Liquid chromatographic enantiomer resolution of N-fluorenylmethoxycarbonyl alpha-amino acids and their ester derivatives on polysaccharide-derived chiral stationary phases

The liquid chromatographic enantiomer separation of N-fluorenylmethoxycarbonyl (FMOC) protected alpha-amino acids and their ethyl ester derivatives was performed on polysaccharide-derived chiral stationary phases, Chiralcel OD, Chiralpak AD, and Chiralpak AS. In general, Chiralcel OD and Chiralpak AD showed good performance for resolution of N-FMOC alpha-amino acids and their ethyl esters, respectively. All investigated N-FMOC alpha-amino acid enantiomers were baseline separated on Chiralcel OD or Chiralpak AD, whereas N-FMOC alpha-amino acid ethyl ester enantiomers were baseline resolved (alpha = 1.15-3.03) on Chiralpak AD, except for two analytes. The L-enantiomers of all examined FMOC alpha-amino acid ethyl ester derivatives are preferentially retained on Chiralpak AD, while the elution orders of the other enantiomer separations are not consistent.     

Interface characteristics in diffusion bonding of Fe3Al with Cr18-Ni8 stainless steel

Fe3Al and Cr18-Ni8 stainless steel were diffusion-bonded in vacuum and a Fe3Al/Cr18-Ni8 interface with reaction layer was formed. Microstructure in the reaction layer at Fe3Al/Cr18-Ni8 interface was analyzed by means of scanning electron microscope (SEM) and electron probe micro-analyzer (EPMA). The growth of reaction layer with heating temperature (T) and holding time (t) was researched. The results indicate that FeAl, Fe3Al, Ni3Al, and alpha-Fe (Al) solid solution are formed in the reaction layer. These phases are favorable to promote the element diffusion and to accelerate the formation of the reaction layer at Fe3Al/Cr18-Ni8 interface. The growth of reaction layer obeys the parabolic law and its thickness (X) is expressed by X2 = 7.5 x 10(-4)exp(-83.59/RT)(t - t0).     

N-（4＇-取代嘧啶-2＇-基）-取代苯氧基磺酰脲的合成及除草活性

光谱;N-（4＇-取代嘧啶-2＇-基）-取代苯氧基磺酰脲的合成及除草活性     

Aromatization of methane over different Mo-supported catalysts in the absence of oxygen

Both acidity and structure of the support are important factors in converting methane to aromatics. Lower SiO₂/Al₂O₃ ratio seems to favor the aromatization of methane over the Mo/HZSM-5 catalyst. When Pt is added as a modifier the activity of Mo/HZSM-5 catalyst will decrease slightly, but coke formation will enhanced.     

溶剂浓度对PVDF相转换膜大孔结构的影响

提出决定大孔能否发展的初始分相点处溶剂浓度临界点的概念 ,认为初始分相点处较高的溶剂浓度有利于大孔的发展 ,溶剂浓度低于一定的界限后 ,大孔停止发展 ,转为海绵状结构 .实验考察了不同凝胶液组成下制得的PVDF中空膜的结构 ,建立了相应的传质模型 ,模拟不同制膜条件下初生态膜内的组成分布情况 ,根据初始分相点处溶剂浓度临界点的概念 ,预测膜的形态结构 .模拟结果与相应制膜条件下的电镜照片有很好的对应关系 ,证明了上述大孔形成机理的正确性 .     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

Use of on-line mass spectrometric detection in capillary electrochromatography

Capillary electrochromatography (CEC) is a liquid phase analytical separation technique that is generally carried out with packed capillary columns by electroosmotically driven mobile phase at high electric field strength. The analytes are separated by virtue of the differences in their distribution between the mobile and stationary phases and, if charged in their electrophoretic mobilities as well. It is thus considered a hybrid of liquid chromatography and capillary electrophoresis and is expected to combine the high peak efficiency of capillary zone electrophoresis (CZE) with the versatility and loading capacity of HPLC. This review explores the potential use of on-line mass spectrometric detection for CEC. It discusses key design issues that focus on the physical and electrical arrangement of the CEC column with respect to the electrospray orifice inlet. The salient features of the sheathless, sheath flow and liquid junction interfaces that are frequently employed while coupling a CEC column to an electrospray ionization mass spectrometry system are also highlighted. Possible configurations of the CEC column outlet that would obviate the need for pressurizing the capillary column are also presented. While coupling CEC with MS both the nature of the interface and the configuration of the column outlet will determine the optimal arrangement. The review also discusses bandspreading that occurs when a connecting tube is employed to transfer mobile phase from the column outlet to the atmospheric region of the electrospray source with a concomitant loss in sensitivity. Selected examples that highlight the potential of this technique for a wide range of applications are also presented.     

High-resolution electron microscopy of montmorillonite and montmorillonite/epoxy nanocomposites

With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.