水合乙酸锌脱水反应的动力学

用等温热重法和非等温热重法研究了Zn(CH3COO) 2·2H2 O的脱水反应 .在 61.1、62 .8、66.2、69.9℃下的等温热重数据 ,由等转化率下的lnt=E/RT +ln[g(α) /A]进行拟合 ,确定了活化能的大小 ;升温速率为 10℃ /min的非等温热重曲线显示 ,Zn(CH3COO) 2·2H2 O的脱水反应发生在 71～ 10 2℃间 ,其数据通过Doyle Zsako法进行拟合 ,以线性相关系数为判据 ,并结合等温热分析拟合结果 ,得到该脱水反应的积分动力学模式函数g(α) =[-ln( 1-α) ]2 / 3、活化能E =10 0 .8kJ/mol、指前因子ln(A/s-1) =3 6.0 9、动力学补偿效应方程为lnA =0 .3 3 3 9E + 2 .0 10 .     

原子吸收法在有机分析中的应用（Ⅵ）香烟中氢氰酸的分析

原子吸收法在有机分析中的应用（Ⅵ）香烟中氢氰酸的分析谢志海，郎惠云，高云（西北大学化学系，西安，７１００６９）关键词：氢氰酸，测定，原子吸收光谱香烟中的尼古丁，烟焦油等含氮有机物燃烧后将产生氢氰酸，吸入人体后极为有害。国外在这方面的研究始于七十年代，...     

The impact of nonequilibrium gain in a spectral laser diode model

We describe the inclusion of nonequilibrium gain into a self-consistent 2.5D CW spectral laser diode model and report on the use of this model to investigate the origin of gain compression in a 975 nm high-brightness tapered QW laser diode. Nonequilibrium gain is calculated using a dynamic gain model, which simulates the dynamic relaxation of the quantum well carrier energy distributions under the influence of steady-state electrical and optical excitation. Calculated gain and spontaneous emission spectra are included in the laser model via parameterised look up tables. Both simulated and experimentally measured intracavity spontaneous emission spectra show an increased carrier density and a blue-shift of the gain maximum with increasing bias caused by carrier heating and spectral hole burning. The accurate incorporation of nonequilibrium gain compression is therefore vital for the accurate prediction of the operating characteristics of these devices and for the experimental determination of the active region temperature.     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

Crosslinked epoxy materials exhibiting thermal remendablility and removability from multifunctional maleimide and furan compounds

Crosslinked polymeric materials, which exhibit thermal remendability and removability through Diels–Alder (DA) and retro‐DA reactions, were obtained from using multifunctional maleimide and furan compounds as monomers. The synthesized monomers possess low melting points and good solubility in organo solvents to show excellent processing properties. The performance of DA and retro‐DA reactions were demonstrated with DSC and FTIR measurements. High performance of thermal remendablility and removability of the crosslinked materials were observed with SEM and solvent tests. These materials were applicable in advanced encapsulants and structural materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 905–913, 2006     

Vinyl copolymers containing pendant 1,4‐distyrylbenzene and 1,3,4‐oxadiazole chromophores: Preparation and optoelectronic properties

We prepared two vinyl copolymers P1 and P2 containing pendant distyrylbenzene and aromatic 1,3,4‐oxadiazole derivatives, respectively, from their precursor poly(styrene‐ran‐4‐vinylbenzyl chloride) (M_w = 11,400, PDI = 1.18), which had been prepared by the controlled radical polymerization (RAFT). Two main chain polymers containing similar isolated distyrylbenzene ( P3) and aromatic 1,3,4‐oxadiazole ( P4 ) chromophores were also synthesized for comparative study. The resulted copolymers ( P1 – P4 ) are soluble in common organic solvents and are basically amorphous materials with 5% weight‐loss temperature higher than 360 °C. The PL spectral results reveal that the architecture of P1 prevents the formation of inter‐ or intramolecular interaction. The HOMO and LUMO levels of P2 , estimated from cyclic voltammetric data, are ?5.96 and ?3.81 eV, respectively, which are much lower than those of P1 (?5.12 and ?3.11 eV). The emission of blend from P1 and P2 are contributed mainly from distyrylbenzene fluorophore (～450 nm) owing to efficient energy transfer. Moreover, the blend exhibits three kinds of redox behavior depending on their weight ratios. The luminance and current efficiency of the EL device lpar;ITO/PEDOT/ MEH ‐ PPV + P2 /Al) are 503 cd/m² and 0.11 cd/A, which can be improved to 1285 cd/m² and 0.44 cd/A, respectively, as the weight ratio of P2 increases from 0 to 20%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5362–5377, 2006     

