激光惯性约束聚变靶制备技术研究进展

在实验室实现聚变反应释放的能量大于点燃聚变反应所需能量的阈值是当今世界ICF研究的主要目标,实现这一目标仍需要深入研究一系列的关键物理问题。在ICF研究中,制靶能力的发展与提升至关重要,靶的质量是实验成功的核心要素之一。本文介绍了国际ICF靶制备工作近年来在新型烧蚀层材料靶丸、新型靶丸支撑技术、优化黑腔材料与构型以及减小燃料填充管直径等方面取得的一系列进展,并结合ICF物理需求,简要阐述了ICF靶的发展趋势。     

激光束散角复合控制技术

为了降低部分相干光光学系统设计的复杂度及成本,增加部分相干光应用的便捷性,提出了一种液晶空间光调制器的激光相干度及束散角复合控制方法。首先介绍了对激光光束进行相干度和束散角复合控制的基本理论和方法;然后分别设置了相干度和束散角检测实验,检测了本方法所调制激光光束的相干度和束散角的准确性。实验结果表明,采用液晶空间光调制器生成相干度为0.9 mm、束散角为7.5 mrad,以及相干度为1.5 mm、束散角为3.8 mrad的部分相干光束,其相干度与理论值相比误差在5%以内,其相干度均方根误差分别为0.027386和0.031314,峰谷值分别为0.084 658和0.089 103;其束散角与理论值相比误差在5%以内,其束散角均方根误差分别为0.022 478和0.023 186,峰谷值分别为0.081 201和0.092 130。可见,该方法可以实现高精度的相干度及束散角复合控制。     

金属表面镀高分子膜对真空击穿阈值的影响

探索提高金属表面真空击穿阈值的方法,对脉冲功率技术的发展和应用具有重要意义。在金属表面电子发射理论分析的基础上,采用有限元法计算阴极杆表面电场随二极管电压的变化规律,设计了实验系统,并开展了实验研究。实验对比了在脉宽约30 ns、阴极杆与阳极筒间隙12 mm时,钛合金TC4阴极杆在不同种类高分子膜（膜厚30～60 μm）下真空击穿阈值的变化情况。在表面粗糙度R_z（轮廓最大高度）为0.8 μm的TC4阴极杆表面分别镀环氧树脂膜和丙烯酸膜,实验结果表明,镀丙烯酸膜阴极杆的击穿阈值约505 kV/cm,相对于不镀膜阴极杆,击穿场强提高了约20.6%;在表面粗糙度R_z为0.2 μm的TC4阴极杆表面分别镀聚酰亚胺膜和聚醚醚酮膜,实验结果表明,镀聚酰亚胺膜阴极杆的击穿阈值为584 kV/cm,相对于不镀膜阴极杆,击穿场强提高了约28.1%。因此,在金属表面镀丙烯酸膜、聚酰亚胺膜可以有效提高金属表面的真空击穿阈值。     

浮升力和流动加速对超临界CO2管内流动传热影响

基于单相流体的概念,超临界流体的异常传热行为已经被研究很多年了,但是关于其流动传热机理仍没有统一的认识.本文通过理论分析和实验研究了超临界二氧化碳在竖直管内向上流动过程中,浮升力和流动加速效应对其流动结构和传热过程的影响.结果表明,没有确凿的实验证据表明超临界流体的异常传热行为是浮升力和流动加速直接导致的,存在的估计浮升力和流动加速效应准则均是在常物性流体的基础上,做了大量假设得出的,不同的研究者采用浮升力和流动加速准则分析超临界流体的传热恶化得出的结论不一致.最后,基于拟沸腾理论分析超临界流体的传热恶化过程,提出超临界沸腾数区分了超临界流体正常传热与恶化传热的转换边界,为超临界流体流动传热研究提供新思路,超临界沸腾数对建立用于不同技术的超临界流体动力循环的最佳运行条件具有重要意义.     

光学共振增强的表面铯激活银纳米结构光阴极

金属光阴极因其超短脉冲发射和运行寿命长的特性从而具有重要应用价值,但是较高的功函数和较强的电子散射使其需要采用高能量紫外光子激发且光电发射量子效率极低.本文利用Mie散射共振效应增强银纳米颗粒中的局域光学态密度,提升光吸收率和电子的输运效率,并利用激活层降低银的功函数,从而增强光阴极在可见光区的量子效率.采用时域有限差分方法分析银纳米球阵列的光学共振特性,采用磁控溅射和退火工艺在银/氧化锡铟复合衬底上制备银纳米球,紧接着在其表面沉积制备铯激活层,最后在高真空腔体中测试光电发射量子效率.实验结果表明平均粒径150 nm的银纳米球光阴极在425 nm波长的量子效率超过0.35%,为相同激活条件下银薄膜光阴极的12倍,峰值波长与理论计算的Mie共振波长相符合.     

