Detecting trace amounts of water in hydrocarbon matrices with infrared fiberoptic evanescent field sensors

Water is a common contaminant in a variety of industrial oils and petroleum products. Thus, the detection of water in these products is of substantial relevance. Hence, this study focuses on quantifying trace amounts of water in hydrocarbons using hexane as a model system for industrial oils and petroleum matrices via mid-infrared (MIR) evanescent field absorption spectroscopy. A silver halide fiberoptic waveguide was used to interrogate in situ water-in-hexane emulsions. Either unmodified fibers or waveguides surface-modified with polyacrylic acid layers were used. The limits of detection (LOD) and limits of quantification (LOQ) of water in hexane utilizing tin-crosslinked polyacrylic acid modified fibers were 76 and 170 ppm, respectively. Consequently, the IR absorption signature of water in hexane is detectable at concentrations as low as 10 ppm. The proposed fiberoptic sensing strategy requires a single measurement only, requires no sample preparation, and thus has potential for the direct in situ detection and monitoring of water in industrial oils and petroleum products.     

Conformational flexibility of pyrimidine ring in adenine and related compounds

The structural non-rigidity of aromatic pyrimidine rings in adenine and selected related compounds has been investigated by quantum chemical non-empirical methods of calculation at the MP2 and DFT levels of theory. The results of the calculations demonstrate that the pyrimidine ring possesses a notable degree of conformational flexibility despite its aromatic character. The transition of the heterocycle from a planar equilibrium geometry to a non-planar structure with an endocyclic torsion angle of ±20° results in an energy increase of less than 2.8 kcal/mol. An analysis of the population of ground and excited vibrational levels for the lowest out-of-plane vibration of the ring indicates that in adenine 45% of the molecules have a non-planar pyrimidine ring with relevant torsion angle up to ±17° at any moment of time.     

Effects of Spiro-Cyclohexane Substitution of Nitroxyl Biradicals on Dynamic Nuclear Polarization

Spiro-substituted nitroxyl biradicals are widely used as reagents for dynamic nuclear polarization (DNP), which is especially important for biopolymer research. The main criterion for their applicability as polarizing agents is the value of the spin–spin exchange interaction parameter (J), which can vary considerably when different couplers are employed that link the radical moieties. This paper describes a study on biradicals, with a ferrocene-1,1′-diyl-substituted 1,3-diazetidine-2,4-diimine coupler, that have never been used before as DNP agents. We observed a substantial difference in the temperature dependence between Electron Paramagnetic Resonance (EPR) spectra of biradicals carrying either methyl or spirocyclohexane substituents and explain the difference using Density Functional Theory (DFT) calculation results. It was shown that the replacement of methyl groups by spirocycles near the N-O group leads to an increase in the contribution of conformers having J ≈ 0. The DNP gain observed for the biradicals with methyl substituents is three times higher than that for the spiro-substituted nitroxyl biradicals and is inversely proportional to the contribution of biradicals manifesting the negligible exchange interaction. The effects of nucleophiles and substituents in the nitroxide biradicals on the ring-opening reaction of 1,3-diazetidine and the influence of the ring opening on the exchange interaction were also investigated. It was found that in contrast to the methyl-substituted nitroxide biradical (where we observed the ring-opening reaction upon the addition of amines), the ring opening does not occur in the spiro-substituted biradical owing to a steric barrier created by the bulky cyclohexyl substituents.     

Micro-structure and frictional characteristics of beetle’s joint

Geometric and micro-structure design, tribology properties of beetle joints were experimentally studied, which aimed to enlighten ideas for the joint design of MEMS. The observation by using SEM and microscopy suggested that beetle’s joints consist of a concave surface matched with a convex surface. The heads of the beetles, rubbing with flat glass, were tested in fresh and dried statuses and compared with sapphire ball with flat glass. Frictional coefficient of the joint material on glass was significantly lower than that of the sapphire sphere on glass. The material of the joint cuticle for convex surface is rather stiff (the elastic modulus 4.5 Gpa) and smooth. The surface is hydrophobic (the contact angle of distilled water was 88.3°). It is suggested here that the high stiffness of the joint material and hydrophobicity of the joint surface are parts of the mechanism minimizing friction in insect joints.     

Investigation of Sr uptake by birnessite-type sorbents from seawater

Sorption of micro- and microamounts of Sr from seawater has been studied using granulated Na-birnessite. Distribution coefficients of ⁹⁰Sr in the natural seawater are 0.8–1.2?×?10³ ml g^?1, in the model seawater they are 1.6–1.8?×?10³ ml g^?1. Application of Na-birnessite was shown to be prospective in sorption–desorption–regeneration regime. In dynamic sorption conditions, over 150 bed volumes of seawater can be purified till 5% breakthrough occurs at feed rate 10 BV h^?1. Na-birnessite can be used for ⁹⁰Sr radionuclide removal from liquid radioactive wastes containing seawater.

