Ionic/electronic conductivity regulation of n-type polyoxadiazole lithium sulfonate conductive polymer binders for high-performance silicon microparticle anodes

Low-cost silicon microparticles(SiMP),as a substitute for nanostructured silicon,easily suffer from cracks and fractured during the electrochemical cycle.A novel n-type conductive polymer binder with excellent electronic and ionic conductivities as well as good adhesion,has been successfully designed and applied for high-performance SiMP anodes in lithium-ion batteries to address this problem.Its unique features are attributed to the stro ng electron-withdrawing oxadiazole ring structure with sulfonate polar groups.The combination of rigid and flexible components in the polymer ensures its good mechanical strength and ductility,which is beneficial to suppress the expansion and contraction of SiMP s during the charge/discharge process.By fine-tuning the monomer ratio,the conjugation and sulfonation degrees of the polymer can be precisely controlled to regulate its ionic and electronic conductivities,which has been systematically analyzed with the help of an electrochemical test method,filling in the gap on the conductivity measurement of the polymer in the doping state.The experimental results indicate that the cell with the developed n-type polymer binder and SiMP(~0.5 μm) anodes achieves much better cycling performance than traditional non-conductive binders.It has been considered that the initial capacity of the SiMP anode is controlled by the synergetic effect of ionic and electronic conductivity of the binder,and the capacity retention mainly depends on its electronic conductivity when the ionic conductivity is sufficient.It is worth noting that the fundamental research of this wo rk is also applicable to other battery systems using conductive polymers in order to achieve high energy density,broadening their practical applications.     

Enhanced conversion of α-cellulose to 5-HMF in aqueous biphasic system catalyzed by FeCl_3-CuCl_2

This study was to investigate the optimal additions of the cellulose decomposition reaction to obtain the most yield of 5-HMF and other furan derivatives in various biphasic systems with FeCl_3-CuCl_2 mixed catalysts,and explore its depolymerization kinetics.A series of controllable reactions have been performed under mild environmentally friendly atmosphere.The experiment results showed that49.13 wt% of 5-HMF was the maximum production along with 2.98 wt% other furan derivatives catalyzed by mixed Lewis acid FeCl_3-CuCl_2 under the two phases which included high concentration NaCl aqueous phase and n-butanol organic phase at 190℃ for 45 min.The conclusion suggested that two-phase systems benefited the yield of 5-HMF,furan derivatives via extracting the target products from reaction phase to organic phase to avoid rehydration of 5-HMF.The kinetic calculation revealed the conversion with mixed catalysts had lower reaction apparent activation energy(21.65 kJ/mol,190-230℃) and the reaction rate was faster than that with acid-based catalysts.Based on experiment exploration,the probable mechanism of cellulose decomposition with FeCl_3-CuCl_2 was proposed.     

An Electron Paramagnetic Resonance Study of the Orbital Ordering Compound MgTi<Subscript>2</Subscript>O<Subscript>4</Subscript>

We report the electron paramagnetic resonance (EPR) studies of MgTi₂O₄ in the 300–140 K range. Above the transition temperature T _t (~258 K), the EPR results indicate that MgTi₂O₄ is paramagnetic. The parameters of the EPR spectra show an anomalous change at T _t. The clear EPR lines can be observed in temperature between T _t and 220 K. Besides that the EPR intensity, g value, and EPR linewidth increase with decreasing temperature; in temperature range below 220 K, no clear EPR line can be detected. The EPR spectra results demonstrate that magnetic spin-singlet state and the orbital density wave of MgTi₂O₄ system are formed gradually with decreasing temperature at low temperature range.     

A Novel L‐Cysteine Electrochemical Sensor Using Sulfonated Graphene‐poly(3,4‐Ethylenedioxythiophene) Composite Film Decorated with Gold Nanoparticles

By exploiting the electrostatic interaction between positively charged 3,4‐ethylenedioxythiophene cation radicals and negatively charged sulfonated graphene (SG) sheets, we prepared a poly(3,4‐ethylenedioxythiophene)‐sulfonated graphene (SG‐PEDOT) composite film by a one‐step electrochemical process. The composite was further decorated with gold nanoparticles (AuNPs) and employed as an electrode material for the detection of L ‐cysteine (Cys). The SG‐PEDOT composite film is shown to provide a rough surface for the electrodeposition of AuNPs and to improve substrate accessibility and interaction with Cys. Moreover, the AuNPs‐decorated composite exhibits better electrocatalytic performance than that of a SG‐PEDOT composite only. Under optimum experimental conditions, the amperometric current of the sensor is linearly related to the concentration of Cys in the 0.1 to 382 µM range, and the detection limit is 0.02 µM (at S/N=3). The modified electrode displays favorable selectivity, good stability and high reproducibility. The method was successfully applied to the detection of Cys in spiked human urine.     

