Phase Transition and High Piezoactivity of Sb Doped （Na0.53K0.435Li0.035）Nb0.94Ta0.06 O3 Lead-Free Ceramics

Lead-free piezoelectric ceramics with the composition of （Na0.53K0.435Li0.035）Nb0.94Ta0.06 O3 （NKLNST） axe synthesized by a conventional solid-state sintering process. An MPB-like region between orthorhombic and pseudocubic phases is found in this system. The density, piezoelectric and dielectric properties axe enhanced greatly in this region. A composition （Na0.53K0.435Li0.035）（Nb0.94Ta0.06）O3 is found to have excellent electrical properties： d33 = 320pC/N, kp= 49% and kt =43%, as well as relatively low loss, tan δ=4.2%, and high relative density higher than 96%, which indicate that this ceramics is a promising lead-free piezoceramics replacing for lead zirconate titanate.     

液滴在粗糙固体表面上的铺展特性

本文建立了粗糙固体表面上液滴铺展过程的理论模型并采用了格子Boltzmann方法进行数值模拟,研究了粗糙与光滑表面上液滴铺展过程的形貌变化。研究结果表明,无论表面光滑还是粗糙,液滴都沿着半径方向逐渐铺展,整体首先呈帽形,随着时间的推移,液滴在表面铺展成一平面。粗糙表面与光滑表面铺展特性间的差异主要在于粗糙表面液滴受到粗糙元干扰,其铺展形状随时间推移由圆形向八边形过渡.粗糙元间隙的增大导致液滴润湿半径增大,液滴厚度沿半径方向变化梯度降低。     

奇相干光源的测量设备无关量子密钥分配研究

刻画了奇相干光源的光子数分布特征,研究了奇相干光源下诱骗态测量设备无关量子密钥分配系统的密钥生成率与安全传输距离的关系,推导了奇相干光源下的计数率下界和误码率上界.仿真结果表明,奇相干光源光子数分布中多光子脉冲的比例低于弱相干光,可以有效提高诱骗态测量设备无关密钥分配系统的最大安全通信距离,为实用的量子密钥分配实验提供了重要的理论参数.     

Highly stable amorphous indium‐zinc‐oxide thin‐film transistors with back‐channel wet‐etch process

The stabilities of amorphous indium‐zinc‐oxide (IZO) thin film transistors (TFTs) with back‐channel‐etch (BCE) structure are investigated. A molybdenum (Mo) source/drain electrode was deposited on an IZO layer and patterned by hydrogen peroxide (H₂O₂)‐based etchants. Then, after etching the Mo layer, SF₆ plasma with direct plasma mode was employed and optimized to improve the bias stress stability. Scanning electron microscopy and X‐ray photoelectron spectroscopic analysis revealed that the etching residues were removed efficiently by the plasma treatment. The modified BCE‐ TFTs showed only threshold voltage shifts of 0.25 V and –0.20 V under positive/negative bias thermal stress (P/NBTS, V_GS = ±30 V, V_DS = 0 V and T = 60 °C) after 12 hours, respectively. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

大功率高温超导滤波器的设计与功率测试

本文在双面YBCO高温超导薄膜上设计并制备了两节大功率超导滤波器,根据滤波器功率承载能力与最大电流密度之间的关系,减小电流密度和分散电流密度的分布是提高功率承载能力的关键.本文采用增加超导谐振器尺寸、优化几何结构及改进馈线耦合方式的方法,设计了两节2 GHz频段梭型谐振器结构的滤波器.设计及测量结果显示了馈线结构及谐振器几何尺寸优化程度对超导滤波器功率承载能力有不同程度的影响,说明了在大功率超导滤波器设计中应选用无结点间隙耦合式馈线以抑制电流密度的聚集.采用优化后的谐振器结构制备的梭型两节超导滤波器经测试功率承载能力为2 W.超导滤波器的尺寸为25×12 mm LaAlO3基片,中心频率2.022 GHz,相对带宽为2.4%.同时给出了超导滤波器功率测试的结构和方法.     

