Covalent functionalization of multi-walled carbon nanotubes by lipase

Lipase from Candida rugosa was covalently anchored onto acid-treated multi-walled carbon nanotubes (MWNTs) through a self-catalytic mechanism. A variety of characterization techniques including FTIR, Raman spectroscopy, and XPS were employed to demonstrate the formation of the ester linkage between lipase and MWNTs. The MWNTs-lipase biocomposites showed significantly increased solubility in some common-used organic solvents, such as THF, DMF and chloroform. This study may offer a novel and facile route for covalent modification of carbon nanotubes, and expand the potential utilization of both lipases and MWNTs in the fields of biocatalyst and biosensor.     

sl玻色子体系在U(2l+1)O(2l+2)过渡区的严格解

利用无穷维李代数方法得到了相互作用sl玻色子体系在U( 2l+ 1 ) O( 2l+ 2 )过渡区的能谱和波函数的严格解 .给出了该系统Bethe假定方程的数值解法 .     

Structural effects of multiple-bonds on aggregating tendencies of long-chain esters

The kinetics of the hydrolysis of p-nitrophenyl esters of three types of single-chain carboxylic acids, namely, saturated, olefinic and acetylenic, was investigated in two aquiorgano binary solvent systems, DMSO-H₂O and dioxane (DX)-H₂O. The ester probes used are: octanoic (C8), dodecanoic (C12) , stearic (C18) , oleic (C18-ol) , elaidic (C18-el ) and stearolic (C18-st). The order of measured CAgC values is: C18-ol>C18-el>C18>C18-st, whereas the order of decreasing magnitude of the observed hydrolytic rate constants of the monomeric species (k_m) is: C18>C18-el>C18-ol> C18-st. These rather unanticipated results are discussed.     

单件小批生产系统下模糊优化的动态随机投入产出模型

本文针对单件小批量生产系统 ,建立了模糊优化的动态随机投入产出模型 ,同时给出了该模型的递推解法 ,并用此模型对某单件小批企业在生产计划期的商品量进行了规划     

The Existence of Periodic Orbits for Higher Dimensional Autonomous Systemswith Small Perturbations

ＴｈｅＥｘｉｓｔｅｎｃｅｏｆＰｅｒｉｏｄｉｃＯｒｂｉｔｓｆｏｒＨｉｇｈｅｒＤｉｍｅｎｓｉｏｎａｌＡｕｔｏｎｏｍｏｕｓＳｙｓｔｅｍｓｗｉｔｈＳｍａｌｌＰｅｒｔｕｒｂａｔｉｏｎｓＪｉａｎｇＬｉｑｉｎｇ（蒋里强）；ＺｈｏｕＹｉ（周毅）；ＦａｎＹｅ（范晔）（...     

Hybrid organosilazane/organosilylamine telechelic oligomers—I. Two-dimensional NMR spectroscopy characterization of dimethylsilylethylenediamine oligomers

The detailed characterization of multifunctional hybrid organosilazane/organosilylamine telechelic oligomers by IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy in one and two dimenions has been undertaken. The specific multifunctional oligomers, comprising NH/NH₂ or SiCl functionalities depending on the monomer feed-ratio, were prepared from mono- and di-functionally reacted dichlorodimethylsilane (DDS) and mono-, di-, tri- and tetra-functionally reacted ethylenediamine (EDA). Varying the feed-ratio afforded control of the microstructures of the oligomers and the preparation of oligomers with, in some cases, conterminously located silicon–chlorine (SiCl) groups. The combination of the NMR methods with the IR technique has enabled the detailed microstructural characterization of the oligomers and the identification of the functionalities therein. This approach and the knowledge gained from the DDS/EDA system has been applied to the microstructural characterization of other hybrid organosilazane/silylamine preceramic telechelic oligomers.     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

Ga1-xInxAs/InAsyP1-y/InP异质结的MOCVD生长及表征

Ga1-xInxAs(x>0.53)材料是未来长距离低损耗光纤通信的理想光源材料和探测器材料之一.我们采用水平常压MOCVD系统,在InP衬底上成功地生长了Ga1-xInxAs(x>0.53)/InAsyP1-y/Inp异质结材料.其中InAs1-yPy为组份阶梯变化的多层结构.由样品的(400)面X光衍射结果测定了各层组份.由二次离子质谱(SIMS)得到了样品剖面组份变化结果,证明InAs1-yPy层组份为阶梯状变化的.通过对光致发光结果和X光衍射结果比较,可以看到,InAsyP1-y层通过位错和弹性畸变二种方式来释放或积累Ga1-xInxAs与InP间的失配应力,从而减少了Ga1-xInxAs中的失配位错.有效地改善了Ga1-xInxAs的质量.已获得了x高达0.94表面光亮的Ga1-xInxAs/InAs1-yPy/InP异质结材料.     

热辐射驱动烧蚀平面金靶的数值定标定律

利用一维辐射流体力学编码数值研究了辐射烧蚀波在平面金靶中的传播情况,并在常温边界条件下得到了辐射流、烧蚀压、质量烧蚀率和特征等离子体密度的定标定律。     

一种新的$1/f$过程小波模型

给出了一种新的二进小波1/f过程模型,从理论上证明了一类谱指数为H的近似1/f过程可通过一簇平稳随机过程产生.由于所提方法利用了1/f过程小波系数的相关性,因而有效地减少了合成1/f过程的谱误差.数值实验结果表明,新模型很好地改进了已有模型.