Novel synthesis of 3-azabicyclo[3.1.0]hexanes by unusual palladium(0)-catalyzed cyclopropanation of allenenes

Novel stereoselective synthesis of 3-azabicyclo[3.1.0]hexanes from allenenes is presented. Treatment of N-protected 4-alkyl-4-(N-allyl)amino allenes with allyl carbonate and a catalytic amount of Pd(2)(dba)(3).CHCl(3) in MeCN leads to stereoselective formation of the 3-azabicyclo[3.1.0]hexane framework in moderate to good yields. [reaction: see text]     

Two new triterpenes from the seeds of Trichosanthes cucumeroides

Two new triterpenes named 7-oxodihydrokarounitriol (1) and 7,11-dioxodihydrokarounidiol (2), and one known triterpene, 7-oxodihydrokarounidiol (3), were isolated from the unsaponifiable matter of the seeds of Trichosanthes cucumeroides. The structures of 1 and 2 were elucidated as (3alpha, 11beta, 13alpha, 14beta, 20alpha)-3,11,29-trihydroxy-13-methyl-26-norolean-8-ene-7-one, and (3alpha,13alpha,14beta,20alpha)-3,29-dihydroxy-13-methyl-26-norolean-8-ene-7,11-dione on the basis of extensive NMR (1H, 13C, 1H-1H COSY, DEPT, HMQC, HMBC and NOESY) and MS studies.     

Simultaneous capillary electrophoretic separation and detection of P(V) and As(V) As heteropoly-blue complexes

A capillary electrophoretic (CE) method was developed for the simultaneous determination of P(V) and As(V). A Mo(VI)-ascorbic acid reagent reacted with a mixture of trace amounts of P(V) and As(V) to form the corresponding heteropoly-blue complexes in 0.05 M acetate buffer (pH 3.5). When 0.05 M malonate buffer was used as a migration buffer, the peaks due to their migrations were well separated in the electropherogram, and the pre-column complex-formation reaction was applied to the simultaneous CE determination of P(V) and As(V) with direct UV detection at 220 nm. With the proposed method, the calibration curves were linear in the concentration range of 5 x 10(-7) - 1 x 10(-4) M, with a detection limit of 1 x 10(-7) M (a signal-to-noise ratio of 3). Interference from foreign ions was also discussed.     

Block copolymerization. VII. Kinetic studies on the polymerization of pivalolactone with polystyrene dicarboxylates and polyacrylonitrile dicarboxylates

The rate of anionic polymerization of pivalolactone with polystyrene dicarboxylates decreased with conversion, suggesting deactivation of the propagating chain end by precipitation of the polymer during polymerization. The presence of unreacted initiator was explained by slow initiation for formation of a living polymer of pivalolactone. Various factors affecting block efficiency were discussed, and high efficiency was obtained for the preparation of block copolymers containing a long pivalolactone segment by using more nucleophilic polystyrene dicarboxylates. Block copolymer of acrylonitrile and pivalolactone was prepared from polyacrylonitrile dicarboxylates.     

Synthesis,crystal structures,and magnetic properties of two cyano-bridged tungstate(V)-manganese(II) bimetallic magnets

The reaction of manganese acetate with octacyanotungastate in an aqueous solution of concentrated acetic acid gives two new three-dimensional cyano-bridged manganese(II)-tungstate(V) bimetallic assemblies, [Mn(II)(2)(H(2)O)(2)(CH(3)COO)][W(V)(CN)(8)].2H(2)O (1) (tetragonal space group I4/mcm, a = b = 11.9628(9) A, c = 13.367(2) A, and Z = 4) and Cs(I)(0.5)Mn(II)(2)[W(V)(CN)(8)](CH(3)CO(2))(1.5).H(2)O (2) (monoclinic space group C2/c, a = 16.274(2) A, b = 22.948(6) A, c = 13.196(1) A, beta = 128.040(6) degrees, and Z = 8). In complex 1, W(V)(CN)(8) adopts a square antiprismatic geometry, and each CN group coordinates to the Mn(II) ions forming W-Mn(4)-W-Mn(4)-...columnar linkages where four sites on the Mn(II) ion with octahedral geometry are occupied by CN groups. The columns are parallel and interlock, yielding a network structure. Complex 2 contains two different coordination geometries for W(V)(CN)(8), namely, square antiprismatic and dodecahedral. The columnar structures appear also in 2, where the Mn(II) ions in two different environments provide three and four coordinated sites to the CN groups. The columns are bridged by both dodecahedral W(V)(CN)(8) groups and acetates. Cs ions were intercalated in the lattice by the formation of short attractive contacts with the acetates. The field-cooled magnetization, ac susceptibility, and the field dependence of magnetization measurements show that both 1 and 2 are ferrimagnets with ordering temperatures 40 and 45 K, respectively. The investigation of the magnetostructural correlation shows that the ferrimagnetic ordering in 1 and 2 are attributed to the dominant antiferromagnetic exchange pathways d(z)2(W)-d(x')(y')(Mn) and d(x)2(-y)2(W) - d(x')(y')(Mn).     

