Blue laser lithography for making antireflective submicron structures on silicon

The application of blue laser lithography for creating antireflective submicron structures on a crystalline silicon substrate was evaluated. The assembled blue laser lithography system was obtained by modifying a commercial blue laser optical pickup head and consisting of a 405-nm-wavelength blue laser and a 0.85-numerical-aperture objective lens. Si substrates were patterned with submicron column patterns of various periods and aspect ratios by blue laser lithography using a sputtered Ge-Sb-Sn-O layer as a resist. The reflectance of the patterned Si substrate decreased to 3% on average in the 300–1000 nm wavelength range, with a low sensitivity to the angle of incident light. Such patterned substrates showed potential for application in crystalline Si solar cells.     

Synthesis, Structure and H+/K+-ATPase Inhibitory Activity of Novel Triazolyl Substituted Tetrahydrobenzofuran Derivatives via One-pot Three-component Click Reaction

Eleven triazolyl substituted tetrahydrobenzofuran derivatives were synthesized in high yields as novel H⁺/K⁺‐ATPase inhibitor via one‐pot CuI‐catalyzed three‐component click reaction of azide, secondary amine and 3‐bromopropyne under mild conditions in water. Their structures were characterized by NMR, IR, ESI‐MS, elemental analysis and single‐crystal X‐ray diffraction analysis. Most of the target compounds exhibited better H⁺/K⁺‐ATPase inhibitory activity than commercial omeprazole with IC₅₀ values less than 15 µmol·L^?1. The initial structure‐activity analysis suggested that the triazole substituted by cycloalkyl, aromatic ring or O‐containing side‐chain seemed to be beneficial for enhancing the activity.     

Enantioselective Organocatalytic Aza-Michael Additions of Phthalimide Derivatives to α,β-Unsaturated Aldehydes

Phthalimide derivatives as nitrogen nucleophiles with α,β‐unsaturated aldehydes for asymmetric aza‐Michael additions have been reported. The reactions proceed smoothly to afford corresponding Michael adducts in good yields (up to 98%) and enantioselectivities (up to 95% ee).     

Hierarchical nanostructured composite cathode with carbon nanotubes as conductive scaffold for lithium-sulfur batteries

Carbon nanotubes (CNTs) are excellent scaffolds for advanced electrode materials, resulting from their intrinsic sp2 carbon hybridization, interconnected electron pathway, large aspect ratio, hierarchical porous structures, and low cost at a large-scale production. How to make full utilization of the mass produced CNTs as building blocks for nanocomposite electrodes is not well understood yet. Herein, a composite cathode containing commercial agglomerated multi-walled CNTs and S for Li-S battery was fabricated by a facile melt-diffusion strategy. The hierarchical CNT@S coaxial nanocables exhibited a discharging capacity of 1020 and 740 mAh g-1 at 0.5 and 2.0 C, respectively. A rapid capacity decay of 0.7% per cycle at the initial 10 cycles and a slow decay rate of 0.14% per cycle for the later 140 cycles were detected. Such hierarchical agglomerated CNT@S cathodes show advantages in easy fabrication, environmentally benign, low cost, excellent scalability, and good Li ion storage performance, which are extraordinary composites for high performance Li-S battery.     

Size-refinement enhanced flexibility and electrochemical performance of MXene electrodes for flexible waterproof supercapacitors

Increasing mechanical flexibility without sacrificing electrochemical performance of the electrode mate-rial is highly desired in the design of flexible electro...     

Highly efficient oxidation of 2-imidazoline-5-carboxylic derivatives to imidazole-5-carboxylic derivatives by dioxygen

A highly efficient and environmental-benign oxidation by dioxygen (or air) as the sole oxidant was first applied for the conversion of 2-imidazoline-5-carboxylic derivatives to imidazole-5-carboxylic derivatives in very good and excellent yields. The substituent effect on 2-imidazoline ring was investigated. This protocol was also suitable for the synthesis of 2-imidazoles in relatively large scale.     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.     

DSC study of stabilizing effect of antioxidant mixtures in styrene-butadiene rubber

The type of cooperation between antioxidants in the binary mixtures of four substituted diphenylamines and phenotiazine in the stabilization of styrene-butadiene rubber has been tested. Thermooxidation of the samples has been studied by differential scanning calorimetry under non-isothermal conditions. The protection factors of the individual stabilizers and their mixtures were determined. The synergy factors were applied to asses the type of cooperation of antioxidants in the mixtures. From their values it can be concluded that the type of cooperation depends on temperature. The highest synergistic effect has been observed for the mixture of phenotiazine and [4-(1-methyl-1-phenyl-ethyl)-phenyl]-phenylamine.     

Numerical simulation for the temperature changing rule of the crude oil in a storage tank based on the wavelet finite element method

In order to study the temperature changing rule of the crude oil in the storage tank, the wavelet finite element method, the traditional finite element method and the test were used to carry out the numerical simulation. Firstly, the thermal wavelet finite element was put forward established based on thermal finite element theory and the wavelet theory. And the computational model and three boundary conditions were established. And then the temperature changing rule of the crude oil in the storage tank in 24 h for three boundary conditions was obtained by using three methods, and the results showed that the wavelet finite element method had advantages in the numerical analysis of the temperature changing rule of the crude oil in the storage. And then the temperature distribution rule of the crude oil in the storage tank under different conditions in 5 h was obtained. And the temperature changing mechanism of the crude oil was summarized finally.