Fluorometric study on the interaction between lomefloxacin and bovine lactoferrin.

The binding of lomefloxacin to bovine lactoferrin (BLf) in a dilute aqueous solution was studied using fluorescence spectra. The binding constant (K) and the number of binding sites (n) were obtained by a fluorescence quenching method. The binding distance (r) and energy-transfer efficiency (E) between lomefloxacin and bovine lactoferrin were also obtained according to the mechanism of Fo?rster-type dipole-dipole nonradiative energy-transfer. The effect of lomefloxacin on the conformation of bovine lactoferrin was also analyzed by synchronous fluorescence spectroscopy. The interaction between lomefloxacin and bovine lactoferrin is strong. Lomefloxacin can affect the conformation of bovine lactoferrin to some degree.     

Direct single-layered fabrication of 3D concavo–convex patterns in nano-stereolithography

A nano-surfacing process (NSP) is proposed to directly fabricate three-dimensional (3D) concavo–convex-shaped microstructures such as micro-lens arrays using two-photon polymerization (TPP), a promising technique for fabricating arbitrary 3D highly functional micro-devices. In TPP, commonly utilized methods for fabricating complex 3D microstructures to date are based on a layer-by-layer accumulating technique employing two-dimensional sliced data derived from 3D computer-aided design data. As such, this approach requires much time and effort for precise fabrication. In this work, a novel single-layer exposure method is proposed in order to improve the fabricating efficiency for 3D concavo–convex-shaped microstructures. In the NSP, 3D microstructures are divided into 13 sub-regions horizontally with consideration of the heights. Those sub-regions are then expressed as 13 characteristic colors, after which a multi-voxel matrix (MVM) is composed with the characteristic colors. Voxels with various heights and diameters are generated to construct 3D structures using a MVM scanning method. Some 3D concavo–convex-shaped microstructures were fabricated to estimate the usefulness of the NSP, and the results show that it readily enables the fabrication of single-layered 3D microstructures. PACS 85.40.Hp; 81.16.Nd; 42.82.Cr     

Scanning mirror on a vibrating membrane for dynamic optical trapping

A study of the variation of the spectral shape and the harmonic distribution of the high-order harmonics generated from silver plasma on the frequency chirp of the driving laser radiation (793 nm 48 fs) is reported. The results of the systematic study of the harmonic generation from the 21st order up to the 61st order (λ=13 nm) are presented. A tuning of the harmonic wavelength up to 0.8 nm can be accomplished by variation of the laser chirp. PACS 42.65.Ky; 42.79.Nv; 52.38.Mf     

AN IMPROVED SEARCH-EXTENTION METHOD FOR SOLVING SEMILINEAR PDES

This article will combine the finite element method, the interpolated coefftcient finite element method, the eigenfunction expansion method, and the search-extension method to obtain the multiple solutions for semilinear elliptic equations. This strategy not only grently reduces the expensive computation, but also is successfully implemented to obtain multiple solutions for a class of semilinear elliptic boundary value problems with non-odd nonlinearity on some convex or nonconvex domains. Numerical solutions illustrated by their graphics for visualization will show the efficiency of the approach.