蛋白质芳香基团的~1H-~(13)C HSQC信号增强研究(英文)

含芳香环的氨基酸残基多处于蛋白质的疏水内核或者是蛋白质与配体的结合部位,这些残基间的非共价键相互作用对于蛋白质结构的稳定性和生物的特异性识别有重要意义.因此,在蛋白质的核磁共振研究中,芳香基团被认为是一个研究蛋白质结构动力学的潜在探针.但是由于芳香基团的1H-13C HSQC谱的灵敏度较低,目前,利用核磁共振对其进行研究乏善可陈.造成这一现象的主要原因可能在于芳香环体积较大,往往存在慢的翻转运动,导致其NMR信号被展宽.作者利用CPMG-INEPT HSQC序列可以有效地减小慢运动影响的特征,将其应用到了GB1蛋白质芳香环的1H-13C HSQC谱中,有效的增强了芳香基团HSQC谱信号的灵敏度,得到了部分在常规HSQC中无法观测的信号.     

Suppression of thermoelastic damping in MEMS beam resonators by piezoresistivity

Microelectronic mechanical (MEM) beam resonators with high quality factors are always preferred in practical applications. As one of the damping sources, thermoelastic damping (TED) caused by irreversible heat flows is usually considered as an upper limit of the overall damping effect. A new method is proposed in this work to compensate TED by taking advantage of the piezoresistive effect. Such a method is implemented by applying an electrostatic field along the beam length with a negative piezoresistive coefficient. During a resonance, the stretched part of the beam generates a higher electrical power density and thus a higher temperature, while the compressed region leads to a lower temperature. Such a temperature distribution is opposite to the temperature change caused by the thermoelastic effect. The working principle is described by a set of coupled differential equations, which are subsequently solved by the finite element method. The result indicates that the TED in the beam resonators can be completely compensated when the strength of electrical field is tuned to a critical value, namely CEF. The value of the CEF is further analyzed by a series of parametric studies on various material properties and geometric factors.     

基于RFID及3G网络的物流跟踪系统研究

为实现物流货物自动跟踪,通过RFID电子标签自动记录货物的收货、入库、卸货、送货全过程,在运输途中,通过传感器实时采集运输环境参数并通过3G上传到服务器,在地图上实现货物位置、运输环境、货物名称的精确对比,运输环境不合适时及时报警;详细介绍了系统的整体设计,并对系统的软硬件设计进行了分析,测试结果表明,系统整体稳定,环境测量误差率低,能够实现物流货物的全程跟踪,该系统可广泛应用于物流业。     

三效吸收式制冷循环系统性能分析

对12个通用的三效循环系统以及这12个通用循环系统组成的76种可能的密闭循环系统进行了评测。根据通用三效循环系统的压力和溶解度要求,对通用三效循环系统进行了分析,并充分考虑各部件设计中的问题和COPs数值,以及处于高腐蚀环境中部件的数目。通过分析,确定了四个性价比较优的系统:Alkitrate Topping循环系统,Pressure Staged Envelope循环系统,High Overlap循环系统和Dual Loop循环系统。     

The influence of thermally assisted tunneling on the performance of charge trapping memory

We evaluate the influence of the thermally assisted tunneling (TAT) mechanism on charge trapping memory (CTM) cell performance by numerical simulation, and comprehensively analyse the effects of the temperature, trap depth, distribution of trapped charge, gate voltage and parameters of TAT on erasing/programming speed and retention performance. TAT is an indispensable mechanism in CTM that can increase the detrapping probability of trapped charge. Our results reveal that the TAT effect causes the sensitivity of cell performance to temperature and it could affect the operational speed, especially for the erasing operation. The results show that the retention performance degrades compared with when the TAT mechanism is ignored.