅烧温度对样品发光强度有着重要影响,当Tb³⁺的摩尔分数为5%,二次煅烧温度为900℃时,ZnAl₂O₄:Tb³⁺荧光粉的发光最强,继续增加Tb³⁺掺杂浓度或提高煅烧温度,分别会出现浓度猝灭和温度猝灭现象。     

氧化光栅型垂直腔面发射激光器的研究

通过分析矩形出光孔径和亚波长金属光栅结构,发现大孔径高功率垂直腔面发射激光器(VCSEL)的偏振控制的难点在于横模非常复杂。因此提出一种新型的氧化光栅型VCSEL结构,不仅能够很好地在有源区内引入各项异性的增益结构,并且最大的优势还在于能够完美地控制大孔径VCSEL的横模。通过有限元软件对器件有源区的电流分布进行了模拟,发现当光栅脊的宽度为1.8 μm时,载流子在光栅两端聚集的现象基本上可以消除,而且其电流密度分布差可以达到很高。     

强流ECR离子源引出系统研究

为了提高强流ECR 离子源的引出束流品质,分别设计了1# 和2# 引出系统,利用束流引出模拟软件PBGUNS 对1# 和2# 引出系统进行了质子束流引出与传输的模拟计算,结合实际测得的发射度数据分析引出系统,发现2# 引出系统比1# 引出系统引出束流品质高。对ECR 离子源引出系统的电势等位线分布等参数引起的球差进行了简单数学推导及MATLAB 绘图,并结合1# 和2# 引出系统束流相图模拟结果证明了球差会使引出束流品质有效发射度增长,通过适当加大电极孔径可改善束流聚焦情况,得到了束流光学聚焦较好的束流引出系统设计。To improve the quality of extracted ion beam from a high current ECR ion source, 1# and 2# extraction systems were designed and tested. The PBGUNS code was used to simulate the 1# and 2# extraction systems of proton ion beam. The emittance measurement results with the two different extraction systems were compared and analyzed with the simulation, the conclusion that more high quality beam extracted from 2# system than 1# system was got. The formula derivation of ECR ion source extraction system spherical aberration and MATLAB drawing was done by the analyzing on the distribution of extraction field equipotentials, effective emittance increasing caused by spherical berration was proved by 1# and 2# extraction systems beam phase space simulation result, beam focusing would be improved if electrode hole size increasing appropriately and a general concept on good optics focusing of ion beam extraction system was proposed finally.     

Investigations of Pulse‐Plasma‐Polymer Coating on TiO2 Nanoparticles and Their Dispersion

An amorphous acrylic acid (AA) polymer coating was generated on TiO₂ nanoparticles through pulse radio frequency (RF) plasma polymerization. The AA plasma synthesis mechanism was studied by its optical emission spectrum. The chemical structures of AA–plasma‐polymer were carefully investigated by Fourier transform infrared spectroscopy (FTIR). The dispersion behaviors of AA‐coated and uncoated TiO₂ nanoparticles in glycol solution were characterized by ultraviolet absorbency and particle size distribution measurements. The results showed that the aggregation of TiO₂ nanoparticles in glycol solution was effectively lowered and the dispersion was improved a lot after AA–plasma‐polymer coating. The pulse plasma coating parameters played an important role in the dispersion enhancement of TiO₂ nanoparticles. By properly regulating the pulse discharge parameters, the system could gain the highest radical–monomer reactions rate, the most compatible functional groups on the nanoparticles, and the best dispersion in the background media.     

Morphology Development in Multi‐Component Polymer Blends: I Composition Effect on Phase Morphology in PP/PET Polymer Blends

The relationship of the phase morphology of polypropylene/polyethylene‐terephthalate (PP/PET) blends and their corresponding compatibilized blends with composition was investigated using digital image analysis. A diameter, d _g , was defined and calculated to discuss the phase morphology of this polymer blend system. A figure‐estimation method was introduced to determine the width of the distribution of d _g . Based on the method, it is proven that the distribution of d _g obeys a log‐normal distribution and consequently, the distribution width, σ was calculated. Further, a fractal dimension, D _f , was introduced to describe the distribution of main sizes of the particles of the dispersed phase. The results showed that, while d _g increased with the concentration of the dispersed phase, σ and D _f show different dependence relations on composition;σ increases monotonously but D _f shows a maximum at a PET content of 30%, indicating that, even though the whole size distribution is much broader, the distribution of the main body of size becomes more uniform when the content of PET is less than 30%.     

