Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Catalytic wet air oxidation of oleic acid on ceria-supported platinum catalyst.effect of pH

Summary Catalytic wet air oxidation (CWAO) of oleic acid was carried out in a batch reactor on platinum supported ceria catalyst (Pt/CeO₂). Oleic acid is a water insoluble linear unsaturated fatty acid of 18 carbon atoms. To increase the homogeneity of the solution by saponification, the influence of NaOH additions in oleic acid CWAO mechanism and catalyst performances have been investigated. The oxidation of such molecule occurs by two types of mechanisms: successive carboxy-decarboxylation which leads essentially to CO₂and/or C-C bonds splitting in the alkyl chain inducing a high formation of acetic acid. With or without NaOH, the 5%Pt/CeO₂catalyst is active in the conversion of oleic acid and selective to carbon dioxide. In alkaline medium, oleic acid is initially saponified which increases the solubility of the reactant before it to be oxidized. Finally the oxidation is slightly delayed by the presence of NaOH. The catalyst characterizations show no significant difference before and after reaction.</o:p>     

On the mechanism of reorientational and structural relaxation in supercooled liquids: the role of border dynamics and cooperativity

Molecular dynamics simulation and analysis based upon the many-body potential energy landscape (PEL) are employed to characterize single molecule reorientation and structural relaxation, and their interrelation, in deeply supercooled liquid CS(2). The rotational mechanism changes from small-step Debye diffusion to sudden large angle reorientation (SLAR) as the temperature falls below the mode-coupling temperature T(c). The onset of SLAR is explained in terms of the PEL; it is an essential feature of low-T rotational dynamics, along with the related phenomena of dynamic heterogeneity and the bifurcation of slow and fast relaxation processes. A long trajectory in which the system is initially trapped in a low energy local minimum, and eventually escapes, is followed in detail, both on the PEL and in real space. During the trapped period, "return" dynamics occurs, always leading back to the trap. Structural relaxation is identified with irreversible escape to a new trap. These processes lead to weak and strong SLAR, respectively; strong SLAR is a clear signal of structural relaxation. Return dynamics involves small groups of two to four molecules, while a string-like structure composed of all the active groups participates in the escape. It is proposed that, rather than simple, nearly instantaneous, one-dimensional barrier crossings, relaxation involves activation of the system to the complex, multidimensional region on the borders of the basins of attraction of the minima for an extended period.     

Fourth-derivative spectrophotometric determination of fungicide ferbam (iron(III) dimethyldithiocarbamate) in a commercial sample and wheat grains using 2,2′-bipyridyl

A procedure has been developed for the direct fourth-derivative spectrophotometric determination of iron(III) dimethyldithiocarbamate by converting it into an iron(II) 2,2'-bipyridyl complex, which is then dissolved in Triton X-100. Beer's law is obeyed over the concentration range 0.5-20 microg mL(-1 )in the final solution. Various parameters such as the effect of pH and interference of large number of ions on the determination of ferbam have been studied in detail. The method is sensitive, highly selective and can be used for the determination of ferbam in a commercial sample and in mixtures with various dithiocarbamates (ziram, zineb, maneb, etc.) and from wheat grains.     

Formation of nanostructured polymer filaments in nanochannels

We describe the use of hard etching methods to create nanodimensional channels and their use as templates for the formation of polymer filament arrays with precise dimensional and orientational control in a single integrated step. The procedure is general as illustrated by the radical, coordination, and photochemical polymerizations that were performed in these nanochannels. The nanochannel templates (20 nm high, 20-200 nm wide, and 100 mum long) were fabricated by the combined use of electron-beam lithography and a sacrificial metal line etching technique. Radical polymerization of acrylates, metal-catalyzed polymerization of norbornene, and photochemical polymerization of 1,4-diiodothiophene were carried out in these nanochannels. The polymers grown follow the dimensions and orientation of the channels, and the polymer filaments can be released without breaking. The approach opens up the possibility of just-in-place manufacturing and processing of patterns and devices from nanostructured polymers using well-established polymer chemistry.     

A convenient preparative method for anionic tris(substituted pyrazolyl)methane ligands

The synthesis of tris[3-(6-carboxypyridin-2-yl)pyrazol-1-yl]methane is described in a linear multi-step protocol. The pyridyl-pyrazolyl arms are first constructed before being condensed with chloroform. Careful study of the condensation reaction shows the presence of an isomeric form of the tris(pyrazolyl)methane derivative in which one of the pyrazolyl substituents is linked through the nitrogen atom at the 2 position of the pyrazol. After acid-catalysed isomerisation to the desired isomer, the intermediate compound was subjected to a carboalkoxylation reaction and a subsequent hydrolysis. These are some rare examples of reactions directly occurring on the tris(pyrazolyl)methane platforms.     

Prevulcanisation of skim latex: morphology and its use in natural rubber based composite material

The prevulcanisation of skim latex, a by-product of field natural rubber (NR) latex concentrated by centrifugation, using sulphur and peroxide systems was investigated. Compared to the peroxide prevulcanisation, the lower swelling ratio of film casted from sulphur-prevulcanised skim (SPVS) latex was observed. The latter was then employed for preparation of NR/SPVS core–shell particles by using heterocoagulation technique whose driving force was an interpolymer complex between poly(ethylene oxide) (PEO) moieties of a non-ionic surfactant (Nonidet) adsorbed on small SPVS particles and the indigenous surfactant (protein–lipid) on a large NR particle. The value of zeta potential of heterocoagulated particle and the better oil resistance of films casted from the composite latex when compared to that of the NR film revealed the NR/SPVS core–shell structure.     

Total synthesis of 3,3′:4′,3″-ter-1,2,5-thiadiazole using a synthetic utility of S4N4·SbCl5 complex

3,3′:4′,3″-Ter-1,2,5-thiadiazole, an useful oligoheterocyclic compound, has been accomplished in seven steps from 1-(5-methyl-3-isoxazolyl)ethanone or diethyl acetylenedicarboxylate using a synthetic utility of tetrasulfur tetranitride antimony pentachloride (S₄N₄·SbCl₅) complex to make a 1,2,5-thiadiazole ring.