High-throughput characterization of local conductivity of Nd0.9Ca0.1Ba2Cu3O7−δ thin film by the low-temperature scanning microwave microscope

We developed a scanning microwave microscope (SμM) designed for high-throughput electric-property screening as well as for rapid construction of electronic phase diagrams at low temperatures. As a sensor probe, we used a high-Qλ/4 coaxial cavity resonator to which a thin needle with ball-tip end was attached. The sensor module was mounted on the low-temperature XYZ stage, which allowed us to map out the change of resonance frequency and quality factor due to the local tip-sample interaction at low temperatures. From the measurements of combinatorial thin films, such as Ti_1−xCo_xO_2−δ and Nd_0.9Ca_0.1Ba₂Cu₃O_7−δ (NCBCO), it was demonstrated that this SμM system has enough performance for the high-throughput characterization of sample conductance under variable temperature conditions.     

Topological Landau-Ginzburg theory with a rational potential and the dispersionless KP hierarchy

Based on the dispersionless KP (dKP) theory, we study a topological Landau-Ginzburg (LG) theory characterized by a rational potential. Writing the dKP hierarchy in a general form treating all the primaries in an equal basis, we find that the hierarchy naturally includes the dispersionless (continuous) limit of Toda hierarchy and its generalizations having a finite number of primaries. Several flat solutions of the topological LG theory are obtained in this formulation, and are identified with those discussed by Dubrovin. We explicitly construct gravitational descendants for all the primary fields. Giving a residue formulae for the 3-point functions of the fields, we show that these 3-point functions satisfy the topological recursion relation. The string equation is obtained as the generalized hodograph solutions of the dKP hierarchy, which show that all the gravitational effects to the constitutive equations (2-point functions) can be renormalized into the coupling constants in the small phase space. Supported in part by NSF grant DMS-9403597.     

The effect of annealing on the proton conductivity of Mg-doped α-Al2O3

In order to evaluate the effect of annealing treatment on the proton conductivity of ??-alumina, the electrical conductivity of Mg-doped polycrystalline ??-alumina kept at 1,873?K under various conditions of the surrounding atmosphere and then cooled in the furnace was measured in the temperature range 1,173?C1,473?K. The H⁺/D⁺ isotope effect on the electrical conductivity was also examined under a hydrogen atmosphere at 1,273?K. The protonic conductivity measured at 1,273?K increased with the increase in the activity of oxygen and water vapor in the annealing atmosphere at 1,873?K. It is considered that the solubility limit of magnesium ions in ??-alumina in equilibrium with the small amount of the spinel phase increased with the increase in the activity of oxygen and water vapor at 1,873?K. This enhanced amount of magnesium ions is frozen in a non-equilibrium state to 1,273?K and works as the enriched acceptor dopant for the incorporation of protons.     

Inner invariant means and conjugation operators

It is shown that Paschke's result cannot be generalized to the [IN]-group setting given by Lau and Paterson. This resolves negatively a problem raised by Lau and Paterson.

     

High Efficiency Electrically-Addressable Phase-Only Spatial Light Modulator

To realize a high efficiency electrically addressable phase-only modulator, we have coupled a liquid crystal display (LCD) to an optically addressed parallel-aligned nematic liquid crystal spatial light modulator (PAL-SLM) with a set of lenses. Phase modulation exceeding 3ϖ at 532 nm wavelength was obtained. We obtained linear transfer characteristics for phase modulation at various desired phase levels after calibration and adjustment of the transfer characteristics of the PAL-SLM and the LCD. Diffraction efficiency of 40% for binary phase grating and of 90% for 8-level blazed phase grating, which were very close to the simulation values, were observed. The power loss of the readout light was caused when passed through a half mirror, therefore, we examined a setup using an oblique readout light at the modulator. Very high diffraction efficiency was obtained from the setup by optimizing the polarization direction and optical path for this light, and the orientation of liquid crystals. Since the modulator can perform at better than 90% diffraction efficiency and at nearly 100% reflectivity, various high efficiency systems utilizing such modulators are expected.     

