钙黄绿素蓝荧光法测定食品中的微量锌（Ⅱ）

本文研究了在ＣＴＭＡＢ存在下，用钙黄绿素蓝荧光法测定食品中的微量锌（Ⅱ）的实验条件。在本实验条件下，Ｚｎ（Ⅱ）与钙黄绿素蓝生成１：１的配合物使钙黄绿素蓝的荧光增强，最大激发波长和最大发射波长分别为３５３ｎｍ和４４０ｎｍ。     

相变温度低且宽的含有胆甾烯基和反式-4-烷基环己基苯氧基的二介晶化合物

Unsymmetrical dimesogenic compounds with cholesteryl and 4-（trans-4-n-alkylcyclohexyl）phenoxy parts were synthesized by condensation of cholester-3-yl 6-bromohexanoate with appropriate 4-（trans-4-n-alkylcyclohexyl）- phenols. Structures and thermal phase behaviour of these dimesogenic compounds have been confirmed by IR, IH NMR, elemental analysis, DSC, polarity microscopy and XRD measurements. Their thermal phase behaviour was significantly different with that of other cholesterol-based dimesogens while they exhibited low and wide phase transition temperature.     

稀土丙烯酸盐与8－羟基喹啉三元固态配合物的合成与表征

稀土丙烯酸盐与８－羟基喹啉三元固态配合物的合成与表征李长正，王学智，唐宁，谭民裕（兰州大学化学系兰州７３００００）关键词：稀土，丙烯酸，８－羟基喹琳，三元配合物８－羟基喹琳因其具有优良的配位性能而被广泛应用于金属离子的分离和分析中［１］。文献中有关它...     

螺旋结构与旋光性——2.脂族链状化合物的螺旋结构和旋光性

利用弯曲键理论,详细讨论了旋光性的脂肪族链状化合物分子内存在的螺旋结构,同样是右螺是右旋的,左螺旋是左旋的。从螺旋方向可以推断旋光方向,知道旋光方向也可以推断构型。     

担载液相催化剂的研究——Ⅳ.催化剂的原位红外光谱表征

本文利用原位红外光谱方法对铑基担载液相催化剂(SLPC)在接近于实际反应条件下进行了表征。结果表明,新鲜催化剂上,铑膦络合物主要以二聚物的形式存在,如Rh_2(CO)_2(PPh_3)_4而在合成气或反应气氛中,催化剂铑膦络合物以单核络合物HRh(CO)_2(PPh_3)_2的形式存在。文中还对SLPC在CO,H_2,C_2-H_4,空气和HCl中处理时铑络合物种的变化进行了原位观察。实验结果表明,SLPC上活性铑络合物与对应的均相过程完全一致,进一步证实了SLPC催化在微观上就是一个均相催化过程。     

Study on the new fluorescence enhancement system of Tb-1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane in silver chloride collosol and its analytical application

A new salicylic-based open-chain crown ether ligand, 1,10-bis(2′-carboxylphenyl)-1,4,7,10-tetraoxadecane (BCPTD) was synthesized. Solutions of its complex with Tb³⁺ can emit the intrinsic fluorescence of Tb³⁺. The fluorescence intensity of the complex in KCl solution was enhanced by the addition of silver(I), leading to a new fluorescence enhancement phenomenon. The spectrofluorimetric determination of traces of silver(I) based on the above phenomenon was carried out. The excitation and emission wavelengths are 298 and 545 nm, respectively. Under optimal conditions, the differential value of fluorescence intensity in the absence and presence of Ag⁺ was proportional to the concentration of silver(I) in the range 0.5-20 μg ml⁻¹. The method was applied to the determination of silver(I) in a standard ore sample. The analytical performance is investigated in detail by using common aromatic carboxylic acids or synthetic analogues of BCPTD as ligands to replace BCPTD. It was found that Tb-aromatic acid complexes did not result in fluorescence enhancement of Tb³⁺ in AgCl collosol. The phenomenon was only observed in Tb(III) with BCPTD or its open-chain crown ether analogues solutions.In addition, the enhancement of the fluorescence intensity of terbium(III) in these complexes depends on the extent of formation of the AgCl collosol.     

