Spectroscopic and theoretical studies of optically active porphyrin dimers: a system uninterpretable by exciton coupling theory.

The electronic excited states of a meso-meso beta-beta doubly linked bis-porphyrin are comprehensively investigated by measuring its circular dichroism (CD) and magnetic circular dichroism (MCD) spectra. The observed spectroscopic properties are rationalized by DFT calculations. The frontier molecular orbitals (MOs) are constructed by the linear combinations of the constituent monomers' four MOs. Comparison of a theoretical CD spectrum based on time-dependent DFT (TDDFT) with the experimental spectra resulted in the assignment of the helical conformation of the dimer. This assignment is contrary to the previous assignment based on the point-dipole approximation (exciton coupling theory).     

Three dimensional gain analysis of free electron laser with focusing permanent magnet wiggler

A three dimensional simulation software system developed to estimate a free electron laser (FEL) gain has been applied to FEL using a standard plane polarized wiggler and an alternately shifted magnet wiggler. It is seen for the latter wiggler that a large filling factor could be selected and each maximum gain corresponding to each orbit of electron beam concentrates at a certain frequency region of FEL radiation. It is, therefore, implied that a proper shift between the adjacent magnets in the wiggler produces the improvement of the FEL gain.     

On global stability of an HIV pathogenesis model with cure rate

In this paper, applying both Lyapunov function techniques and monotone iterative techniques, we establish new sufficient conditions under which the infected equilibrium of an HIV pathogenesis model with cure rate is globally asymptotically stable. By giving an explicit expression for eventual lower bound of the concentration of susceptible CD4⁺ T cells, we establish an affirmative partial answer to the numerical simulations investigated in the recent paper [Liu, Wang, Hu and Ma, Global stability of an HIV pathogenesis model with cure rate, Nonlinear Analysis RWA (2011) 12 : 2947–2961]. Our monotone iterative techniques are applicable for the small and large growth rate in logistic functions for the proliferation rate of healthy and infected CD4⁺ T cells. Copyright © 2014 John Wiley & Sons, Ltd.     

Visualization of space charge field effect on excitons in a GaAs quantum dot by near-field optical wavefunction mapping

Near-field photoluminescence (PL) imaging spectroscopy was used to investigate multi-exciton and charged-exciton states confined in a single GaAs interface fluctuation quantum dot. We determined the origin of peaks in the PL spectra by employing a wavefunction mapping technique. We observed distortion of the exciton wavefunction due to the electric field produced by an excess electron at a nearby confined state. Near-field wavefunction mapping was demonstrated to be a powerful tool for visualizing the local environment, which affects the emission properties of quantum dots.     

Control of thermoresponsivity of biocompatible poly(trimethylene carbonate) with direct introduction of oligo(ethylene glycol) under various circumstances

Poly(trimethylene carbonate) (PTMC) is a well‐known biodegradable polymer with good biocompatible properties which make it suitable for biomedical applications. Poly(5‐[2‐{2‐(2‐methoxyethoxy)ethyoxy}‐ethoxymethyl]‐5‐methyl‐1,3‐dioxa‐2‐one) (PTMC‐MOE3OM) and copolymers, bearing oligo ethylene glycol (OEG) at the side chain of PTMC backbone, were selected to investigate the cloud point behavior by solvents such as PBS, water, 10% ethanol solution and various ionic strengths. A pH‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐(5‐methyl‐5‐carboxylic‐1,3‐dioxane‐2‐one)) as carboxylic acid carbonate showed a decreased critical temperature at pH 2. Photo‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐coumarin derivatives) bearing 1% and 10% of photo‐induced molecules (7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)]‐methoxy coumarin (TMCM‐coumarin)) exhibited a low cloud point because of the hydrophobic moieties. Meanwhile, alternative coumarin polymer including 2% of 4‐methyl‐7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)butoxy)]‐methoxy coumarin (TMCM‐4‐methyl‐coumarin) has been successfully synthesized and copolymerized as a novel molecule. The various combinations of monomers were studied and the significant properties were determined via external triggers after copolymerization. This study showed basically synthetic progress toward designs and trivial rationalization of thermoresponsive copolymers close to body temperature. At present, various pendant groups as side part affect to the lower critical solution temperature (LCST) and biodegradable polymer in order to utilize the actual external stimuli application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3466–3474     

Precise synthesis of a series of poly(4‐n‐alkylstyrene)s and their glass transition temperatures

