L-卡尼丁分子压印聚合物作为手性分离色谱固定相的研究

以L－卡尼丁为模板分子，分别以α－甲基丙烯酸和丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为 剂，采用分子压印技术合成了对L－卡尼丁具有高选择性的分子压印聚合物。将所得聚合物用作高效液相色谱固定相，研究了它们对外消旋卡尼丁盐酸盐的拆分能力，分析结果表明，α－甲基丙烯酸作为功能单体所得聚合物对外消旋卡尼丁盐酸盐具有良好的拆分作用，其分离因子α为1．89。     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.     

碳点增强的Ru纳米颗粒复合材料用于碱性条件下高效电解水析氢

In the 21st century, hydrogen energy is a novel energy source. Its use is expected to mitigate the problems of environmental pollution and global warming caused by the excessive use of conventional fossil fuels. The hydrogen evolution reaction (HER) for water splitting has attracted considerable attention because of its environmental friendliness. To improve electrocatalyst performance and reduce operation cost, carbon-based metal hybrid materials exhibiting high efficiency and catalytic activity have been developed. Among them, carbon dots (CDs) have garnered significant research attention and have been widely applied in biosensing, bioimaging, and energy conversion/storage because of their facile synthesis, biocompatibility, tunable photoluminescence, excellent stability, and good electronic properties. CDs are widely used as carriers in the construction of electrocatalysts prepared from carbon-based metal hybrid materials. At present, it is believed that CDs exhibit excellent confinement effects, which can effectively inhibit the growth and agglomeration of metal nanoparticles, thereby preparing well-distributed carbon-based metal hybrid materials with a uniform and controllable size. However, the formation process of the small-molecule raw materials of CDs has not been elucidated. In this study, CDs and small-molecule raw materials from synthetic CDs were used as precursors to prepare nitrogen-doped CD-supported ruthenium nanoparticle (Ru@CDs) and small-molecule-supported ruthenium nanoparticle (Ru@Molecule) hybrid materials, respectively. The interaction between the small molecules and Ru in the process of CD formation and the effect on HER performance were explored. Moreover, we prepared different carriers such as metal organic frameworks(MOF), carbon nanotubes (CNTs), and graphene (GO)-supported ruthenium nanoparticle hybrid materials. Among them, Ru@CDs exhibited controllable size and excellent dispersibility and exhibited outstanding HER activity and good stability. Ru@CDs were found to require a low overpotential of 22 mV to reach a current density of 10 mA·cm⁻². Moreover, we observed the presence of an intermediate state between the molecules and CDs and demonstrated that the intermediate state exhibits no confinement effect. Furthermore, we found that with increasing calcination temperature, the intermediate state gradually changes to CDs. The unique spatial confinement between CDs and metal ions is key to the formation of monodisperse Ru nanoparticles. Our results confirmed that Ru@CDs serve as excellent HER catalyst supports. This work not only reveals the effect of the unique spatial confinement of CDs on the supported metals and their promoting effect on electrocatalytic activity but also provides guides the future development of CD-based metal hybrid electrocatalysts.     

Progress on the application of electrochemiluminescence biosensor based on nanomaterials

In this review, we check out the number of published literature in the field of ECL biosensors trends during nearly a decade, and compare the research status of four different types of biosensors; summarize the application forms of nanomaterials in ECL biosensor. We have an overview of the building patterns and application example of the four main types of biosensors in the paper.     

Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

AlCn及AlC+n(n=1-4)原子簇的理论研究

用ab initio能量解析梯度法，在UHF（RHF）／3－21G水平上优化得到AlCn，AlCn+（n＝1～3）的四十三个构型，在RHF（UHF）／3－21G水平上优化得到AlC4，AlC4+的二十六个构型，CISD能量．从能量角度所研究的AlCn，AlCn+（n=1～4）构型中，最稳定的构型均是线性构型，且Al全都在端点上，同文献报导的理论和实验结果相一致．此外，还研究了原子簇的离子化能，原子平均结合能以及原子簇的碎片化通道和碎片化能，并计算了上述最稳定构型的谐振动光谱常数．     

(Pd-Cu)/C上苯乙烯氧化羰化合成肉桂酸甲酯的研究

在常压130℃下研究了Pd-Cu催化剂组成,反应温度,少量添加剂和原料气中O_2含量等对苯乙烯氧化羰化合成肉桂酸甲酯的影响,并对催化剂的形、相态进行表征.发现O_2有双重作用;O_2不仅使Pd-Cu之间的价态循环,而且能抑制反应过程中饱和苯丙酸甲酯的生成.指出催化反应中Pd-Cu之间的催化协同效应促进了产物的生成.初步讨论了本反应的机理.     

果蔬中L—抗坏血酸的示波计时电位K3Fe（CN）6滴定法研究

本文报导的方法是在南京大学高鸿教授研究的K_3Fe(CN)_6示波极谱滴定法(在PH8的K_2HPO_4—KH_2PO_4—KBr底液中,用0.04660mol/LK_3Fe(CN)_6标准溶液对纯抗坏血酸测定)的基础上,考虑到L—抗坏血酸(以下简称V_e)在碱性、中性介质中稳定性差,如用于V_e含量很微的果蔬测定,对结果影响大。本文改为H_2C_2O_4—KBr的酸性介质作底液,用