Ultraviolet derivatization of steroidal saponin in garlic and commercial garlic products as p-nitrobenzoate for liquid chromatographic determination

A method is described for determination of the steroidal saponin, eruboside B, originating in garlic and garlic products as the p-nitrobenzoyl chloride (PNBC) derivative by reversed-phase liquid chromatography (with ultraviolet detection at 260 nm. Proto-eruboside B was extracted from garlic (Allium sativum L.); subjected to solid-phase extraction (SPE) with a C18 cartridge, Florisil column chromatography, and silica gel column chromatography; and then enzymatically converted to eruboside B, which was applied as an external standard. Steroidal saponins in garlic and commercial garlic products were extracted with methanol and purified by SPE cartridges, followed by enzymatic treatment. A frostanol saponin such as proto-eruboside B is enzymatically transformed to a spirostanol saponin, eruboside B. After the derivatization with PNBC, the saponin derivative was chromatographed on a C8 column with a gradient elution of (A) 80% aqueous acetonitrile and (B) 100% acetonitrile. The detection limit of the developed method was 1 microg/g for the samples. The method was applied to the analysis of garlic and garlic health food products available in Japan.     

SEC–MALLS analysis of cellulose using LiCl/1,3-dimethyl-2-imidazolidinone as an eluent

The lithium chloride/1,3-dimethyl-2-imidazolidinone (LiCl/DMI) solvent system for cellulose was adopted as a mobile phase of size-exclusion chromatographic (SEC) analysis of cellulose, and the applicability of this system was examined using multi-angle laser light scattering and ¹³C-NMR analysis. The results indicate that 8% (w/v) LiCl/DMI ID a true solvent for cellulose, and that cellulose molecules dissolving ID 1% (w/v) LiCl/DMI are separated orderly depending on their molecular mass (MM) or root-mean-square (RMS) radius by the SEC system. Practically, no aggregates were detected ID the dilute cellulose/LiCl/DMI solutions. Furthermore, high stability of cellulose/LiCl/DMI solutions has been demonstrated; only a few percent of decline ID average MM was observed even after storage for 6 months at room temperature. Relationships between RMS radius and MM for hardwood bleached kraft pulp ID 1% LiCl/DMI was estimated as the following equation: _g^0.59, corresponding to a Mark–Houwink–Sakurada exponent of 0.77.     

MO Study of the photochemical behavior of the imine bond

The photoisomerization of imine compounds is studied in terms of an ab initio MO CI calculation. The potential curves of the syn-anti isomerization via the rotation and the inversion are examined for benzaldimine. It is suggested that the photoisomerization is initiated through the rotation around the C? N bond in both singlet and triplet states. The ease of the photoisomerization is found to be determined by both the conformation of phenyl ring in the ground state and the energy difference of vertically excited states between two isomers.     

A modified method using static head-space gas chromatography for determining the stability constants of 1-alkanol/alpha-cyclodextrin complexation

A modification of the conventional static head-space gas chromatography method (SHSGC method) to determine stability constants for 1-alkanol/alpha-CD inclusion complexes was investigated. The 1 : 1 stability constants determined by this modified SHSGC method are in reasonable agreement with the corresponding values reported previously. The modified SHSGC method precludes the necessity of the calibration curve by the use of Henry's law constant of guest. Consequently, the modified SHSGC method is more advantageous than the conventional SHSGC method because the experimental time required for determination of the stability constant is markedly reduced.     

Enantioface-selective palladium-catalyzed silaboration of allenes via double asymmetric induction

Enantioenriched beta-borylallylsilanes were synthesized by palladium-catalyzed enantioface-selective addition of the silicon-boron bond to terminal allenes using a palladium catalyst possessing a chiral monodentate phosphine ligand. Use of a silylborane bearing a chiral auxiliary on the boron atom was beneficial to gain enantioface selectivities as high as 96% de.     