Poly(4‐n‐alkylstyrene)s with six kinds of n‐alkyl groups such as methyl, ethyl, propyl, butyl, hexyl, and octyl groups covering wide molecular weight range from around 5 k to over 100 k were precisely synthesized by living anionic polymerizations. It was confirmed that all the polymers obtained have narrow molecular weight distribution, that is, M_w/M_n is all less than 1.1, by SEC. T_gs of all the polymers were estimated by DSC measurements and it turned out to be clear that their molecular weight dependence was well described by the Fox–Flory equations. Furthermore, it is evident that T_g monotonically decreases as a number of carbon atoms of n‐alkyl group is increased, though T_g values are all 20 K or more higher than those reported previously for the same polymer series. This is because backbone mobility increases by introducing longer n‐alkyl side groups with high mobility, while T_g difference in between this work and the previous one may due to the experimental conditions and also to the molecular weight range adopted. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 757–763     

The effect of viscoelasticity on the extrusion drawing in film-casting process

The governing rheological property for extrusion drawing in film-casting process is proposed in this study. The experiment of film-casting process using the high-pressure process low-density polyethylene (LDPE) was performed. The non-isothermal viscoelastic simulation of the film casting experiment was also carried out to explain the experimental results. Film width reduction phenomenon in an air gap, so-called neck-in behavior, was investigated by using the simulation of the LDPE and the model fluids exhibiting specific viscoelasticity. The neck-in phenomenon was also examined using theoretical model based on force balance and deformation type of a film. As a result, the neck-in normalized by the air gap was in good correlation with the ratio of planar to uniaxial elongational viscosity rather than the strain hardening nature of uniaxial elongational viscosity.     

Synthesis of polydithiourethanes and their thermal,optical, and mechanical properties originated from monomers structure

Polyaddition of various diisothiocyanates and dithiols was achieved with triethylamine in dimethylformamide at 25 °C for 12 h under nitrogen, and then the corresponding polydithiourethanes (PDTUs) were obtained with high yield and molecular weight without depending on the monomer structures, although the dithiol monomer of the low nucleophilicity was unsuitable for polyaddition in this system. The chemical and physical properties of the obtained PDTUs such as solvent solubility, glass transition temperature, thermal stability, transparency, refractive index, and tensile strength, were analyzed in detail by gel permeation chromatography, nuclear magnetic resonance, Fourier transform infrared–attenuated total reflection, ultraviolet–visible, differential scanning calorimetry, thermogravimetric analysis, and tensile testing measurements. These results proved that PDTUs and their cast films having the aliphatic diisothiocyanate and dithiol moieties exhibited excellent chemical and physical properties compared to that of the aromatic PDTUs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2255–2262     

基于MPS方法的汽泡凝结数值模拟研究

采用移动粒子半隐式(MPS)方法对静止过冷水中单个汽泡的凝结现象进行了数值模拟,研究了不同初始压力和初始直径时饱和蒸汽汽泡凝结过程,获得了凝结过程中汽泡形状、当量直径和压力的变化规律;汽泡初始压力为0.1～0.5MPa,初始直径为2mm、3mm和5mm;过冷水压力为0.1MPa,温度为70℃。结果表明两相界面不存在压差时,凝结过程中汽泡始终保持球形,汽泡当量直径逐渐减小,压力近似不变;相界面存在压差时,凝结过程中汽泡从球形逐渐变为心形、半月形,汽泡当量直径和压力会出现周期性振荡,且初始压力越大振荡幅度越大。     

Experimental investigation on reversal of secondary Bjerknes force between two bubbles in ultrasonic standing wave

The direction of the secondary Bjerknes force between a free bubble and an attached bubble was experimentally investigated. The behavior of the two bubbles in an ultrasonic standing wave of 27 kHz was observed using an imaging system with a high-speed video camera. It was demonstrated experimentally that the direction of the force reversed at a specific separation distance between the two bubbles, which was defined as the threshold distance. The threshold distance changed with the radius of the attached bubble. In addition, a theoretical calculation was performed using a previously derived model that coupled the vibrations of two free bubbles [Ida, Phys. Lett. A 297, 210-217 (2002)]. The experiment data for the threshold distance qualitatively agreed with the theoretical predictions, except when the separation distance was very small. Then, it was discovered that the free bubble became trapped near the attached bubble when the separation distance between the two bubbles was very small. This indicated that a stable equilibrium point for the separation distance exists that cannot be predicted by the theoretical model.