Peptide Dimethylation: Fragmentation Control via Distancing the Dimethylamino Group

Direct reductive methylation of peptides is a common method for quantitative proteomics. It is an active derivatization technique; with participation of the dimethylamino group, the derivatized peptides preferentially release intense a₁ ions. The advantageous generation of a₁ ions for quantitative proteomic profiling, however, is not desirable for targeted proteomic quantitation using multiple reaction monitoring mass spectrometry; this mass spectrometric method prefers the derivatizing group to stay with the intact peptide ions and multiple fragments as passive mass tags. This work investigated collisional fragmentation of peptides whose amine groups were derivatized with five linear ω-dimethylamino acids, from 2-(dimethylamino)-acetic acid to 6-(dimethylamino)-hexanoic acid. Tandem mass spectra of the derivatized tryptic peptides revealed different preferential breakdown pathways. Together with energy resolved mass spectrometry, it was found that shutting down the active participation of the terminal dimethylamino group in fragmentation of derivatized peptides is possible. However, it took a separation of five methylene groups between the terminal dimethylamino group and the amide formed upon peptide derivatization. For the first time, the gas-phase fragmentation of peptides derivatized with linear ω-dimethylamino acids of systematically increasing alkyl chain lengths is reported. Figure

?     

Metal‐Free Aminosulfonylation of Aryldiazonium Tetrafluoroborates with DABCO⋅(SO2)2 and Hydrazines

The coupling of aryldiazonium tetrafluoroborates, DABCO?(SO₂)₂, and hydrazines under metal‐free conditions leads to the formation of aryl N‐aminosulfonamides. The reaction proceeds smoothly at room temperature and shows broad functional‐group tolerance. A radical process is proposed for this transformation.     

Sequence-Dependent DNA Functionalization of Upconversion Nanoparticles and Their Programmable Assemblies

DNA-modified lanthanide-doped upconversion nanoparticles (DNA-UCNPs) that combine the functions of DNA and the optical features of UCNPs have shown great promise in a wide range of fields. However, challenges remain in precisely tethering and orienting the DNA strands on the UCNP surface. Herein, we systematically investigate the sequence dependence of DNAs in their interactions with UCNPs, and reveal that poly-cytosine (poly-C) has high affinity for the UCNP surface. A general approach to synthesize monodispersed DNA-UCNP conjugates is developed using poly-C-containing diblock DNA strands. The poly-C segment of the DNA strand binds to the surfaces of UCNPs and the second segment is oriented perpendicularly on the UCNP surface, making the DNA-UCNPs highly stable and monodispersed in aqueous solution. The dense layer of DNA on the UCNP surface enables the programmable assembly of UCNPs with other DNA-functionalized nanoparticles or DNA origamis through hybridization, resulting in the formation of well-organized complex structures.     

An E1-Catalyzed Chemoenzymatic Strategy to Isopeptide-N-Ethylated Deubiquitylase-Resistant Ubiquitin Probes

Triazole-based deubiquitylase (DUB)-resistant ubiquitin (Ub) probes have recently emerged as effective tools for the discovery of Ub chain-specific interactors in proteomic studies, but their structural diversity is limited. A new family of DUB-resistant Ub probes is reported based on isopeptide-N-ethylated dimeric or polymeric Ub chains, which can be efficiently prepared by a one-pot, ubiquitin-activating enzyme (E1)-catalyzed condensation reaction of recombinant Ub precursors to give various homotypic and even branched Ub probes at multi-milligram scale. Proteomic studies using label-free quantitative (LFQ) MS indicated that the isopeptide-N-ethylated Ub probes may complement the triazole-based probes in the study of Ub interactome. Our study highlights the utility of modern protein synthetic chemistry to develop structurally and new families of tool molecules needed for proteomic studies.     

Tailoring A Poly(ether sulfone) Bipolar Membrane: Osmotic-Energy Generator with High Power Density

Osmotic energy, obtained through different concentrations of salt solutions, is recognized as a form of a sustainable energy source. In the past years, membranes derived from asymmetric aromatic compounds have attracted attention because of their low cost and high performance in osmotic energy conversion. The membrane formation process, charging state, functional groups, membrane thickness, and the ion-exchange capacity of the membrane could affect the power generation performance. Among asymmetric membranes, a bipolar membrane could largely promote the ion transport. Here, two polymers with the same poly(ether sulfone) main chain but opposite charges were synthesized to prepare bipolar membranes by a nonsolvent-induced phase separation (NIPS) and spin-coating (SC) method. The maximum power density of the bipolar membrane reaches about 6.2 W m⁻² under a 50-fold salinity gradient, and this result can serve as a reference for the design of bipolar membranes for osmotic energy conversion systems.     

ACQ-to-AIE Transformation: Tuning Molecular Packing by Regioisomerization for Two-Photon NIR Bioimaging

The traditional design strategies for highly bright solid-state luminescent materials rely on weakening the intermolecular π–π interactions, which may limit diversity when developing new materials. Herein, we propose a strategy of tuning the molecular packing mode by regioisomerization to regulate the solid-state fluorescence. TBP-e-TPA with a molecular rotor in the end position of a planar core adopts a long-range cofacial packing mode, which in the solid state is almost non-emissive. By shifting molecular rotors to the bay position, the resultant TBP-b-TPA possesses a discrete cross packing mode, giving a quantum yield of 15.6±0.2 %. These results demonstrate the relationship between the solid-state fluorescence efficiency and the molecule's packing mode. Thanks to the good photophysical properties, TBP-b-TPA nanoparticles were used for two-photon deep brain imaging. This molecular design philosophy provides a new way of designing highly bright solid-state fluorophores.