Super acid-induced Pummerer-type cyclization reaction: improvement in the synthesis of chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines

Improved synthesis of four stereoisomeric chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines (1a, b, ent-1a, b) was achieved via the super acid-induced cyclization of chiral N-[1-methyl-2-(phenylsulfinyl)ethyl]-N-(1-phenylethyl)formamides (4a, b, ent-4a, b) using the Pummerer-type cyclization reaction as a key step. The cyclization leading to the isoquinoline ring proceeded in a quantitative manner when trifluoromethane sulfonic acid (TFSA) was used as the super acid, although Friedel-Crafts-type alkylation of 4-phenylsulfanyl TIQ derivatives (5) with benzene used as the solvent accompanied cyclization to yield the 4-phenyl-TIQs (7). The byproduct (7) was exclusively formed when a large excess amount of TFSA was used.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.     

Conformational peculiarities of alcohols incorporated in lyotropic and thermotropic liquid crystals

Conformational characteristics of 1-butanol incorporated not only in hexagonal and lamellar aggregates formed by a lyotropic liquid crystal composed of sodium octanoate, 1-butanol, and water but also in a thermotropic liquid crystal, 4'-methoxybenzylidene-4-n-butylaniline (MBBA), have been investigated from 2H NMR quadrupolar splittings of the perdeuterated and partially deuterated compounds. In the lyotropic phases, 1-butanol shows strong trans preferences and renders itself extended, and octanoate decreases the trans fraction toward the methyl terminal to fill the inner space of the aggregate on behalf of 1-butanol. In MBBA, 1-butanol prefers globular conformations. This tendency was also indicated from the phase behaviors of 1-butanol/MBBA and 1-decanol/MBBA systems. In the nematic field, two successive C-C bonds of 1-butanol mostly adopt g+/-g+/- conformations, which are formed in the vicinity of the headgroup of 1-decanol in the lamella of the sodium octanoate/1-decanol/water system. A large degree ofconformational freedom near the hydroxyl group of alcohols, being shown by ab initio molecular orbital calculations at the Gaussian-2 level, permits them to change conformation for each environment.     

Laser-induced orientational change of nematic liquid crystalline molecules mediated by photochromic reactions of surface azobenzenes

The alignment of nematic liquid crystalline (LC) molecules with respect to the LC cell surface was regulated between the homeotropic (H) state and the parallel (P) state by the photochromic trans—cis isomerization of surface-attached azobenzene (Az) moieties. By bringing the angular-selective photoreaction into the system, the orientational order in the P state was significantly improved to attain a universal orientational axis over the entire irradiated area, which was rotatable and erasable photochemically. Laser pulse experiments revealed that the allignment relaxation time τ was reduced from 1000 to 30 ms by increasing the pulse intensity from 10 to 20 mJ cm⁻². Strong coupling between the LC and Az molecules was indicated.     

Regioselective lithiation of II-(arene)chromium tricarbonyl complexes

Chromium tricarbonyl complexes of 3-methoxybenzyl alcohol and related compounds were selectively lithiated at the 4-position in contrast to the corresponding metal free arene compounds. The resulting 4-lithio complexes were converted to the 4-substituted arene compounds in moderate to excellent yields through the reactions with proper electrophiles and subsequent demetalation.     

NAD(P)+-NAD(P)H model. 38. Reduction of aldehyde by 1,4-dihydroquinolin derivative

Benzaldehyde are reduced to benzyl alcohol by a model compound of NAD(P)H almost quantitatively. Reductions of some other aldehydes are also mentioned.     

