Preparation of ZSM‐5 Coated on Monolithic Interconnected Macroporous Al2O3 Using Cheap n‐Butylamine as Template

Using cheap n‐butylamine as template, ZSM‐5 zeolites have been successfully synthesized and coated on monolithic interconnected macroporous Al₂O₃ by the secondary growth method. The use of cheap n‐butylamine could significantly reduce the synthesis cost. Hierarchical monolithic ZSM‐5 zeolites were prepared from synthetic mixtures with different H₂O/Na₂O or SiO₂/Al₂O₃ ratio. The synthesized samples were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR) and N₂ adsorption‐desorption. The results show that the hierarchical monolithic zeolites were obtained with cheap n‐butylamine template as template. During the hydrothermal reaction process, the morphology of the micrometer‐sized support was well maintained. The irregular crystals were formed in a wide range of the H₂O/Na₂O or SiO₂/Al₂O₃ ratio of synthetic mixtures and coated on monolithic Al₂O₃. The relative crystallinity of the zeolites was highest at H₂O/Na₂O=250 or SiO₂/Al₂O₃=160. This type of composites exhibited hierarchical porous structures and relatively high specific surface areas.     

Deoxygenation of methyl laurate to hydrocarbons on silica-supported Ni-Mo phosphides: Effect of calcination temperatures of precursor

SiO2-supported Ni-Mo bimetallic phosphides were prepared by temperature-programmed reduction(TPR) method from the phosphate precursors calcined at different temperatures. Their properties were characterized by means of ultraviolet-visible diffuse reflectance spectroscopy(UV-Vis DRS), H2temperature-programmed reduction(H2-TPR), X-ray diffraction(XRD), transmission electron microscopy(TEM), CO chemisorption, H2 and NH3temperature-programmed desorptions(H2-TPD and NH3-TPD). Their catalytic performances for the deoxygenation of methyl laurate were tested in a fixed-bed reactor. When the precursors were calcined at 400 and 500?C, respectively, Ni Mo P2 phase could be formed apart from Ni2 P and Mo P phases in the prepared C400 and C500 catalysts. However, when the precursors were calcined at600, 700 and 800°C, respectively, only Ni2 P and Mo P phases could be detected in the prepared C600, C700 and C800 catalysts. Also, in C400, C500 and C600 catalysts, Mo atoms were found to be entered in the lattice of Ni2 P phase, but the entering extent became less with the increase of calcination temperature. As the calcination temperature of the precursor increased, the interaction between Ni and Mo in the prepared catalysts decreased, and the phosphide crystallite size tended to increase, subsequently leading to the decrease in the surface metal site density and the acid amount. C600 catalyst showed the highest activity among the tested ones for the deoxygenation of methyl laurate. As the calcination temperature of the precursor increased, the selectivity to C12 hydrocarbons decreased while the selectivity to C11 hydrocarbons tended to increase. This can be mainly attributed to the decreased Ni-Mo interaction and the increased phosphide particle size. In sum, the structure and performance of Ni-Mo bimetallic phosphide catalyst can be tuned by the calcination temperature of precursor.     

Facile synthesis of 1-naphthols through a copper-catalyzed arylation of methyl ketones with o-bromoacetophenones

The coupling reactions of simple methyl ketones with o-bromoacetophenones and subsquential cyclization reactions were realized to produce a range of 1-naphthols. These cascade reactions were initiated by a rare Cu-catalyzed arylation reaction of methyl ketones with aromatic bromides.     

Assessment of intermolecular N–H…F and N–H…Cl hydrogen bonding in stabilising hetero- and homodimers in solution

This paper describes the first assessment of intermolecular weak N–H…F and N–H…Cl hydrogen bonding in stabilising hetero- and homodimers in solution. Aromatic amide and urea monomers have been designed and synthesised. The association constants of the heterodimers formed by two complementary monomers and the homodimers formed by self-complementary monomers have been determined by using ¹H titration and dilution experiments. The results show that both N–H…F and N–H…Cl hydrogen bonds are able to stabilise the corresponding dimers to a measurable extent, even though the stability of the dimers is generally low.     

Preparation of Lewis acid ionic liquids for one-pot synthesis of benzofuranol from pyrocatechol and 3-chloro-2-methylpropene

Several Lewis acid ionic liquids (LAILs) with different acidic scales were synthesised and used as catalysts for the synthesis of benzofuranol by condensation of pyrocatechol and 3-chloro-2-methylpropene in one pot. The catalytic activity of these ionic liquids was correlated with their Lewis acidity. Low to moderate conversion with excellent selectivity to benzofuranol was obtained in the presence of the appropriate LAILs. Compared to the two-step synthetic method currently used in industry, a higher yield plateau (81.1%) of benzofuranol was achieved in the presence of [BMIm][AlCl₄] IL as catalyst at 418 K after 4 h. Furthermore, the catalyst is readily separated from the resultant products via decantation and could be reused after treatment in vacuum.