Synthesis of silk-like FeS2/NiS2 hybrid nanocrystals with improved reversible oxygen catalytic performance in a Zn-air battery

The development of highly active and stable reversible oxygen electrocatalysts is crucial for improving the efficiency of metal-air battery devices. Herein, an efficient liquid exfoliation strategy was designed for producing silk-like FeS₂/NiS₂ hybrid nanocrystals with enhanced reversible oxygen catalytic performance that displayed excellent properties for Zn-air batteries. Because of the unique silk-like morphology and interface nanocrystal structure, they can catalyze the oxygen evolution reaction (OER) efficiently with a low overpotential of 233 mV at j = 10 mA cm^?2. This is an improvement from the recently reported catalysts in 1.0 M KOH. Meanwhile, the oxygen reduction reaction (ORR) activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals showed an onset potential of 911 mV and a half-wave potential of 640 mV. In addition, the reversible oxygen electrode activity of the silk-like FeS₂/NiS₂ hybrid nanocrystals was calculated to be 0.823 V, based on the potential of the OER and ORR. Further, the homemade rechargeable Zn-air batteries using FeS₂/NiS₂ hybrid nanocrystals as the air-cathode displayed a high open-circuit voltage of 1.25 V for more than 17 h and an excellent rechargeable performance for 25 h. The solid Zn-air batteries exhibited an excellent rechargeable performance for 15 h. This study provided a new method for designing interface nanocrystals with a unique morphology for efficient multifunctional electrocatalysts in electrochemical reactions and renewable energy devices.     

Pd-catalyzed intermolecular amidation of aryl halides: the discovery that xantphos can be trans-chelating in a palladium complex

A general method for the intermolecular coupling of aryl halides and amides using a Xantphos/Pd catalyst is described. This system displays good functional group compatibility, and the desired C-N bond forming process proceeds in good to excellent yields with 1-4 mol % of the Pd catalyst. Additionally, the arylation of sulfonamides, oxazolidinones, and ureas is reported. The efficiency of these transformations was found to be highly dependent on reaction concentrations and catalyst loadings. A Pd complex resulting from oxidative addition of 4-bromobenzonitrile, (Xantphos)Pd(4-cyanophenyl)(Br) (II), was prepared in one step from Xantphos, Pd(2)(dba)(3), and the aryl bromide. Complex II proved to be an active catalyst for the coupling between 4-bromobenzonitrile and benzamide. X-ray crystallographic analysis of II revealed a rare trans-chelating bisphosphine-Pd(II) structure with a large bite angle of 150.7 degrees.     

The determination of calcium in yttrium oxide by alpha-particle activation analysis

The determination of calcium in yttrium oxide through the⁴⁰Ca(α, p)⁴³Sc reaction was studied, using a post-irradiation radiochemical separation procedure. The half-life of⁴³Sc was determined to be 3.87 hr. The chemical recovery was about 70%. The detection limit was about 10 ppb, for a 30 min irradiation at an alpha-particle beam current of 1 μA (E_α=13.4 MeV) and γ−γ coincidence counting (background counts being<1, cpm), with counting starting at 4 hours after the end of irradiation. Four samples of a batch of yttrium oxide (A.R.) were analyzed, and found to contain 13.9±1.0 ppm of calcium.     

Enantioselective transition metal catalysis directed by chiral cations

Enantioselective transition metal catalysis directed by chiral cations is the amalgamation of chiral cation catalysis and organometallic catalysis. Thus far, three strategies have been revealed: ligand scaffolds incorporated on chiral cations, chiral cations paired with transition metal ‘ate’-type complexes, and ligand scaffolds incorporated on achiral anions. Chiral cation ion-pair catalysis has been successfully applied to alkylation, cycloaddition, dihydroxylation, oxohydroxylation, sulfoxidation, epoxidation and C–H borylation. This development represents an effective approach to promote the cooperation between chiral cations and transition metals, increasing the versatility and capability of both these forms of catalysts. In this review, we present current examples of the three strategies and suggest possible inclusions for the future.

Enantioselective transition metal catalysis directed by chiral cations is the amalgamation of chiral cation catalysis and organometallic catalysis.