Novel synthesis of polymeric phase transfer catalyst containing polar unit

Soluble polymeric phase transfer catalysts (PTCs) containing benzyltributylphosphonium chloride moieties and p-nitrophenoxy group or N,N-dimethylacrylamide as a polar unit were prepared via two-step reactions from polymers with chloromethyl group and polar units. These polymers were synthesized by copolymerization of p-chloromethylstyrene and the corresponding monomer or substitution of some parts of chloromethyl group with potassium p-nitrophenoxide. When the obtained polymers were added, the phase transfer catalyzed reaction of benzylchloride with solid potassium acetate to proceed smoothly. The catalytic activity was strongly affected by the content of phosphonium chloride and the varieties of comonomer unit in the polymeric PTC. The polymeric PTC containing N,N-dimethylacrylamide unit showed much higher catalytic activity than the corresponding low molecular weight PTC when the phase transfer catalyzed reaction was carried out in low polar solvent. © 1994 John Wiley & Sons, Inc.     

Relationship between electrical resistivity and particle dispersion state for carbon black filled poly (ethylene-<Emphasis Type="Italic">co</Emphasis>-vinyl acetate)/poly (<Emphasis Type="SmallCaps">L</Emphasis>-lactic acid) blend

It is known that the electrical volume resistivity of insulating polymers filled with conductive fillers suddenly decreases at a certain content of filler. This phenomenon is called percolation. Therefore, it is known that controlling resistivity in the semi-conductive region for carbon black (CB) filled composites is very difficult. When poly (ethylene-co-vinyl acetate) (EVA) is used as a matrix, the percolation curve becomes gradual because CB particles disperse well in EVA. In this study, the relationship between the dispersion state of CB particles and electrical resistivity for EVA/poly (L-lactic acid) (PLLA) filled with CB composite was investigated. The apparent phase separation was seen in the SEM photograph. It was predicted that the CB particles located into the EVA phase in the light of thermodynamical consideration, which was estimated from the wetting coefficient between polymer matrix and CB particles. The total surface area per unit mass of dispersed CB particles in the polymer blend matrix was estimated from small-angle X-ray scattering and the volume resistivity decreased with increasing CB content. The values of the surface area of CB particles in CB filled EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) polymer blends showed a value similar to that of the CB filled EVA single polymer matrix. In electrical volume resistivity measurement, moreover, the slopes of percolation curves of EVA/PLLA (25/75 wt%) and EVA/PLLA (50/50 wt%) filled with CB composite are similar to that of EVA single polymer filled with CB composite. As a result, it was found that CB particles selectively locate in the EVA phase, and then the particle forms conductive networks similar to the networks in the case of EVA single polymer used as a matrix.     

Inclusion complex formation between alpha-cyclodextrin and biodegradable aliphatic polyesters

Inclusion complexes (ICs) between alpha-cyclodextrin (alpha-CD) and three kinds of biodegradable aliphatic polyesters with different sequence lengths of the monomeric repeating units poly(3-hydroxypropionate) [P(3HP)], poly(4-hydroxybutyrate) [P(4HB)] and poly(epsilon-caprolactone)(PCL) were prepared by mixing a solution of alpha-CD with that of the polymer, followed by stirring. The ICs were obtained as insoluble precipitates and characterized by FT-IR, WAXD and DSC. All measurements showed that the polymer chains of all three kinds of polyester were included into the alpha-CD cavity and formed ICs with different stoichiometries. WAXD patterns and thermal analysis indicated that these ICs possessed a channel structure and the crystallization of the polyester chains was suppressed upon inclusion into the alpha-CD cavity.     

Analysis of polymerase chain reaction-product by capillary electrophoresis with laser-induced fluorescence detection and its application to the diagnosis of medium-chain acyl-coenzyme A dehydrogenase deficiency

Capillary gel electrophoresis with laser-induced fluorescence (CGE-LIF) has been developed to detect polymerase chain reaction (PCR) amplified samples. LIF detection was performed using Thiazole Orange as the fluorescent intercalating dye. This method was ca. 100X as sensitive as that with UV detection. The highly sensitive CGE-LIF was applied to the detection of the most prevalent mutation (lysine³²⁹- to-glutamic acid substitution) in medium-chain acyl-coenzyme A dehydrogenase (MCAD) deficiency. The disorder, which shows an autosomal recessive inheritance, is known to be highly prevalent among Caucasian population and often mimics as Reye-like syndrome or sudden infant death.

A DNA fragment containing the mutation site was PCR-amplified with two sets of allele specific oligonucleotide primers, followed by CGE-LIF. The mutant allele produced a 175-base pairs DNA fragment, which the normal allele generated a 202-base pairs DNA fragment. CGE-LIF clearly distinguished these PCR products, facilitating rapid diagnosis of MCAD deficiency.     

Thin-layer chromatographic behavior and separation of alkaline earth metals on silica gel in aqueous sodium perchlorate solution

The thin-layer chromatographic behavior of alkaline earth metal ions (Mg2+, Ca2+, Sr2+, and Ba2+) in aqueous sodium perchlorate solutions on silica gel thin-layers impregnated with sodium hydroxide has been surveyed as a function of salt concentration. At salt concentrations above 2 mol 1(-1), the selectivity of the metals increased with a decrease in the crystal ionic radii; with further increases in salt concentration, the selectivity differences among the metals expanded remarkably. In the present systems, it was supposed that the cation exchange, the surface complexation, and the salting-out effect participate simultaneously in the adsorption of the metals on silica gel. Typical chromatograms for the mutual separation of the alkaline earth metals are presented.