Mechanism of the molecular hysteresis

The redox behavior in acetone solution of (1,5-dithiacyclooctane 1-oxide)bis(pentaammineruthenium(II)) has been characterized, where the concept of “molecular hysteresis” is presented. Detailed thermodynamics for the complex are studied, in which intramolecular electron transfer rates for Ru³⁺OS/Ru²⁺→Ru²⁺SO/Ru³⁺ were determined as 0.12 sec^?1 and 0.055 sec^?1. The molecular hysteresis consists of two important factors: isomerizations for the sulfoxideruthenium complexes and the slow intramolecular electron transfer in the complex; both are examined. Isomerization rates for Ru³⁺S→O and Ru²⁺O→S determined range from 0.4 to 5000 sec^?1 and from 0.7 to 16 sec^?1, respectively, for [Ru(NH₃)₅(sulfoxide)]^2+/3+. A mechanism for the slow electron transfer in the complex is also presented. Features of molecular hysteresis are discussed.     

Engineered biosynthesis of plant polyketides: chain length control in an octaketide-producing plant type III polyketide synthase

The chalcone synthase (CHS) superfamily of type III polyketide synthases (PKSs) produces a variety of plant secondary metabolites with remarkable structural diversity and biological activities (e.g., chalcones, stilbenes, benzophenones, acrydones, phloroglucinols, resorcinols, pyrones, and chromones). Here we describe an octaketide-producing novel plant-specific type III PKS from aloe (Aloe arborescens) sharing 50-60% amino acid sequence identity with other plant CHS-superfamily enzymes. A recombinant enzyme expressed in Escherichia coli catalyzed seven successive decarboxylative condensations of malonyl-CoA to yield aromatic octaketides SEK4 and SEK4b, the longest polyketides known to be synthesized by the structurally simple type III PKS. Surprisingly, site-directed mutagenesis revealed that a single residue Gly207 (corresponding to the CHS's active site Thr197) determines the polyketide chain length and product specificity. Small-to-large substitutions (G207A, G207T, G207M, G207L, G207F, and G207W) resulted in loss of the octaketide-forming activity and concomitant formation of shorter chain length polyketides (from triketide to heptaketide) including a pentaketide chromone, 2,7-dihydroxy-5-methylchromone, and a hexaketide pyrone, 6-(2,4-dihydroxy-6-methylphenyl)-4-hydroxy-2-pyrone, depending on the size of the side chain. Notably, the functional diversity of the type III PKS was shown to evolve from simple steric modulation of the chemically inert single residue lining the active-site cavity accompanied by conservation of the Cys-His-Asn catalytic triad. This provided novel strategies for the engineered biosynthesis of pharmaceutically important plant polyketides.     

Optically active copolyamides by melt and solution condensation polymerization

The melt and solution condensation copolymerization of nylon salts which were prepared from d-camphoric acid and adipic acid with hexamethylenediamine were carried out, and optically active copolyamides were obtained. The copolyamides obtained had a positive specific rotation. The specific rotations for the copolyamides increased with increasing content of d-camphoryl units in the copolymers. The optical rotatory dispersion of the copolyamides had positive curves and were found to fit the simple Drude equation. The λ_c values of the polymers obtained by the melt and solution condensation polymerization were 241 mμ and 245 mμ, respectively.     

Synthesis and pharmacology of 3,4-dihydro-3-oxo-1,4-benzoxazine-8-carboxamide derivatives, a new class of potent serotonin-3 (5-HT3) receptor antagonists.

A series of 3,4-dihydro-3-oxo-1,4-benzoxazine-8-carboxamide derivatives was synthesized and evaluated for serotonin-3 (5-HT3) receptor antagonistic activity assessed by their ability to antagonize the von Bezold-Jarish (BJ) effect in rats. Derivatives bearing 1-azabicyclo[2.2.2]oct-3-yl moiety as a basic function attached to the carboxamide at position 8 showed more potent antagonistic activity than those bearing the other three basic moieties. Structure-activity relationships of this series showed that methyl and chloro groups were more effective as substituents at positions 4 and 6, respectively. The representative compound 15 (Y-25130) in this series showed potent antagonistic activity on the BJ effect (ED50 = 1.3 micrograms/kg i.v.), high affinity for 5-HT3 receptor (Ki = 2.9 nM) and complete protection against cisplatin-induced emesis in dogs at a dose of 0.1 mg/kg i.v.