Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Quantitative analysis of multiple urinary biomarkers of carcinoid tumors through gold-nanoparticle-assisted laser desorption/ionization time-of-flight mass spectrometry

A highly selective and sensitive coumarin-based chemodosimeter 1 for Cu(2+) in water is reported in this work. 1 was designed and facilely synthesized by a one-step reaction with coumarin as a fluorophore and 2-picolinic acid as the binding moiety, which showed very week fluorescence in buffer solution, and its fluorescence was considerably enhanced by the addition of Cu(2+) at room temperature in 5 min. Mechanism study suggested that Cu(2+) promoted the hydrolysis of 1 via the catalytic sensing cycle, generating a highly fluorescent product 7-hydroxycoumarin with fluorescence signal greatly amplified. The probe exhibited remarkably selective fluorescence enhancement to Cu(2+) over other metal ions at 454 nm, with a detection limit of 35 nM Cu(2+). Under optimal condition, 1 was successfully used for the determination of Cu(2+) in fetal equine serum and two water samples.     

Quantitative analysis of multiple urinary biomarkers of carcinoid tumors through gold-nanoparticle-assisted laser desorption/ionization time-of-flight mass spectrometry

A simple technique for quantitative analysis of four urinary biomarkers, tryptophan (TRP), 5-hydroxytryptophan (5-HTP), 5-hydroxytryptamine (5-HT) and 5-hydroxyindole acetic acid (5-HIAA) of carcinoid tumors is developed using gold nanoparticles as the assisted matrix in surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI–TOF MS). The optimal SALDI conditions for the efficient ionization of those biomarkers are systematically explored by the adjustments of the concentrations of gold nanoparticles and internal standards. The mass spectra with strong signals and minimal background noise are obtained using 1-naphthaleneacetamide (NAD) as the internal standard. The calibration curves of the biomarker concentrations are determined using SALDI–TOF MS and the high linearity is obtained in all samples. For future clinical testing, multiplexed detection of those biomarkers in the urine samples of healthy males is performed. The successful quantitative detections of TRP, 5-HTP, 5-HT and 5-HIAA indicate that our technique provided great potentials to be developed a simple and rapid platform for the tumor biomarker detections.     

Asymmetric Three‐Component Heck Arylation/Amination of Nonconjugated Cyclodienes

Substituted cyclohexylamines are becoming increasingly important in drug discovery. Asymmetric Heck insertion/amination of nonconjugated cyclodienes proceeds to give 5‐aryl cyclohexenylamines with good enantioselectivity and exclusive trans configurations. Primary and secondary anilines, indoline, and benzylamines are suitable amines. The weakly donating diphosphite Kelliphite forms a deep unsymmetrical pocket, which is essential for stereoselective anti attack of amines.     

In situ preparation of high relaxivity iron oxide nanoparticles by coating with chitosan: A potential MRI contrast agent useful for cell tracking

Iron oxide nanocrystals are of considerable interest in nanoscience and nanotechnology because of their nanoscale dimensions, nontoxic nature, and superior magnetic properties. Colloidal solutions of magnetic nanoparticles (ferrofluids) with a high magnetite content are highly desirable for most molecular imaging applications. In this paper, we present a method for in situ coating of superparamagnetic iron oxide (SPIO) with chitosan in order to increase the content of magnetite. Iron chloride salts (Fe³⁺ and Fe²⁺) were directly coprecipitated inside a porous matrix of chitosan by Co-60 γ-ray irradiation in an aqueous solution of acetic acid. Following sonication, iron oxide nanoparticles were formed inside the chitosan matrix at a pH value of 9.5 and a temperature of 50 °C. The [Fe³⁺]:[Fe²⁺]:[NH₄OH] molar ratio was 1.6:1:15.8. The final ferrofluid was formed with a pH adjustment to approximately 2.0/3.0, alongside with the addition of mannitol and lactic acid. We subsequently characterized the particle size, the zeta potential, the iron concentration, the magnetic contrast, and the cellular uptake of our ferrofluid. Results showed a z-average diameter of 87.2 nm, a polydispersity index (PDI) of 0.251, a zeta potential of 47.9 mV, and an iron concentration of 10.4 mg Fe/mL. The MRI parameters included an R1 value of 22.0 mM⁻¹ s⁻¹, an R2 value of 202.6 mM⁻¹ s⁻¹, and a R2/R1 ratio of 9.2. An uptake of the ferrofluid by mouse macrophages was observed. Altogether, our data show that Co-60 γ-ray radiation on solid chitosan may improve chitosan coating of iron oxide nanoparticles and tackle its aqueous solubility at pH 7. Additionally, our methodology allowed to obtain a ferrofluid with a higher content of magnetite and a fairly unimodal distribution of monodisperse clusters. Finally, MRI and cell experiments demonstrated the potential usefulness of this product as a potential MRI contrast agent that might be used for cell tracking.     