Trace Elements in Lycium barbarum L. Leaves by Inductively Coupled Plasma Mass Spectrometry after Microwave Assisted Digestion and Multivariate Analysis

The concentrations of 14 elements in Lycium barbarum L. leaves collected from the Qaidam basin (China) were determined by inductively coupled plasma mass spectrometry after microwave assisted digestion. This work presents two goals: (1) to determine 14 elements in L. barbarum leaves; (2) to examine the relationship between elements using correlation analysis, principal component analysis, and cluster analysis. The accuracy and precision were verified against a GBW07605 Tea Leaves certified reference material. The results demonstrated that the method was reliable, reproducible, and suitable for determination of the concentrations of trace elements in L. barbarum leaves. Correlation analysis showed that aluminum–copper, arsenic–zinc, manganese–selenium, and chromium–iron have medium correlation coefficients. Principal component loading for L. barbarum leaves extracted seven components explained about 85% of the total variance. Cluster analysis depicts four clusters: (1) arsenic and titanium; (2) calcium, magnesium, manganese, selenium, and zinc; (3) cobalt, iron, and molybdenum; (4) aluminum, copper, and chromium.     

A Novel Pyrene Fluorescent Sensor Based on the π–π Interaction Between Pyrene and Graphene of Graphene–Cadmium Telluride Quantum Dot Nanocomposites

In this article, water-soluble graphene–cadmium telluride quantum dot nanocomposites were fabricated through the synthesis of cadmium telluride quantum dots in the presence of graphene aqueous dispersion. It was found that pyrene could remarkably quench fluorescence of graphene–cadmium telluride quantum dot nanocomposites. On this basis, a novel method for the determination of pyrene was developed. Factors affecting the pyrene detection were investigated, and the optimum conditions were determined. Under the optimum conditions, a linear relationship could be established between the quenching of fluorescence intensity of graphene–cadmium telluride quantum dot nanocomposites and the pyrene concentration in the range of 6.00 × 10^?8–2.00 × 10^?6 mol L^?1 with a correlation coefficient of 0.9959. The detection limit was 4.02 × 10^?8 mol L^?1. Furthermore, the nanocomposites were applied to practical determination of pyrene in different water samples with satisfactory results.     

Preconcentration and Separation of Gold(III) from Ore Samples by Solid-Phase Extraction Prior to Its Catalytic Fluorescent Determination

ABSTRACT

A new catalytic kinetic fluorescent quenching method for the determination of trace gold(III) was investigated. The method was based on the catalytic effect of gold on oxidation of 3-(3′-methylphenyl)-5- (2′-arsenoxylphenylazo) rhodanine by hydrogen peroxide in potassium hydrogen phthalate–hydrochloric acid (pH = 3.4). Under the optimum conditions, the great decrease of fluorescence intensity has a linear relationship against the concentration of gold in the range of 0 to 12.0 µg·L^?1 with a detection limit of 6.0 × 10^?10g·L^?1. The coexistent metal ions can be separated, and gold can be enriched by TBP resin of solid-phase extraction, which greatly improves the selectivity and sensitivity of the system. The method can be used to determine trace amounts of gold in ore samples successfully with satisfactory results.     

Green ultrasound-assisted extraction of carotenoids based on the bio-refinery concept using sunflower oil as an alternative solvent

A green, inexpensive and easy-to-use method for carotenoids extraction from fresh carrots assisted by ultrasound was designed in this work. Sunflower oil was applied as a substitute to organic solvents in this green ultrasound-assisted extraction (UAE): a process which is in line with green extraction and bio-refinery concepts. The processing procedure of this original UAE was first compared with conventional solvent extraction (CSE) using hexane as solvent. Moreover, the UAE optimal conditions for the subsequent comparison were optimized using response surface methodology (RSM) and ultra performance liquid chromatography – diode array detector – mass spectroscopy (UPLC–DAD–MS). The results showed that the UAE using sunflower as solvent has obtained its highest β-carotene yield (334.75 mg/l) in 20 min only, while CSE using hexane as solvent obtained a similar yield (321.35 mg/l) in 60 min. The green UAE performed under optimal extraction conditions (carrot to oil ratio of 2:10, ultrasonic intensity of 22.5 W cm^?2, temperature of 40 °C and sonication time of 20 min) gave the best yield of β-carotene.