Computational studies on 3,5,7,10,12,14,15,16-octanitro-3,5,7,10,12,14,15,16-octaaza-pentacyclo[7.5.1.12,8.04,13.06,11]hexadecane as potential high-energy-density compound

The B3LYP/6-31G(d) method of density functional theory was used to study molecular geometry, electronic structure, infrared spectrum, and thermodynamic properties. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. Thermal stability of 3,5,7,10,12,14,15,16-octanitro-3,5,7,10,12,14,15,16-octaaza-pentacyclo[7.5.1.1^2,8.0^4,13.0^6,11]hexadecane (cage-HMX) was investigated by calculating the bond dissociation energy at unrestricted B3LYP/6-31G(d) level. The calculated results show that the first step of pyrolysis is the rupture of the N–NO₂ bond. The crystal structure obtained by molecular mechanics belongs to P2₁ space group, with lattice parameters a = 8.866 Å, b = 11.527 Å, c = 13.011 Å, Z = 4, and ρ = 2.219 g cm^?3. Both the detonation velocity of 9.79 km s^?1 and the detonation pressure of 45.45 GPa are better than those of CL-20. According to the quantitative standard of energetics and stability as a high-energy-density compound, cage-HMX essentially satisfies this requirement. These results provide basic information for molecular design of novel HEDCs.     

Design and Performances of a Carbon Monoxide Sensor Using Mid-Infrared Absorption Spectroscopy Technique at 4.6 µm

Based on infrared absorption spectroscopy technique, a carbon monoxide sensor was developed using the fundamental absorption band of carbon monoxide molecule at the wavelength around 4.6 µm. The developed sensor consists of pulse-modulated wideband incandescence, open ellipsoid light-collector gas-cell, dual-channel detector, and control and signal-processing module. With the prepared standard carbon monoxide gas sample, sensing characteristics on carbon monoxide were investigated using the sensor. Experimental results reveal that the limit of detection is about 10 ppm, the relative error at the limit of detection point is less than 14%, and that is less than 7.8% within the low concentration range of 20～180 ppm. The maximum absolute errors of 50 min long-term measurement on the 0 and 14 ppm CO gas samples are about 3 and 3.17 ppm, respectively, and the standard deviations are as small as 0.18 and 1.25 ppm, respectively. Compared with the reported carbon monoxide detection systems utilizing quantum cascaded lasers and distributed feedback lasers, the proposed sensor shows potential applications in carbon monoxide detection under the circumstances of coal-mine and environmental protection, by virtue of high performance, low cost, simple optical structure, and so on.     

Assembly of peptide–thiophene conjugates: the influence of peptide content and location

Biomolecule-directed self-assembly of π-conjugated oligomers has attracted great attention in the past decade. In this contribution, two conjugates composed of quaterthiophene and tetrapeptide (Gly-Val-Gly-Val) were synthesised, namely peptide–thiophene–peptide (PTP) and thiophene–peptide–thiophene (TPT), to investigate the influence of peptide content ratio and its location in the molecular structures on the nanostructures and properties of the assemblies. Both conjugates formed organogels consisting of left-handed twisted nanostructures; however, anti-parallel β-sheets were observed in PTP while parallel β-sheets were obtained for TPT, although in both cases oligothiophenes adopted an H-like stacking mode. Obvious solvent-induced supramolecular chirality inversion from the oligothiophene segment was observed for PTP while such phenomenon was not clear for TPT. PTP and TPT gels also showed different stabilities towards temperature increase, as evidenced by variable-temperature circular dichroism study. From the data, it is suggested that the rational design of the location and ratio of peptide plays a key role in constructing materials with determined properties based on peptide–thiophene conjugates.     

