利用GHZ态实现多原子缠结态的量子隐形传态(英文)

提出一种利用 GHZ态实现多原子缠结态的量子隐形传态方案 .当作为量子通道的 GHZ态含有一个单模高 Q腔时 ,大大地简化了量子稳形传态中的联合测量过程     

New solitary wave solutions for nonlinear evolution equations

Three important nonlinear evolution equations are solved with the aid of the symbolic manipulation system.Maple,using the direct algebraic method proposed recently,We explicitly obtain several new solutions of physical interest in addition to rederiving all the known solutions.     

Effects of duty ratio at low frequency on growth mechanism of micro-plasma oxidation ceramic coatings on Ti alloy

The aim of this work is to study the effects of duty ratio on the growth mechanism of the ceramic coatings on Ti-6Al-4V alloy prepared by pulsed single-polar MPO at 50 Hz in NaAlO₂ solution. The phase composition of the coatings was studied by X-ray diffraction, and the morphology and the element distribution in the coating were examined through scanning electron microscopy and energy dispersive spectroscopy. The thickness of the coatings was measured by eddy current coating thickness gauge. The corrosion resistance of the coated samples was examined by linear sweep voltammetry technique in 3.5% NaCl solution. The changes of the duty ratio (D) of the anode process led to the changes of the mode of the spark discharge during the pulsed single-polar MPO process, which further influenced the structure and the morphology of the ceramic coatings. The coatings prepared at D = 10% were composed of a large amount of Al₂TiO₅ and a little γ-Al₂O₃ while the coatings prepared at D = 45% were mainly composed of α-Al₂O₃ and γ-Al₂O₃. The coating thickness and the roughness were both increased with the increasing D due to the formation of Al₂O₃. The formation of Al₂TiO₅ resulted from the spark discharge due to the breakdown of the oxide film, while the formation of Al₂O₃ resulted from the spark discharge due to the breakdown of the vapor envelope. The ceramic coatings improved the corrosion resistance of Ti-6Al-4V alloy. And the surface morphology and the coating thickness determined the corrosion resistance of the coated samples prepared at D = 45% was better than that of the coated samples prepared at D = 10%.     

Investigation of Bessel beam propagation in scattering media with scalar diffraction method

Bessel beam propagation in scattering media is simulated using the angular spectrum method combined with slice-by-slice propagation model. Generating Bessel beams with a spatial light modulator, which provides a means to adjust flexibly the parameters of the Bessel beam, allows us to validate the simulation results experimentally. The study reveals that the self-reconstructing length changes oppositely with the axicon angle （i.e., the larger the axieon angle, the shorter the self-reconstructing length）. The radius of the incident beam has little influence on the self-reconstruction of the Bessel beam central lobe.     

Multiple fire interactions: A further investigation by burning rate data of square fire arrays

This paper presents the first effort to explore the spatial distributions of the burning rates in group fires consisting of a large number of fire points, by analyzing burn-out time data from experimental square fire arrays ranging from 3 × 3 to 15 × 15. A new concept termed fire layer is introduced and defined to characterize the spatial locations of fire points by which the complex spatial variations of burning rates, under different conditions, are analyzed and physically interpreted. Analysis shows that the fire layer burning rates vary from outer to inner in definite nonlinear modes. This indicates that the two fire interaction effects, heat feedback enhancement and air supply restriction, involve distinct spatial fluctuations in fire arrays. The spatial fluctuations of the two interaction effects are significantly affected by the two major parameters, fire spacing and fire array size. Definite spatial regions and parameter ranges for the spatial fluctuations and high competitions of the two interaction effects are clearly distinguished. It is demonstrated that the average burning rates of all fire layers involve consistent variations versus fire spacing or fire array size, especially with high comparability to the entire fire array. It is found that by varying fire spacing, the average burning rates for all fire layers vary linearly versus the fire area ratio, within the same ranges as the entire fire array, while there exist different fluctuation modes of fire layer burning rates with respect to fire array size. Furthermore, analysis shows that the burning rates of all fire layers will be significantly affected by fire merging when it occurs. Finally, a new approach is presented to simulate fire propagation among discrete fuel sources, by which the positive effect of the surrounding new fire points on the burning rates of the original ones is definitely indicated.     

An improved radio frequency heavy ion source

Abstract

An improved r.f. heavy ion source, which can operate with gases, liquids and solids is described. The operating temperature of the ion source may reach 1000°C. It can therefore, generate ion beams of a considerable number of elements. including metallic ions. At present, ion beams of S⁺, Al⁺, As⁺. Zn⁺, Mg⁺, Cd⁺, Ag⁺, Sm⁺, Te⁺, Se⁺, Sn⁺, In⁺, Hg⁺, etc. have been extracted. The extracted total beam current ranges from several hundred microamperes to the order of milliampere. The useful fraction of ion in the total beam is 70–90%. Life span of the source ranges from 40 hours to more than 100 hours. The emittance of the source is 3 × 10^?6 cm rad. Structure and operating characteristics of this ion source are discussed.     

High-power,high-quality ZGP OPO pumped by a Tm,Ho:GdVO<Subscript>4</Subscript> laser

We report a ZGP OPO system capable of producing >6 W at a signal wavelength of 3.80 μm and an idler wavelength of 4.45 μm. The pumping source is the Tm,Ho:GdVO₄ laser operated at 2.049 μm with an M ² of 1.07. The ZGP OPO generated a total combined output power of 6.1 W at signal wavelength and idler wavelength under pumping power of 18.3 W, and an M ² of 1.7 for OPO output was obtained.     

In vivo label-free photoacoustic microscopy of cell nuclei by excitation of DNA and RNA

Imaging of cell nuclei plays a critical role in cancer diagnosis and prognosis. To image noninvasively cell nuclei in vivo without staining, we developed UV photoacoustic microscopy (UV-PAM), in which 266 nm wavelength UV light excites unlabeled DNA and RNA in cell nuclei to produce photoacoustic waves. We applied UV-PAM to ex vivo imaging of cell nuclei in a mouse lip and a mouse small intestine and to in vivo imaging of the cell nuclei in the mouse skin. The UV-PAM images of unstained cell nuclei match the optical micrographs of the histologically stained cell nuclei. Given intrinsic optical contrast and high spatial resolution, in vivo label-free UV-PAM has potential for unique biological and clinical application.     

高温、高压、高应变速率动态过程晶体塑性有限元理论模型及其应用

对于高温、高压、高应变速率加载条件下的材料冲击变形行为,动态晶体塑性模型能够直接反映晶体中塑性滑移的各向异性及其对温度、压力和微观组织结构的依赖性,因而广泛应用于材料的动态冲击力学响应、微观结构演化以及动态损伤破坏的模拟。本文综述了高压冲击下动态晶体塑性有限元的理论模型,主要包括变形运动学、包含状态方程的超弹性本构模型和晶体塑性本构模型,涉及位错滑移、相变、孪生等塑性变形机制,以及层裂、绝热剪切带等动态破坏方式。