排名聚合算法在少量长列表聚合中的性能比较分析

排名聚合将多个排名列表聚合成一个综合排名列表,可应用于推荐系统、链路预测、元搜索、提案评选等.当前已有工作从不同角度对不同排名聚合算法进行了综述、比较,但存在算法种类较少、数据统计特性不清晰、评价指标不够合理等局限性.不同排名聚合算法在提出时均声称优于已有算法,但是用于比较的方法不同,测试的数据不同,应用的场景不同,因此何种算法最能适应某一任务在很多情况下仍不甚清楚.本文基于Mallows模型,提出一套生成统计特性可控的不同类型的排名列表的算法,使用一个可应用于不同类型排名列表的通用评价指标,介绍9种排名聚合算法以及它们在聚合少量长列表时的表现.结果发现启发式方法虽然简单,但是在排名列表相似度较高、列表相对简单的情况下,能够接近甚至超过一些优化类方法的结果;列表中平局数量的增长会降低聚合排名的一致性并增加波动;列表数量的增加对聚合效果的影响呈现非单调性.整体而言,基于距离优化的分支定界方法 (FAST)优于其他各类算法,在不同类型的排名列表中表现非常稳定,能够很好地完成少量长列表的排名聚合.     

Double Andreev reflections at surface states of the topological insulators with hexagonal warping

We study the Andreev reflection(AR)at the interface of the topological insulator with hexagonal warping and superconductor junction.Due to the hexagonal warping effect,the double ARs are found in a certain range of the incident angle,where for one incident electron beam,two beams of holes are reflected back.Interestingly,both the beams of holes are reflected as retro-AR on the same side of the normal line of the interface but with different reflection angles,different from the previously reported double AR with one retro-AR and one specular-AR.The double reflections owing to the warping effect show the optics-like property of the Dirac fermion and can stimulate the double reflections of light in anisotropic crystals.In addition,we find that the double ARs are dependent on the hexagonal warping parameter nonmonotonically,and in an intermediate strength the double AR phenomenon is prominent,providing a possibility to explore the warping parameter of topological insulators.     

注汽油井蒸气汽液比的折射率法测量研究

给油田的油井中注入高温高压蒸气时,从井口到井底连续地查明汽液比对节省能源和提高产出率意义重大。由于干蒸气和水的折射率不同,汽液的比例可以从汽液两相流的折射率响应特性反映出来。研制的测量装置采用蓝宝石作为折射率敏感的探测头,直接对汽液两相流的比例变化产生响应,能够应用于高温高压及狭窄工作空间的输汽环境中。装置在锅炉输汽管道中的实测响应曲线反映了输汽过程中汽液比的真实变化。该装置还在井深800m,井口蒸气温度270℃、压力10Mpa的油田注汽井中进行测量,测得的结果对注汽法采油的井况分析具有一定的作用。     

Maghemite/poly(<Emphasis Type="SmallCaps">d,l</Emphasis>-lactide-<Emphasis Type="Italic">co</Emphasis>-glycolyde) composite nanoplatform for therapeutic applications

A reproducible methodology is described for the synthesis, by following the double emulsion/solvent evaporation technique, of magnetic nanocomposites (average diameter ≈ 135 nm) consisting of maghemite nuclei and a biodegradable poly(d,l-lactide-co-glycolide) matrix. The heterogeneous structure of the nanoparticles can confer them the responsiveness to magnetic gradients, giving both the possibility of their use as a drug delivery system and adequate heating characteristics for a hyperthermia effect. The physical chemistry of the nanocomposites was extensively characterized, this establishing that their surface properties were similar to that of pure poly(d,l-lactide-co-glycolide). From an electrokinetic point of view, zeta potential determinations (as a function of the ionic strength, and pH) pointed out that the nanocomposites were almost indistinguishable from the copolymer. The surface thermodynamic analysis agreed with the electrophoretic one in suggesting that the coverage of the magnetic nuclei was complete, since the hydrophilic nature of maghemite was modified and the nanoparticles turned into hydrophobic, just like the copolymer, when they were embedded into poly(d,l-lactide-co-glycolide). The magnetic behaviours of the composite nanoparticles were also checked. Their heating properties were studied in vitro in a high-frequency alternating gradient of magnetic field: a stable maximum temperature of 47 °C was satisfactorily achieved within 45 min. Blood compatibility of the nanocomposites was also defined in vitro. To our knowledge, this is the first time that such kind of magnetic-sensitive nanoformulation with very promising characteristics (e.g. blood compatibility, magnetic drug targeting capabilities, and hyperthermia) has been developed for therapeutic purposes.     

The electrical conductivity of chloride melts

The interrelationship between electrical conductivity, molar volume and enthalpy of mixing was studied for molten chlorides and their mixtures. The dependence of electrical conductivity and activation energy on the molar volume is different for various groups of salts. The dependence of specific conductivity on molar volume obtained for molten alkali chlorides was found to be similar to other chloride salts. The specific conductivity of binary mixtures that lack strong chemical interactions between the components can also be described by the proposed empirical equation. The enthalpy of mixing should be taken into consideration for these chemical interactions.