席夫碱钼(Ⅵ)配合物的制备及催化大豆油环氧化

以水杨醛和邻氨基酚为起始原料, 合成了N-亚水杨醛基-2-氨基苯酚配体(H₂SAP); H₂SAP与乙酰丙酮钼的无水乙醇溶液反应, 制得席夫碱钼(Ⅵ)配合物MoO₂(SAP)(EtOH); 采用元素分析、红外光谱、紫外光谱、¹H NMR及热重分析对配合物进行了表征. 以MoO₂(SAP)(EtOH)为催化剂, 研究了其催化合成环氧大豆油的催化性能, 考察了氧源种类、反应温度、反应时间及溶剂/助剂等因素对环氧化反应的影响. 结果表明, 以65%(质量分数)叔丁基过氧化氢(65% TBHP)为氧源, 在80℃时反应4 h, 转化率和选择性分别为43.0%和67.2%, MoO₂(SAP)(EtOH)在催化体系中表现出强烈的助剂效应, 当加入强给电子配体咪唑时, 环氧产率显著降低. 同时对该配合物催化环氧化机理进行了初步探讨.     

高次谐波辐射发射特性研究

报告由不同脉冲宽度(半高宽,FWHM)和不同载波-包络相位(CEP,Φ)的激光产生的高次谐波辐射能量输出时间特性即发射特性的研究结果. 计算表明,由宽度为几个周期的激光产生的高次谐波辐射的截止能量明显低于由无限长脉冲宽度激光产生的截止能量ω_max=3.17U_p+I_p(其中ω_max为光子角频率,U_p和I_p分别为激光有质动力势和原子的电离能). 例如,由两周期(FWHM),Φ＝15°的激光产生的高次谐波辐射的截止能量为ω_max=2.90U_p+I_p,此时发射特性单脉冲(即分布单脉冲)具有最大的能量带宽0.86U_p. 脉冲中心位置的载波相位和时间宽度分别为0.94rad(弧度)和1.29rad. 而该激光脉冲在Φ＝-75°时能产生截止能量为ω_max=2.70U_p+I_p,最大能量带宽为0.70U_p的双分布脉冲,其中心位置分别为-0.58rad和2.43rad,宽度分别为1.22rad和1.33rad. 随着激光脉冲宽度的增加,分布单脉冲的能量带宽比时间宽度下降得更快. 对于一定宽度的激光脉冲,所产生的分布单脉冲的能量带宽和时间宽度的CEP依赖性显示出180°的周期结构. 利用这个有趣的特点,在实验上可以通过调节CEP来选择分布脉冲的能量参数,也可用来定位和控制阿秒脉冲的时间参数. 理论分析指出,只要选择合适的阿秒X射线能量带宽,CEP不稳定性对于光电子谱和测量结果的影响将大为降低,甚至在最大程度上消除这种影响. 这些研究结果不仅有助于在物理上深入了解高次谐波辐射的动力学过程,而且对于进一步在实验上优化和选择阿秒单脉冲和双脉冲具有重要的参考和指导意义. 关键词： 高次谐波产生 鞍点方法 谐波发射特性 分布脉冲     

Cu掺杂的AlN铁磁性和光学性质的第一性原理研究

采用基于密度泛函理论（DFT）的总体能量平面波超软赝势方法,结合广义梯度近似（GGA）,对Cu掺杂AlN 32原子超原胞体系进行了几何结构优化,计算了Cu掺杂AlN的晶格常数,能带结构,电子态密度和光学性质.结果表明,Cu掺杂AlN会产生自旋极化状态,能带结构显示半金属性质,掺杂后带隙变窄,长波吸收加强,能量损失明显减小.同传统的稀磁半导体（DMS）相比,Cu掺杂AlN不会有铁磁性沉淀物的问题,因为Cu本身不具有磁性.因而,Cu掺杂的AlN也许是一种非常有前途的稀磁半导体. 关键词： AlN 第一性原理 铁磁性 光学性质     

