POLYETHYLENE GLYCOL-MODIFIED HEMATOPORPHYRIN AS PHOTOSENSITIZER

Abstract— Hematoporphyrin, having two carboxylic groups, was coupled with α-(3-aminopropyl)-ω-methoxypoly(oxyethylene), PEG-NH₂, through acid-amide bond formed with carbodtimide. PEG-modified hematoporphyrin was readily soluble not only in neutral aqueous solution but also in organic solvents. Its absorption spectrum showed a sharp band at 376 nm in neutral aqueous solution and at 403 nm in benzene. Modified hematoporphyrin acted as a photosensitizer; imidazole and indole were photooxidized in organic solvents such as benzene or chloroform, and uric acid was also photooxidized in neutral aqueous solution.     

Photodegradation of polyethylene in the presence of ferric salt: Influence of ferric acetylacetonate on model compounds

The influence of ferric acetylacetonate [Fe(acac)₃] on the photodegradation of model compounds of polyethylene (PE) was examined. By studying electron-spin-resonance (ESR) spectra of photoirradiated compounds such as 1-octene and 1,7-octadiene, which contain carbon double bonds, Fe(acac)₃ was found to accelerate the formation of allyl radical by contact with them. On the other hand, Fe(acac)₃ suppressed the radical formation based on Norrish type I reaction in a carbonyl group of compounds such as 2-octanone and 3-octanone. Based on the study of ultraviolet (UV) spectra as well as ESR spectra on photoirradiated samples, the influence of Fe(acac)₃ on the photodecomposition of model compounds of PE was discussed. Finally, the discussion turned to the mechanism of photodecomposition of PE in the presence of ferric salt.     

Vibrational spectra and molecular conformations of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes

The Raman and IR spectra of 1,5-dichloro- and 1,5-dibromopentanes and 1,6-dichloro-and 1,6-dibromohexanes have been measured. The normal coordinates have been calculated for these molecules using a consistent set of force constants and the molecular conformations studied by analysing the spectra with reference to the results of the calculations. In the crystalline solid state, 1,5-dichloropentane assumes the trans-trans-trans-gauche form and 1,5-dibromopentane, 1,6-dichloro- and 1,6-dibromohexanes assume the all-trans form. The normal coordinate treatment with the well-established force field was of great help in determining the whole molecular form of the relatively large chain molecules.     

Mycosamine orientation of amphotericin B controlling interaction with ergosterol: sterol-dependent activity of conformation-restricted derivatives with an amino-carbonyl bridge

Amphotericin B (AmB 1) is known to assemble together and form an ion channel across biomembranes. The antibiotic consists of mycosamine and macrolactone moieties, whose relative geometry is speculated to be determinant for the drug's channel activity and sterol selectivity. To better understand the relationship between the amino-sugar orientation and drug's activity, we prepared conformation-restricted derivatives 2-4, in which the amino and carboxyl groups were bridged together with various lengths of alkyl chains. K+ influx assays across the lipid-bilayer membrane revealed that ergosterol selectivity was markedly different among derivatives; short-bridged derivative 2 almost lost the selectivity, while 3 showed higher ergosterol preference than AmB itself. Monte Carlo conformational analysis of 2-4 based on NOE-derived distances indicated that the amino-sugar moiety of 2 comes close to C41 because of the short bridge, whereas those of 3 and 4 are pointing outward. The mutual orientation of the amino-sugar moiety and macrolide ring is so rigid in derivatives 2 and 3 that these conformations should be unchanged upon complex formation in lipid membranes. These results strongly suggest that the large difference in sterol preference between derivatives 2 and 3 is ascribed to the different orientation of amino-sugar moieties. These findings allowed us to propose a simple model accounting for AmB-sterol interactions, in which hydrogen bonding between 2'-OH of AmB and 3beta-OH of ergosterol plays an important role.     