Palladium‐catalyzed Suzuki–Miyaura coupling with aryl and heteroaryl bromides using N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine

An easily prepared tetraphosphine N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine (1) combined with PdCl₂ affords an efficient catalytic system for Suzuki cross‐coupling of aryl and heteroaryl bromides. A high turnover number of 750 000 is obtained with the catalyst loading as low as 1 ppm. This catalyst system exhibits good stability and longevity. In this study, a broad scope of substrates is investigated and satisfactory yields are obtained. Copyright © 2012 John Wiley & Sons, Ltd.     

Synergistic Effect of Boron Nitride and Carbon Domains in Boron Carbide Nitride Nanotube Supported Single-Atom Catalysts for Efficient Nitrogen Fixation

Developing the low-cost and efficient single-atom catalysts (SACs) for nitrogen reduction reaction (NRR) is of great importance while remains as a great challenge. The catalytic activity, selectivity and durability are all fundamentally related to the elaborate coordination environment of SACs. Using first-principles calculations, we investigated the SACs with single transition metal (TM) atom supported on defective boron carbide nitride nanotubes (BCNTs) as NRR electrocatalysts. Our results suggest that boron-vacancy defects on BCNTs can strongly immobilize TM atoms with large enough binding energy and high thermal/structural stability. Importantly, the synergistic effect of boron nitride (BN) and carbon domains comes up with the modifications of the charge polarization of single-TM-atom active site and the electronic properties of material, which has been proven to be the essential key to promote N₂ adsorption, activation, and reduction. Specifically, six SACs (namely V, Mn, Fe, Mo, Ru, and W atoms embedded into defective BCNTs) can be used as promising candidates for NRR electrocatalysts as their NRR activity is higher than the state-of-the art Ru(0001) catalyst. In particular, single Mo atom supported on defective BCNTs with large tube diameter possesses the highest NRR activity while suppressing the competitive hydrogen evolution reaction, with a low limiting potential of −0.62 V via associative distal path. This work suggests new opportunities for driving NH₃ production by carbon-based single-atom electrocatalysts under ambient conditions.     

不同尺寸的NdFeB稀土永磁体热退磁行为研究

针对不同类型及不同尺寸的两类NdFeB永磁体分别研究了它们随温度变化的热退磁行为。采用样品的整体剩余磁通来表征热退磁过程中磁体性能的变化。结果表明,Pc较小的永磁体温度稳定性较差,随温度的升高,样品的剩余磁通迅速衰减;Pc<<0.1的普通型永磁体,温度为100℃时样品的剩余磁通损失超过60%。高矫顽力型永磁体比普通型磁体具有更优越的温度稳定性和高温性能。温度升高主要导致磁体矫顽力降低,140℃时普通型磁体的矫顽力降低约80%,而高矫顽力型磁体的矫顽力只降低了约20%。     

Determination of ecliptasaponin A in rat plasma and tissues by liquid chromatography‐tandem mass spectrometry

A sensitive, rapid and specific high‐performance liquid chromatography tandem mass spectrometry method (HPLC‐MS/MS) was developed to determine ecliptasaponin A in rat plasma and tissues after oral administration. Ginsenoside Rg1 was used as the internal standard (IS). The plasma and tissues samples were prepared by liquid‐liquid extraction with ethyl acetate and separated on an Eclipse Plus C₁₈ column (2.1 mm × 150 mm, 5 µm) at a flow rate of 0.4 mL/min using acetonitrile and water (containing 0.05% acetic acid) as the mobile phase. The tandem mass detection was carried out with eletrospray ionization in negative mode. Quantification was performed by using multiple reaction monitoring (MRM), which monitored the fragmentation of m/z 633.4→587.2 for ecliptasaponin A and m/z 859.4→637.4 for the IS. The calibration curves obtained were linear in different matrices, and the lower limit of quantification (LLOQ) achieved was 0.5 ng/mL both for rat plasma and tissues. The intra‐ and inter‐day precisions were below 15%. This method was successfully applied to pharmacokinetic study of ecliptasaponin A in rat plasma and tissues after oral administration. Copyright © 2015 John Wiley & Sons, Ltd.