Evaporation of water droplets on polymer surfaces

The evaporation of water droplets on polymer surfaces was investigated by using a digital image analysis technique. There were three distinct stages in the water evaporation process: a constant contact area mode, a constant contact angle mode, and a mixed mode that is independent of both the initial quantity of water droplets and the hydrophobic properties of the polymer surfaces. The physical factors influencing the first and second transitions in the evaporation process were found to be the attainment of the receding angle on the polymer surfaces and the Marangoni instability in the evaporating water droplets, which result from the concentration gradient of contaminants. This study also provides qualitative information about the microfluid flows inside the evaporating water droplets and the morphology of drying stains on polymer surfaces. The contaminants were found to be concentrated at the perimeter of the stains, in agreement with the observed outward microfluid flow in the mixed mode of the evaporation process.     

Ratiometric determination of Hg2+ ions based on simple molecular motifs of pyrene and dioxaoctanediamide

A new podand-type dioxaoctanediamide-based chemosensor having two pyrene moieties was prepared, and its fluoroionophoric behaviors toward transition-metal ions were investigated. Pyrene-appended dioxaoctanediamide 1 showed a selective fluorescence quenching toward Hg2+ ions over other transition-metal ions in an aqueous methanol solution. Unique responses in pyrene monomer and excimer emissions allowed selective ratiometric determination of Hg2+ ions in aqueous environments, and the detection limit was found to be 1.6 x 10(-6) M. [structure: see text]     

Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.     

Stimulated Raman scattering measurements of H2 vibration–vibration transfer

We present a new set of V–V rate coefficients for vibrational levels 0–5 in H₂ at 300 K, measured using a stimulated Raman–spontaneous Raman pump/probe apparatus. The measured rate of the non-resonant process, H₂(v = 1) + H₂(v = 1) → H₂(v = 0) + H₂(v = 2), is consistent with the previously reported experimental value of Kreutz et al. However, semi-classical predictions of such non-resonant processes, using the identical inter-molecular potential and methodology to that given by Cacciatore and Billing, results in rates which are too slow, by a factor of approximately 3. For the “resonant” V–V process, H₂(v = 1) + H₂(v = 0) → H₂(v = 0) + H₂(v = 1), the semi-classical rate is found to be too slow by an even larger factor, of approximately 30, compared to the experimental rate, but consistent with the previously reported experimental result of Farrow and Chandler. Further, unlike the semi-classical model prediction in which the (1, 1 → 2, 0) process rate is predicted to exceed that of the (1, 0 → 0, 1) process, the experimental data shows it to be a factor of approximately 2.5 less, suggesting that semi-classical methods that treat the rotational motion classically are unsuitable for the highly anharmonic H₂ molecule. The ratio of pure rotation and rotation–vibration Raman cross sections for scattering from levels 0 and 1 is also determined, with results which agree with calculations of Schwartz and LeRoy, but are somewhat larger than previous experimental results of Cureton.     

Obesity and genetic polymorphism of ERCC2 and ERCC4 as modifiers of risk of breast cancer

To evaluate the relationship of genetic polymorphisms of ERCC2 and ERCC4 genes, both involved in nucleotide excision repair (NER), and the risk of breast cancer, a hospital-based case-control study was conducted in Korea. Histologically confirmed breast cancer cases (n = 574) and controls (n = 502) with no present or previous history of cancer were recruited from three teaching hospitals in Seoul during 1995-2001. Information on selected characteristics was collected by interviewed questionnaire. ERCC2 Asp(312)Asn (G>A) was genotyped by single-base extension assay and ERCC4 Ser(835)Ser (T>C) by dynamic allele-specific hybridization system. Although no significant association was observed between the genetic polymorphisms and the risk of breast cancer, women with both ERCC2 A allele- and ERCC4 C allele-containing genotypes showed a 2.6-fold risk (95% CI: 1.02-6.48) of breast cancer compared to women concurrently carrying the ERCC2 GG and ERCC4 TT genotypes. The breast cancer risk increased as the number of "at risk" genotypes increased with a borderline significance (P for trend = 0.07). Interactive effect was also observed between ERCC4 genotype and body mass idnex (BMI) for the breast cancer risk; the ERCC4 C allele containing genotypes posed a 1.7-fold (95% CI: 0.96-2.93) breast cancer risk in obese women (BMI>25 kg/m(2)) with a borderline significance. Our finding suggests that the combined effect of ERCC2 Asp(312)Asn and ERCC4 Ser(835)Ser genotypes might be associated with breast cancer risk in Korean women.     

Enthalpic effect of polyacrylonitrile on the concentrated solutions in dimethyl sulfoxide: Strong thixotropic behavior and formation of bound solvents

The effect of dipole–dipole interaction by nitrile groups of PAN on the bound state of solvent molecules and the concentrated solution properties in DMSO was investigated. Variation of a solution viscosity exhibited three overlap concentrations, C1*, C2*, and C3*, at 2.7, 8.6, and 16.3 wt%, respectively, representing the transition of concentration regions in the order of dilute, unentangled‐semi dilute, entangled‐semi dilute, and concentrated regions. The two‐dimensional mapping of FT‐IR analysis and dielectric measurement confirmed that the intermolecular interaction of PAN was suddenly enhanced at the C*s, inducing polarization to DMSO. In the ice‐melting process of PAN solutions, two different melting peaks (T_m2 and T_m3) of DMSO newly appeared at each C2* and C3*, suggesting the different types of bound solvents. In the concentrated solutions, the saturated dielectric constant and the strongly delayed evaporation of the solvent even at the boiling point of DMSO along with strong thixotropic behavior were indicative of the stronger confinement state of bound DMSO than in the semidilute solutions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1080–1089     

Effect of conformational heterogeneity on excitation energy transfer efficiency in directly meso-meso linked Zn(II) porphyrin arrays

We have investigated the overall excitation energy relaxation dynamics in linear porphyrin arrays as well as the energy transport phenomena by attaching an energy acceptor to one end of a linear porphyrin array by using steady state and time-resolved spectroscopic measurements. We have revealed that the solvation dynamics as well as the conformational dynamics contributes significantly to the energy relaxation processes of linear porphyrin arrays. Consequently, long porphyrin arrays no longer serve as good energy transmission elements in donor-acceptor linked systems due to conformational heterogeneities which provide the non-radiative deactivation channels as energy quenchers.     

A serpentine laminating micromixer combining splitting/recombination and advection

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.     

Unprecedented control over polymerization of n-hexyl isocyanate using an anionic initiator having synchronized function of chain-end protection

The living anionic polymerization of isocyanates carried out using conventional initiators is associated with side reactions due to rapid initiation rates as well as back-biting by the growing chain, resulting in a lack of control on the molecular weight (MW) and molecular weight distribution (MWD) of the polymers. Successful control over the reaction was possible by using additives that could prevent back-biting. We find an initiator in sodium benzanilide (Na-BA), which has a slow initiation rate combined with additive function, so that use of an external additive is eliminated. The initiator has resulted in polymers with high yields and an unprecedented control over the MW and MWD. It is possible to introduce a number of functionalities at the termini of the polymer by using Na-BA derivatives as well as suitable terminating agents, leading to macromonomer, reactive and chiral polymers, and chiral macromonomer in approximately 100% yields. In the process, the finding has expanded the scope of polyisocyanates in diverse applications.