Epitaxial strain effects on the metal-insulator transition in V2O3 thin films

Effects of epitaxial stress on the metal-insulator transition of V₂O₃ have been studied for in the form of epitaxial thin films grown on α-Al₂O₃ (0001) and LiTaO₃ (0001) substrates. A metallic phase is stabilized down to 2 K in the V₂O₃ thin film on α-Al₂O₃ (0001), where the a-axis is compressed by 4% owing to large epitaxial stress. On the other hand, the transition temperature T_MI is raised by 20 K from the value of 170 K in bulk samples in the film on LiTaO₃ (0001), where the a-axis is expanded. These results suggest an intimate relationship between the a-axis length and T_MI in V₂O₃. The conductivity of the metallic ultrathin films shows logarithmic temperature dependence below 20 K, probably due to the Anderson localization in two-dimensional systems.     

Direct Monitoring of Thickness and Refractive Index of Optical Thin Film Deposited on Fiber End-face

We propose a system for depositing thin films on waveguides which enables low-temperature deposition and precise control of the refractive index and film thickness. It is composed of a conventional ion-beam sputtering (IBS) system and a new system for directly monitoring film characteristics during deposition. We controlled refractive indices over a wide range from 1.52 to 1.97 by moving the sputtering targets (SiO₂ and Si₃N₄) in the IBS system. The refractive index or film thickness was in-situ monitored by observing the optical power reflected from the end-face of a monitoring fiber set in the deposition chamber. Antireflection coating films were successfully deposited on a fiber end-face and a laser diode chip facet with low reflectivity from 0.05 to 0.07%. This deposition system is attractive for constructing highly functional optical devices for future photonic networks.     

Fabrication of novel layer-by-layer assembly films composed of poly(lactic acid) and polylysine through cation-dipole interactions

Novel layer-by-layer (LbL) assembly films composed of poly( L-lysine) (PLL) and poly( D-lactic acid) (PDLA) were prepared by the alternate immersion of a gold substrate into an aqueous PLL solution and an acetonitrile solution of PDLA. The formation of the LbL assembly film was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy observation, and attenuated total reflection Fourier transform infrared spectroscopy measurement. The driving force responsible for the LbL assembly was determined by investigating the formation behavior of the LbL assembly under various conditions. The formation of the LbL assembly was not affected either by the stereochemistry of polylysine and poly(lactic acid) or by the addition of urea, which is known to inhibit hydrogen bonding interaction between polymers, into the aqueous PLL solution. The LbL assembly was also formed by the combination of PDLA and polycations other than polylysine, such as poly(diallyldimethylammonium chloride). On the other hand, the combination of PDLA and any polyanions such as poly(styrene sulfonate sodium salt) produced little corresponding LbL assembly. The increase in positive charge on the amino nitrogen atom of PLL enhanced the LbL assembly. These results suggest that the LbL assembly film composed of PLL and PDLA was fabricated by cation-dipole interactions between the positive charge on the amino nitrogen atom of PLL and the lone pairs of the carbonyl oxygen atom of PDLA.     

A theoretical study of the dehydration and the dehydrogenation processes of alcohols on metal oxides using MOPAC

Using a semi-empirical molecular orbital method, PM3, and 2-propanol as an example, the dehydration and the dehydrogenation processes of alcohol on oxide catalysts were studied. The catalysts addressed here were four kinds of oxides (Al₂O₃, SiO₂, ZnO, CdO) whose reaction selectivities had been experimentally determined. The usual models consisting of a surface metal ion, several oxide ions and an isopropoxy group were used in calculations. For the dehydration, heats of formation of the models were calculated at each point of the process where the distance between a β-hydrogen of the group and a basic site (i.e. oxygen of the group or a surface oxide ion) or a metal ion was gradually shortened, or where the length of the C–O bond of the group was gradually increased. A reasonable dehydration mechanism was estimated by comparing activation energies calculated from the transitions of the heats of formation. The most probable dehydrogenation mechanism was also estimated in a similar way by gradually making an -hydrogen close to a surface oxide ion, the metal ion or a surface proton. It was concluded that the dehydration proceeds by scission of the C–O bond of the group after its oxygen was attacked by some electrophile on the surface and that the dehydrogenation proceeds by a mechanism in which an -hydrogen of the group was extracted by the metal ion.