Determination of total mercury and methylmercury in human hair by graphite-furnace atomic absorption spectrophotometry using 2,3-dimercaptopropane-1-sulfonate as a complexing agent.

For the determination of total mercury in hair, an amount (25.0 mg) of hair sample was digested with conc. HNO3 (400 microl) at 90 degrees C for 10 min in a 7-ml teflon microreaction vessel. After digestion, the pH of the acidic hair mixture was adjusted to 5.0-6.0 by NaOH and was then passed through a clean-up Sep-Pak C18 cartridge. To the eluate, 2,3-dimercaptopropane-1-sulfonate (DMPS) and sodium acetate buffer (pH = 6.0) were added to form a mercury-DMPS complex. This complex was preconcentrated on two Sep-Pak C18 cartridges in series, and each cartridge was eluted with methanol and adjusted to 2.00 ml. A portion (50 microl) was introduced into a graphite cuvette and then atomized according to a temperature program. The method detection limit (MDL, 3sigma) was 0.064 (microg g(-1)); the calibration graph was linear up to 7.52 microg g(-1). Good accuracies were obtained when testing two human hair certified reference materials (GBW 09101 and BCR-397). Six real samples were analyzed, and the recoveries were 95.8 - 98.2% with a relative standard deviation (RSD, n = 3) < 2.1%. For the determination of methylmercury (CH3Hg+), 25.0 mg of hair sample was extracted with 2.0 mol dm(-3) HCl (1.0 ml) by ultrasonicating for 1 h. The supernatant solution was used for CH3Hg+ analysis and the hair residue was used for the analysis of inorganic mercury (Hg2+). The MDL of CH3Hg+ was 0.068 microg g(-1); the calibration graph was linear up to 6.00 microg g(-1). Six real samples were analyzed, and the recoveries were 96.0-99.2% with RSD (n = 3) < 2.3%. The sum of the concentrations of CH3Hg+ and Hg2+ was very close to that of the total mercury measured with a relative error within 3.6%. The proposed method can be accurately applied to the measurement of CH3Hg+, Hg2+, and total mercury in hair samples.     

Toward efficient catalysts for electrochemical CO2 conversion to C2 products

With impressive progress in carbon capture and renewable energy, carbon dioxide (CO₂) conversion into useful chemicals has become a potential tool against climate change. Electrochemical CO₂ conversion into C₂ products (ethylene and ethanol) is an especially economically promising approach and an active research area. Nonetheless, catalyst layer design for CO₂ conversion is challenging because of the complex CO₂-to-C₂ reaction pathways. In this review, we highlight key ideas in catalyst layer design for CO₂ conversion to C₂ in the past few years. We identify three fundamental principles to control catalyst selectivity—local CO₂ and CO concentration, local pH, and intermediate–catalyst interaction. To achieve these goals, we introduce design strategies for both catalytic materials and overall catalyst layer morphology.     

Secondary Metabolites from the Fruiting Bodies of Coriolopsis aspera in Vietnam and their Bioactivities

Chemistry of Natural Compounds -     

Saccharpiscinols A–C: Flavans with Potential Anti-Inflammatory Activities from One Actinobacteria Saccharomonospora piscinae

Phytochemical investigation and chromatographic separation of extracts from the actinobacteria strain Saccharomonospora piscinae that was isolated from dried fishpond sediment of Kouhu township, in the south of Taiwan, led to the isolation of three new compounds, saccharpiscinols A–C (1–3, respectively), and three new natural products, namely (2S)-5,7,3′,4′-tetrahydroxy-6,8-dimethylflavanone (4), methyl-4-hydroxy-2-methoxy-6-methylbenzoate (5), and (±)-7-acetyl-4,8-dihydroxy-6-methyl-1-tetralone (6). Compounds 4–6 were reported before as synthesized products, herein, they are reported from nature for the first time. The structures of the new compounds were unambiguously elucidated on the basis of extensive spectroscopic data analysis (1D- and 2D-NMR, MS, and UV) and comparison with literature data. The effect of some isolates on the inhibition of NO production in lipopolysaccharide-activated RAW 264.7 murine macrophages was evaluated. Saccharpiscinol A showed inhibitory activities against LPS-induced NO production.     

Secondary Metabolites with Antimycobacterial Activities from One Actinobacteria: Herbidospora yilanensis

The cultivation of one actinobacteria strain, Herbidospora yilanensis, was isolated from sediment samples collected from Yilan County City in Taiwan, resulting in the isolation of five previously undescribed compounds: herbidosporayilanensins A–E (1–5), and four compounds isolated from nature for the first time: herbidosporayilanensins F–I (6–9). Their structures were elucidated by spectroscopic analyses, including 1D- and 2D-NMR experiments with those of known analogues, and on the basis of HR-EI-MS mass spectrometry, their antimycobacterial activities were also evaluated.