Eigenspace-based minimum variance beamformer combined with Wiener postfilter for medical ultrasound imaging

In this paper, a new beamformer which combines the eigenspace-based minimum variance (ESBMV) beamformer with the Wiener postfilter is proposed for medical ultrasound imaging. The primary goal of this work is to further improve the medical ultrasound imaging quality on the basis of the ESBMV beamformer. In this method, we optimize the ESBMV weights with a Wiener postfilter. With the optimization of the Wiener postfilter, the output power of the new beamformer becomes closer to the actual signal power at the imaging point than the ESBMV beamformer. Different from the ordinary Wiener postfilter, the output signal and noise power needed in calculating the Wiener postfilter are estimated respectively by the orthogonal signal subspace and noise subspace constructed from the eigenstructure of the sample covariance matrix.We demonstrate the performance of the new beamformer when resolving point scatterers and cyst phantom using both simulated data and experimental data and compare it with the delay-and-sum (DAS), the minimum variance (MV) and the ESBMV beamformer. We use the full width at half maximum (FWHM) and the peak-side-lobe level (PSL) to quantify the performance of imaging resolution and the contrast ratio (CR) to quantify the performance of imaging contrast. The FWHM of the new beamformer is only 15%, 50% and 50% of those of the DAS, MV and ESBMV beamformer, while the PSL is 127.2 dB, 115 dB and 60 dB lower. What is more, an improvement of 239.8%, 232.5% and 32.9% in CR using simulated data and an improvement of 814%, 1410.7% and 86.7% in CR using experimental data are achieved compared to the DAS, MV and ESBMV beamformer respectively. In addition, the effect of the sound speed error is investigated by artificially overestimating the speed used in calculating the propagation delay and the results show that the new beamformer provides better robustness against the sound speed errors. Therefore, the proposed beamformer offers a better performance than the DAS, MV and ESBMV beamformer, showing its potential in medical ultrasound imaging.     

Polymerizable Molecular Silsesquioxane Cage Armored Hybrid Microcapsules with In Situ Shell Functionalization

We prepared core–shell polymer–silsesquioxane hybrid microcapsules from cage‐like methacryloxypropyl silsesquioxanes (CMSQs) and styrene (St). The presence of CMSQ can moderately reduce the interfacial tension between St and water and help to emulsify the monomer prior to polymerization. Dynamic light scattering (DLS) and TEM analysis demonstrated that uniform core–shell latex particles were achieved. The polymer latex particles were subsequently transformed into well‐defined hollow nanospheres by removing the polystyrene (PS) core with 1:1 ethanol/cyclohexane. High‐resolution TEM and nitrogen adsorption–desorption analysis showed that the final nanospheres possessed hollow cavities and had porous shells; the pore size was approximately 2–3 nm. The nanospheres exhibited large surface areas (up to 486 m² g^?1) and preferential adsorption, and they demonstrated the highest reported methylene blue adsorption capacity (95.1 mg g^?1). Moreover, the uniform distribution of the methacryloyl moiety on the hollow nanospheres endowed them with more potential properties. These results could provide a new benchmark for preparing hollow microspheres by a facile one‐step template‐free method for various applications.     

Excellent electrochemical performance of nitrogen-enriched hierarchical porous carbon electrodes prepared using nano-CaCO3 as template

Recently, tremendous research efforts have been concentrated on developing high-performance electrode materials to meet the ever-increasing energy and power demands in supercapacitors. Herein, we presented a high-capacity supercapacitor material based on nitrogen-enriched hierarchical porous carbons (NHPCs) synthesized by the carbonization of melamine formaldehyde resins using eco-friendly and inexpensive nano-CaCO₃ as template. The effects of carbonization temperature and template content on the porous structure and electrochemical characteristics were compared and discussed in detail. The prepared NHPCs possessed large surface area up to 834 m² g^?1 and high nitrogen content up to 20.94 wt %. As electrode material for supercapacitors, NHPCs exhibited superior electrochemical performances with high specific capacitance (190 F g^?1 at 20 A g^?1), outstanding rate capability (80 %), and excellent cycling stability (over 2,000 cycles at 5 A g^?1) in 1 M sulfuric acid media. The excellent electrochemical performances are due to the synergic effects of unique hierarchical porous microstructure, abundant nitrogen and oxygen functionalities, as well as high degree of graphitization framework.     

Asymmetric Synthesis of Novel Axially Chiral 2,2'-Bipyridine N,N'-Dioxides Bearing α-Amino Acid Residues and Their Applications in Enantioselective Allylation of Aromatic Aldehydes with Allyltrichlorosilane

A series of novel axially chiral 2,2′‐bipyridine N,N′‐dioxides bearing C₁ or C₂‐symmetry have been synthesized by the use of enantiopure α‐amino acids as chiral sources. The absolute stereochemistry of the axial chirality of these organocatalysts has been clearly assigned by means of CD measurements together with literature protocols. The reactivities and enantioselectivities of these organocatalysts have been examined in the reactions of aromatic aldehydes with allyltrichlorosilane, thus providing the desired products with moderate yields and enantioselectivies.     