Based on the dehydration mechanism thus deduced, alkoxy groups generated by adsorption of the primary, secondary and tertiary alcohols on SiO₂ were calculated in order to estimate the activation energies of their decompositions. In result, the order of the energies was found to be in good agreement with that of the decomposition rates experimentally determined by Kitahara. This agreement gives support to the validity of the mechanism deduced for the dehydration of alcohol.     

Accelerated electrocyclic ring-opening of benzocyclobutenes under the influence of a beta-silicon atom

A significant acceleration effect of a beta-silicon atom was observed on the electrocyclic ring-opening reaction of benzocyclobutene derivatives to form o-quinodimethanes. This acceleration effect could be attributed to an electronic sigma-donating nature of the C(alpha)-Si(beta) bond, associated with alpha-anion driven pericyclic reactions.     

Efficient approach to 1,2-diazepines via formal diazomethylene insertion into the C-C bond of cyclobutenones

Efficient monocyclic 1,2-diazepine formation via a tandem electrocyclization reaction of cyclobutenones with lithiodiazoacetate is demonstrated. The reaction proceeds through an oxy anion-accelerated 4π-ring opening of cyclobutene followed by an 8π-ring closure of the resultant oxy anion-substituted diazo-diene under mild conditions to furnish a 1,2-diazepine via formal diazomethylene insertion into the C-C bond of cyclobutenone.     

Copolymerization of optically active N-bornylmaleimide with vinyl monomers

Optically active N-bornylmaleimide (NBMI) was copolymerized with styrene, methyl methacrylate, and vinylidene chloride with a free-radical catalyst to obtain optically active copolymers. The monomer reactivity ratios for the radical copolymerization of NBMI (M₂) with styrene, methyl methacrylate, and vinylidene chloride were: ST-NBMI, r₁ = 0.13, r₂ = 0.05; MMA-NBMI, r₁ = 2.02, r₂ = 0.16; VCl₂-NBMI, r₁ = 1.15, r₂ = 0.47. The Q-e values for NBMI were Q₂ = 0.48 and e₂ = +1.47. The specific rotation and optical rotatory dispersion of these copolymers were measured. The correlation between the specific rotation and composition of these copolymers was not linear. The value of λ_c for each copolymer was independent of the copolymer composition and the comonomer, being 260 mμ for the St-NBMI system, 262 mμ for the MMA-system, and 260 mμ for the VCl₂-NBMI system. The effects of solvents and temperature on the specific rotation of these copolymers were investigated.     

Photodegradation of polyethylene in the presence of ferric salt: Influence of ferric acetylacetonate on model compounds

The influence of ferric acetylacetonate [Fe(acac)₃] on the photodegradation of model compounds of polyethylene (PE) was examined. By studying electron-spin-resonance (ESR) spectra of photoirradiated compounds such as 1-octene and 1,7-octadiene, which contain carbon double bonds, Fe(acac)₃ was found to accelerate the formation of allyl radical by contact with them. On the other hand, Fe(acac)₃ suppressed the radical formation based on Norrish type I reaction in a carbonyl group of compounds such as 2-octanone and 3-octanone. Based on the study of ultraviolet (UV) spectra as well as ESR spectra on photoirradiated samples, the influence of Fe(acac)₃ on the photodecomposition of model compounds of PE was discussed. Finally, the discussion turned to the mechanism of photodecomposition of PE in the presence of ferric salt.     

Optically active copolyamides by melt and solution condensation polymerization

The melt and solution condensation copolymerization of nylon salts which were prepared from d-camphoric acid and adipic acid with hexamethylenediamine were carried out, and optically active copolyamides were obtained. The copolyamides obtained had a positive specific rotation. The specific rotations for the copolyamides increased with increasing content of d-camphoryl units in the copolymers. The optical rotatory dispersion of the copolyamides had positive curves and were found to fit the simple Drude equation. The λ_c values of the polymers obtained by the melt and solution condensation polymerization were 241 mμ and 245 mμ, respectively.