Geometrical Form Factor Improvement for Receiving System of Infrared Lidar

Improvement of an infrared light detection and ranging (IR-lidar) system for a short range (0–1000 m) and with high resolution is studied to enhance a geometrical form factor. Theoretical modeling of Mie scattering echo signals agrees with the experimental results. Introduction of a lens in front of the detector is effective for increasing the geometrical form factor, and a significant improvement in the received signal intensity is achieved, especially for short-range measurements around 100 m. This is useful for the IR-lidar system with a detector diameter of less than 1 mm. In the theoretical model, a ray-tracing technique was applied and a transmitting laser beam with Gaussian profile was considered for better accuracy.     

An MRA study of vascular stenosis in a pig model using CH3-DTPA-Gd (NMS60) and Gd-DTPA

PURPOSE: This study used an experimental arterial stenosis model in pigs to evaluate the utility of a new medium-weight MRI contrast agent, NMS60 (a synthetic oligomeric Gd complex containing three Gd(3+) atoms, molecular weight of 2158 Da) compared to Gd-DTPA for contrast-enhanced MRA. MATERIALS AND METHODS: We used six male white hybrid pigs. Under anesthesia, one femoral artery was exposed and an inflatable cuff placed around it. The cuff was tightened around the vessel until 80-90% stenosis was achieved using digital subtraction angiography as a guide. Animals were then immediately transferred to the MRI scanner and images acquired pre- and postcontrast injection (0.1 or 0.2 mmol Gd/kg Gd-DTPA or NMS60, as a rapid bolus) using high-resolution and dynamic MRA. RESULTS: The dynamic MRA scans acquired during contrast bolus injection clearly showed the stenosed femoral artery as a segment of close to zero enhancement during the arterial phase of the bolus transit, while on the high-resolution scans the stenosis was difficult to detect due to venous signal contamination. The signal-to-noise at peak enhancement on the dynamic scans was significantly greater with 0.1 mmol Gd/kg NMS60 compared to 0.1 mmol Gd/kg Gd-DTPA (14.6 vs. 9.9, P < .05) and not significantly greater than 0.2 mmol Gd/kg (14.6 vs. 12.8). DISCUSSION AND CONCLUSION: This new medium-weight contrast agent demonstrated significantly greater enhancement than Gd-DTPA and may be valuable to aid detection of vascular stenosis in humans.     

Photocarrier injection and the I-V characteristics of La0.8Sr0.2MnO3/SrTiO3:Nb heterojunctions

Oxide heterojunctions made of p-type La_0.8Sr_0.2MnO₃ (LSMO) and niobium-doped n-type SrTiO₃ (STO:Nb) have been fabricated by the pulsed laser deposition (PLD) technique and characterized under UV light irradiation by measuring the current-voltage, photovoltaic properties and the junction capacitance. It is shown that the heterojunctions work as an efficient UV photodiode, in which photogenerated holes in the STO:Nb substrate are injected to the LSMO film. The maximum surface hole density Q/e and external quantum efficiency γ are estimated to be 8.3×10¹² cm⁻² and 11% at room temperature, respectively. They are improved significantly in a p-i-n junction of LSMO/STO/STO:Nb, where Q/e and γ are 3.0×10¹³ cm⁻² and 27%, respectively.     

Improved coating method for uniform polymer layer in infrared hollow fiber

An improved coating method was proposed in order to form a uniform polymer layer in the fabrication of cyclic olefin polymer-coated silver (COP/Ag) hollow fiber. A COP solution was flowed in a closed loop, in which the silver-coated tube was used as a part of the loop. Owing to the constant flowing speed of the COP solution and the airtight flowing environment, a COP layer was uniformly formed. The hollow fibers attain high performance and deliver multi-wavelength laser light from the infrared to the visible simultaneously. The method was successfully applied to the fabrication of practical hollow fibers with 2 m length for the near and mid-infrared lasers.