Promotion effect of adsorbed water/OH on the catalytic performance of Ag/activated carbon catalysts for CO preferential oxidation in excess H2

Activated carbon (AC) supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation (PROX) in excess H₂ was evaluated. Ag/AC catalysts, after reduction in H₂ at low temperatures (≤200 °C) following heat treatment in He at 200 °C (He200H200), exhibited the best catalytic properties. Temperature-programmed desorption (TPD), X-ray diffraction (XRD) and temperature-programmed reduction (TPR) results indicated that silver oxides were produced during heat treatment in He at 200 °C which were reduced to metal silver nanoparticles in H₂ at low temperatures (≤200 °C), simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 °C. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H₂00 treatment displayed similar PROX of CO reaction properties to Ag/SiO₂. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst.     

Morphology-controlled electrochemical sensing amaranth at nanomolar levels using alumina

Different-shaped aluminas were readily prepared via hydrothermal reaction. It was found that the morphology and the electrochemical sensing properties of alumina were heavily dependent on the reaction time. When extending the reaction time from 6 h to 24 h, the obtained alumina samples changed from amorphous bumps to regular microfibers in diameter of 200 nm, as confirmed by scanning electron microscopy. Transmission electron microscopy observation revealed that longer reaction time was beneficial for the formation of porous and uniform fiber-like structures. Electrochemical tests proved that alumina microfibers were more active for the oxidation of amaranth and exhibited much higher enhancement effect, compared with alumina bumps. On the surface of alumina microfibers, the oxidation peak currents of amaranth increased remarkably. The influences of pH value, amount of alumina microfibers, and accumulation time on the signal enhancement of amaranth were discussed. As a result, a novel electrochemical method was developed for the detection of amaranth. The linear range was from 1 to 150 nM, and the detection limit was 0.75 nM after 1-min accumulation. The analytical application in drink samples was investigated, and the results consisted with the values that obtained by high-performance liquid chromatography.     

Experimental Evidence for Ion Accumulation Time Affecting Qualitative and Quantitative Analysis of Ophiopogons in Ophiopogon Extract by Hybrid Ion Trap Time-of-Flight Mass Spectrometry

The qualitative and quantitative capability of the ion trap mass analyzer could be greatly affected by the accumulation time. However, the importance of the accumulation time has not so far been thoroughly explored. Here, the influence of ion accumulation time on qualitative and quantitative analysis of complicated components was systematically investigated based on the case study of 40 ophiopogonins in Ophiopogon extract by hybrid ion trap time-of-flight mass spectrometry (LCMS-IT-TOF). In this process, the accumulation time was set at 10, 25, 50, 100, and 200 ms, respectively. The effect of accumulation time on qualitative analysis of ophiopogonins was studied by comparing the total ion current (TIC) of MS¹, TIC of MS², and the number and signal of fragmental ions. The results demonstrated that the signal could be greatly influenced by varying the accumulation time. The number and signal of the fragmental ions were increased significantly with a longer accumulation time in the range of 10–100 ms. Also, the effect of accumulation time on quantitative analysis of ophiopogonins was investigated by comparing the linearity, accuracy, and precision measured on LCMS-IT-TOF. Importantly, quantitative parameters could all be significantly improved by choosing an appropriate accumulation time.

     

Total Synthesis of α-Elvucitabine

Total synthesis of α-elvucitabine was achieved in 26% overall yield by a concise nine-step procedure starting from L-lyxose, with trimethylsilyl trifluoromethaneoulfonate (TMSOTf)–mediated stereocontrolled α-N-glycosidation and olefination through Barton–McCombie deoxygenation being the key steps, and the stereochemistry of the product was determined by nuclear Overhauser effect spectroscopy.     

单壁碳纳米管对C-C键水解酶BphD的固定化性能

采用修饰与未修饰单壁碳纳米管固定C-C键水解酶BphD,并对固定化酶的相对活性、稳定性、重复使用性进行了考察.结果表明,未修饰单壁碳纳米管固定的BphD相对活性为游离态的52.5%,其热稳定性和在变性剂中的稳定性均有所提高,且重复使用10次仍可保持初始活力的90%.修饰单壁碳纳米管固定的BphD相对活性可达99.7%,但其稳定性没有明显提高.同源模建及分子对接分析结果显示,未修饰的单壁碳纳米管对BphD亚基之间的联系可能存在干扰作用,从而对其活性产生影响.