     

Electronic, Magnetic, and Magnetoresistance Properties of the n=2 Ruddlesden-Popper Phases Sr3Fe2−xCoxO7−δ (0.25≤x≤1.75)

A series of oxygen-deficient n=2 Ruddlesden-Popper phases, Sr₃Fe_2−xCo_xO_7−δ (0.25≤x≤1.75), were prepared by solid-state reactions. Temperature-dependent susceptibility and field-dependent magnetization data indicate that for x≥0.25 the dominant magnetic interactions are ferromagnetic. The onset of strong ferromagnetic interactions is evident at ∼200 K, and a transition to a cluster-glass state is observed for all compositions below ∼45 K. The temperature variation of resistivity for all the compounds shows variable-range hopping behavior with two different localization energy scales: one for T<40 K and another for T>80 K. Large negative magnetoresistance (the largest MR ∼−65% for x=0.25) is observed for all phases. The magnetic susceptibility, Mössbauer and X-ray absorption near-edge spectroscopy data indicate that the formal oxidation state of Fe is close to 4+. The key role of d delocalization in the Sr₃Fe_2−xCo_xO_7−δ system is compared to the Sr₃Fe_2−xMn_xO_7−δ series, where d localization dominates the properties.     

The mechanism of formamide hydrolysis in water from ab initio calculations and simulations

The neutral hydrolysis of formamide in water is a suitable reference to quantify the efficiency of proteolytic enzymes. However, experimental data for this reaction has only very recently been obtained and the kinetic constant determined experimentally is significantly higher than that predicted by previous theoretical estimations. In this work, we have investigated in detail the possible mechanisms of this reaction. Several solvent models have been considered that represent a considerable improvement on those used in previous studies. Density functional and ab initio calculations have been carried out on a system which explicitly includes the first solvation shell of the formamide molecule. Its interaction with the bulk has been treated with the aid of a dielectric continuum model. Molecular dynamics simulations at the combined density functional/molecular mechanics level have been carried out in parallel to better understand the structure of the reaction intermediates in aqueous solution. Overall, the most favored mechanism predicted by our study involves two reaction steps. In the first step, the carbonyl group of the formamide molecule is hydrated to form a diol intermediate. The corresponding transition structure involves two water molecules. From this intermediate, a water-assisted proton transfer occurs from one of the hydroxy groups to the amino group. This reaction step may lead either to the formation of a new reaction intermediate with a marked zwitterionic character or to dissociation of the system into ammonia and formic acid. The zwitterionic intermediate dissociates quite easily but its lifetime is not negligible and it could play a role in the hydrolysis of substituted amides or peptides. The predicted pseudo-first-order kinetic constant for the rate-limiting step (the first step) of the hydrolysis reaction at 25 degrees C (3.9x10(-10) s(-1)) is in excellent agreement with experimental data (1.1x10(-10) s(-1)).     

Thiazolopyridinium salts with an active methyl group and cyanine dyes based on them

5-Methyl- and 7-methylthiazolo[3,2-a]pyridinium salts were synthesized. Condensations leading to the formation of cyanine dyes were carried out at the active methyl groups of these salts.     

Hilic MS/MS determination of amino acids in herbs of Fumaria schleicheri L., Ocimum basilicum L., and leaves of Corylus avellana L.

The aim of research was to study the content of amino acids using in extracts of Fumaria schleicheri L., Ocimum basilicum L., and Corylus avellana L. by HILIC MS/MS method. Separation of amino acids in the samples was carried out with Acquity H-class UPLC system (Waters, Milford, USA) equipped with SeQuant ZIC-Hilic collumn (2.1 × 150 mm, 3.5 μm) (Merck Millipore, Darmstadt, Germany). The MS/MS fragment ion chromatograms of the test solutions established the presence of 19 amino acids. The obtained results have shown that O. basilicum L. characterized the highest concentrations of different neurogenic amino acids (128.1 mg/kg), comparing with F. schleicheri L. and C. avellana L. (57.72 and 52.91 mg/kg, respectively).     

Sarin and Soman: Structure and Properties

The most stable conformers of sarin (isopropyl methylphosphonoflouridate) and soman (pinacolyl methylphosphonofluoridate) are determined in high-level-correlated calculations with extended Gaussian basis sets. The two molecules are found to have three low-energy conformers each. For both molecules two of the lowest energy conformers have almost the same energies with a very small barrier separating the corresponding minima. The third conformer of sarin is found to lie about 1 kcal/mol above the lowest energy form. For soman the corresponding value is equal to about 4 kcal/mol. The significance of these data for the mechanism of the toxic action of sarin and soman is discussed. According to our investigations sarin and soman are highly similar electronically and differences in their features arise mostly from the size and spatial arrangement of the alkoxy substituent at phosphorus. Also the influence of solvents on the conformations and solvation energies of sarin and soman is investigated.