Dehydrogenation versus oxygenation in two-electron and four-electron reduction of dioxygen by 9-alkyl-10-methyl-9,10-dihydroacridines catalyzed by monomeric cobalt porphyrins and cofacial dicobalt porphyrins in the presence of perchloric acid

Dehydrogenation of 10-methyl-9,10-dihydroacridine (AcrH(2)) by dioxygen (O(2)) proceeds efficiently, accompanied by the two-electron and four-electron reduction of O(2) to produce H(2)O(2) and H(2)O, which are effectively catalyzed by monomeric cobalt porphyrins and cofacial dicobalt porphyrins in the presence of perchloric acid (HClO(4)) in acetonitrile (MeCN) and benzonitrile (PhCN), respectively. The cobalt porphyrin catalyzed two-electron reduction of O(2) also occurs efficiently by 9-alkyl-10-methyl-9,10-dihydroacridines (AcrHR; R = Me, Et, and CH(2)COOEt) to yield 9-alkyl-10-methylacridinium ion (AcrR+) and H(2)O(2). In the case of R = Bu(t) and CMe(2)COOMe, however, the catalytic two-electron and four-electron reduction of O(2) by AcrHR results in oxygenation of the alkyl group of AcrHR rather than dehydrogenation to yield 10-methylacridinium ion (AcrH+) and the oxygenated products of the alkyl groups, i.e., the corresponding hydroperoxides (ROOH) and the alcohol (ROH), respectively. The catalytic mechanisms of the dehydrogenation vs the oxygenation of AcrHR in the two-electron and four-electron reduction of O(2), catalyzed by monomeric cobalt porphyrins and cofacial dicobalt porphyrins, respectively, are discussed in relation to the C(9)-H or C(9)-C bond cleavage of AcrHR radical cations produced in the electron-transfer oxidation of AcrHR.     

Regioselective synthesis and biological activity of oxidized chitosan derivatives

Oxidized chitosan derivatives with various degrees of oxidation (DS, 0.1–1.0) were prepared by the treatment of chitosan with CrO₃/aq HClO₄ or by the oxidation of ­3‐O‐ and N‐protected chitosan with 30% aq H₂O₂/Na₂WO₄ followed by 3‐O‐ and N‐deprotection. The oxidized products were then N‐acetylated with Ac₂O in order to improve their water‐solubility. Although the oxidized chitosan derivative of DS 0.28 and the degree of N‐acetylation of chitosan (DA) 38% was insoluble in the pH 3–8 region, that of DS 0.26 and DA 76% was soluble in the neutral pH range. The newly‐prepared acetylated and oxidized chitosan derivatives were found to suppress the chemiluminescence response of inflammatory cells such as canine polymorphonuclear cells (PMNs). Analysis by the surface plasmon resonance method revealed that the bind and release behavior of PMNs to acetylated oxidized chitosan derivatives was similar to that against carboxymethylated chitosan derivatives. The amount of water‐soluble chitosan derivative bound to cytokine IL‐8 was found to be affected by the structural and electronic features of the chitosan substituents in the chitosan chain. Copyright © 2003 John Wiley & Sons, Ltd.     

Rapid and simultaneous analysis of dichlorvos, malathion, carbaryl, and 2,4-dichlorophenoxy acetic acid in citrus fruit by flow-injection ion spray ionization tandem mass spectrometry

A simple method for the rapid and simultaneous analysis of dichlorvos (DDVP), malathion, carbaryl, and 2,4-dichlorophenoxy acetic acid (2,4-D) in citrus fruit, which uses flow-injection ion spray ionization tandem mass spectrometry, has been developed for the first time. The method involves the combined use of stable isotopically labeled internal standards (DDVP-d₆, malathion-d₁₀, carbaryl-d₇, and 2,4-D-d₅) and a multiple reaction monitoring technique. The average recoveries for the pesticides at the same concentrations as their tolerance levels (DDVP: 0.1-0.2 μg g⁻¹; malathion: 0.5-4.0 μg g⁻¹; carbaryl: 1.0 μg g⁻¹; 2,4-D: 1.0-2.0 μg g⁻¹) ranged from 90 to 119% with the relative standard deviation (R.S.D.) ranging from 1.0 to 13.1% (n = 5). Analysis time, including sample preparation and determination, was only 15 min. The present method is effective for screening DDVP, malathion, carbaryl, and 2,4-D in citrus fruit.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at     

Synthesis and properties of thermoplastic propyl-etherified amylose

Amylose was etherified with 1-bromopropane in DMSO. The degree of substitution (DS) was varied by altering the feed ratio of 1-bromopropane. The structures of the products were characterized by IR and 1H-NMR spectroscopy. When the molar feed ratio of 1-bromopropane to hydroxyl groups of amylose was beyond 7.5, the hydroxyl groups were completely substituted with propyl ether groups. The etherified amylose with DS 1.9 showed a glass transition temperature (T_g), and that with DS 2.3 or 3.0 showed both T_g and melting temperature (T_m) (DS 3.0 means complete substitution). The etherification imparted melt processability and solubility in nonpolar organic solvent to amylose.