Photochemical aromatic hydroxylation by aromatic amine N-oxides: remarkable solvent effect on NIH-shift

Photooxygenations of 4-²H-anisole ($\text{3}$) and o-xylene ($\text{5}$) by 3-methylpyridazine 2-oxide ($\text{1}$) or pyridine 1-oxide ($\text{2}$) were studied in a variety of solvents at varying irradiation temperatures. Remarkable solvent effect on NIH-shift coupled with their hydroxylation processes was observed.     

Studies on polyyne polymers containing transition metals in the main chain. VII. Synthesis and characterization of palladium-polyyne polymers

Metal-polyyne polymers consisting of palladium and conjugated acetylenic systems, where P_D and R represent the —Pd(PBu₃)₂—moiety and alkyl groups, respectively, were prepared by polycondensation between palladium chlorides and α,ω-diethynyl compounds in amines using a catalytic amount of cuprous iodide. The molecular weights of the polymers formed were greatly affected by the basicity of the amines and the addition of free phosphines to the polymerization system. Under the optimum conditions, i.e., in the presence of CuI and PBu₃ (in molar ratio 1/4) in piperidine at room temperature, polymer Ia (R¹ = R² = H) having M?_w = 29,000 was obtained.     

Application of non-thermal atmospheric pressure ac plasmas to the carbon dioxide reforming of methane

Methane conversions of 11.9%, yields of hydrogen as high as 23.3% and energy yields of 1.0 mol H₂/kWh have been achieved from CO₂ reforming of CH₄ in non-thermal, atmospheric pressure plasma reactors with Pt coated electrodes. Two reactors have been studied. A novel fan type reactor consisting of a movable rotor and immobile stator produced the highest yields in contrast to a tube type (silent discharge) reactor with a glass dielectric barrier. Conversions, yields of hydrogen and energy yields (expressed as mol H₂/kWh) were studied for CO₂/CH₄ concentrations of 1.1% and 5.0% in He as a function of flow rate and input voltage. Hydrogen yields are observed to increase as the input voltage is increased from 411 V to 911 V and the flow rate is decreased from 100 cc/min to 30 cc/min. Energy yields vary only slightly with input voltage and flow rate. Hydrogen yields show little dependence on CO₂/CH₄ concentrations, but energy yields are approximately five times greater for the 5.0% mixture than the 1.1% mixture. Selectivities to H₂, CO, coke, and low molecular weight hydrocarbons were also evaluated and compared to data obtained without CO₂ in the feed. Hydrogen selectivities of nearly 100% were obtained, with small amounts of ethane and propane as the only observed side products and the selectivites were approximately the same whether CO₂ was present or absent in the mixture. However, the reaction proceeds much more cleanly when CO₂ is present, producing CO. The syngas product has an H₂ : CO ratio of 1.5 with the fan type reactor and 0.67 with the tubular reactor. In the absence of CO₂, coke is the main carbonaceous product. Under all conditions studied the fan type reactor demonstrated higher methane conversions (up to 11.9%) and selectivities to hydrogen.     

Distributed computing and NMR constraint-based high-resolution structure determination: applied for bioactive Peptide endothelin-1 to determine C-terminal folding

Distributed computing has been implemented to the solution structure determination of endothelin-1 to evaluate efficiency of the method for NMR constraint-based structure calculations. A key target of the investigation was determination of the C-terminal folding of the peptide, which had been dispersed in previous studies of NMR, despite its pharmacological significances. With use of tens of thousands of random initial structures to explore the conformational space comprehensively, we determined high-resolution structures with good convergences of C-terminal as well as previously defined N-terminal structures. The previous studies had missed the C-terminal convergence because of initial structure dependencies trapped in localized folding of the N-terminal region, which are strongly constricted by two disulfide bonds.     

Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).     

羟基羧酸钛(Ⅲ)配合物的合成和热性质研究

三氯化钛分别与苹果酸铵、酒石酸铵和柠檬酸铵反应，制得三种新的固态配合物：苹果酸羟基钛(Ⅲ)、酒石酸羟基钛(Ⅲ)和柠檬酸钛(Ⅲ)(化学式分别为Ti(OH)(C₄H₄O₅)·1.5H₂O、Ti(OH)(C₄H₄O₆)·1.5H₂O和Ti(C₆H₅O₇)·1.5H