Temperature dependent responsivity of quantum dot infrared photodetectors

Temperature dependent behavior of the responsivity of InAs/GaAs quantum dot infrared photodetectors was investigated with detailed measurement of the current gain. The current gain varied about two orders of magnitude with 100 K temperature change. Meanwhile, the change in quantum efficiency is within a factor of 10. The dramatic change of the current gain is explained by the repulsive coulomb potential of the extra carriers in the QDs. With the measured current gain, the extra carrier number in QDs was calculated. More than one electron per QD could be captured as the dark current increases at 150 K. The extra electrons in the QDs elevated the Fermi level and changed the quantum efficiency of the QDIPs. The temperature dependence of the responsivity was qualitatively explained with the extra electrons.     

Polycarbonate nanoparticles spray coated on silicon substrate using micro-electromechanical-systems-based high-frequency ultrasonic nozzle

Mono-disperse polycarbonate (PC) nanoparticles 20 nm in diameter was spray coated on silicon substrate using a novel high-frequency ultrasonic nozzle. Specifically, Bisphenol-A polycarbonate with a molecular weight (M_w) of approximately 6.4 × 10⁴ g/mol was first dissolved in pyridine. The resulting solution was sprayed into surfactant-containing de-ionized (DI) water using a 300 kHz silicon-based multiple-Fourier horn nozzle (MFHN). As pyridine was extracted into the water, PC nanoparticles formed but remained dispersed. This suspension of PC nanoparticles was then sprayed onto a silicon substrate using a 500 kHz 3-Fourier horn nozzle. Scanning electron microscopy (SEM) of the dried substrate revealed that PC nanoparticles were spread uniformly with no aggregation.     

Gas chromatographic analysis of the thermally unstable dimethyl methylphosphonate carbanion via trimethylsilyl derivatization

An HPLC method to quantitate phytometallophores (phytosiderophores) exuded from roots of barley (Hordeum vulgare L.) growing in nutrient solution culture was developed. 9-Fluorenylmethyl chloroformate (FMOC) derivatives of phytometallophores were separated on a C18 reverse-phase column using a sodium acetate (pH 7.2) and acetonitrile-methanol gradient over 20 min followed by fluorescence detection. Detection limits ranged from 15 to 370 pmol depending on the particular phytometallophore. The effectiveness of this method was demonstrated using the response of barley seedlings to Fe-sufficient and Fe-deficient nutrient solution conditions. Phytometallophores collected in root washings of Fe-deficient barley seedlings increased with plant age while phytometallophore release from Fe-adequate roots was negligible.     

Spectrophotometric determination of deacetylation degree of chitinous materials dissolved in phosphoric acid

A simple spectrophotometric method is proposed for determining deacetylation degrees (DD) of chitinous materials using phosphoric acid as the UV-transparent solvent system. Calibrating by the extinction coefficients (A(210)) of D-glucosamine and N-acetyl-D-glucosamine, DD values (24-88%) were computed numerically. The results correlated well (R(2) = 0.9805, n = 50) with those obtained by solid-state (13)C NMR. Comparison of the results obtained by the proposed UV method and solid-state (13)C NMR.     

SECRAL等离子体韧致辐射谱的测量

The axial emitted bremsstrahlung spectra were measured on SECRAL(Superconducting ECR ion source with Advanced design in Lanzhou)using an HPGe detector.The spectral temperature T_(spe) was obtained from the linear fit of the spectra in the semi-log present.The evolution of T_(spe) with microwave power and magnetic field configuration is investigated in this paper.     

Electrochemical Deposition and Properties of ZnTe Nanowire Array

Pulsed electrodeposited technique is applied to fabricate ZnTe nanowire arrays with different diameters into the anodic alumina membrane in citric acid solution. The x-ray powder diffraction, scanning electron microscopy and transmission electron microscopy indicate that the high ordered, uniform and single-crystalline nanowires have been fabricated. The optical absorption spectra of the nanowire array show that the optical absorption band edge of the ZnTe nanowire array exhibit a blue shift compared with that of bulk ZnTe, and the nonlinear current-voltage characteristic is observed.