A Novel Enhancing Flow-Injection Chemiluminescence Method for the Determination of Glutathione Using the Reaction of Luminol with Hydrogen Peroxide

 A rapid flow-injection method with chemiluminescence (CL) detection is described for the determination of glutathione (GSH). The method is based on the CL reaction of luminol and hydrogen peroxide. GSH can greatly enhance the chemiluminescence intensity in 0.1 mol/L borax–sodium hydroxide buffer solution (pH = 9.7). The maximum CL intensity was directly proportional to the concentration of GSH in the range 3.0 × 10⁻⁷–2.0 × 10⁻⁵ mol/L, and the detection limit was 6.8 × 10⁻⁸ mol/L. The relative standard deviation was 3.4% for 5.0 × 10⁻⁶ mol/L of GSH (n = 11). Received October 23, 2001; accepted June 18, 2002     

Syntheses and structural characterizations of Fe4S4 cubane-like cluster compounds containing cycloalkylthiolate ligands

In a reaction system consisting of FeCl₂, tetrathiometallate and cycloalkylthiolate, two Fe₄S₄ cubanelike cluster compounds were obtained with the following crystallographic data: (PhCH₂NMe₃)₂ [ Fe₄S₄ (SC₅H₉)₄] (I), monoclinic space groupP2₁/c,a = 1.632 7(4),b=1.122 9(3),c = 2. 802 5(10) nm, β= 94.63(2)°, Z=4, andR= 0.074; (Et₄N)₂[F₄S4(SC₆H_lI)₄] (II), tetragod space group ,a = l.167 05(9),b = 1.167 06(2),c = 2.063 26(5) nm,Z = 2, D_obs = 1. 28 g/cm³, andR = 0. 078. The participation of cycloalkylthiolate ligand does not obviously arouse the change of the Fe₄S₄ core structure. Meanwhile, the influence of the cation on the structural symmetry of the Fe₄S₄ cluster dianion is also discussed. Project supported by the National Natural Science Foundation of China and the Climbing Program Foundation of China.     

Reactions of cobalt clusters with deuterium

The kinetics of chemical reactions of cobalt clusters Co_n with deuterium are described. Absolute rate constants have been measured in the size range n=7–68 at 293 K. The rate constants are found to be a strong function of cluster size, varying by a factor of 400. This size dependence is most prominent for n=7 to 25: Co₁₅ is the most reactive cluster, and Co_7–9 and Co_19–20 are particularly unreactive. Abrupt changes in the rate constants from one cluster size to the next are observed. For the clusters above n=25, the rate constants show several less prominent maxima and minima superimposed on a slow, nearly monotonic increase with cluster size.     

Synthesis of oligo(p-phenylene vinylene)-porphyrin-oligo(p-phenylene vinylene) triads as antenna molecules for energy transfer

The oligo(p-phenylene vinylene)-porphyrin-oligo(p-phenylene vinylene) (P-OPVn, n=2, 4, where n is the number of phenyl rings) and the complex with Zn²⁺ based on P-OPVn were synthesized for investigating their photophysical properties via UV-vis, voltammetry, steady-state and time-resolved fluorescence spectra. In these molecules two OPV moieties as energy donors were linked to porphyrin center by virtue of Wittig reaction. The detailed studies of photophysical properties indicate that OPV group can act as an antenna unit for effective intramolecular energy transfer.     

Application of artificial neural networks in multivariable optimization of an on-line microwave FIA system for catalytic kinetic determination of iridium(III)

A new rapid, selective and sensitive on-line microwave flow injection-kinetic method was developed for spectrophotometric determination of micro amounts of Ir(III), based on its catalytic effect on the m-acetylchlorophosphonazo (CPA-mA) and KIO(4) reaction in NaOH media. An on-line microwave oven was employed to accelerate the reaction. The reaction was followed spectrophotometrically by measuring the decrease of the absorbance of CPA-mA at 580 nm. The effect of five variables for the determination of Ir(III) was optimized by means of a multilayer artificial neural network using extended delta-bar-delta (EDBD) algorithms. Under the optimum experimental conditions, Ir(III) could be determined in the range 0.060-0.60 micro gZZZ;mL(-1) with detection limit of 0.02 micro gZZZ;mL(-1) and the sampling frequency of 34 h(-1). The proposed method was applied to the determination of micro amounts of Ir(III) in refined ore and secondary alloy with the recoveries from 91.4% to 109%.     

Porous nanocomposites of zirconium dioxide and silicate

Highly porous nanocomposites of zirconium dioxide and silicate are synthesised in an aqueous system from an inorganic salt of zirconium; the nanacomposites, with tailorable pore structures, exhibit superior performance as catalyst supports.     

A Highly Sensitive and Selective Assay for Cysteine Using the Chemiluminescence Reaction of Luminol and Hydrogen Peroxide

A very simple, highly sensitive and selective chemiluminescence (CL) method was established for the determination of cysteine. This method is based on the fact that the CL reaction of luminol and hydrogen peroxide can be greatly enhanced by cysteine. The CL intensities at maximum light emission were linearly correlated with the concentration of cysteine over the range of 2.0×10^–8–6.0×10^–6molL^–1 with a detection limit of 7.5×10^–9molL^–1. The relative standard deviation was 1.7% for the determination of 1.0×10^–7molL^–1 cysteine (n=9). The feasibility of utilizing the proposed method for the determination of total concentration of cysteine in human serum was examined.     

DFT study on the geometric, electronic structure and Raman spectra of 5,15-diphenylporphine

The ground state geometric, electronic structure and Raman spectra of 5,15-diphenylporphine (H(2)DPP) have been studied using B3LYP/6-31G(d) method and compared with that of well-studied free base porphine (H(2)P) and meso-tetraphenylporphine (H(2)TPP). Calculation shows that 5,15-substitution causes remarkable in-plane distortion, whereas the resulting out-of-plane distortion is negligible. The calculated electronic structure of H(2)DPP is consistent with the absorption spectra compared with H(2)P and H(2)TPP. The calculated vibrational frequencies of H(2)DPP scaled with a single factor of 0.971 agree well with experimental data (the rms error is 8.0 cm(-1)). The assignment of experimental Raman bands of H(2)DPP was discussed on the basis of theoretical calculation and the comparison with that of H(2)P and H(2)TPP. The splitting of some vibrational modes involving the motion of C(m) atom, such as nu(1), nu(8), and nu(10), was observed and was attributed to the diversification of the environment around C(m) atoms. As the shift of absorption peaks, the shift of some structure-sensitive Raman bands of H(2)DPP form that of H(2)TPP and H(2)P was attributed to the in-plane nuclear reorganization (IPNR) induced by phenyl-substitution, though the contribution of nonplanarity mechanism could not be excluded completely.     

Evolution of the interface and metal film morphology in the vapor deposition of Ti on hexadecanethiolate hydrocarbon monolayers on Au

The combination of in situ X-ray photoelectron spectroscopy, infrared reflection spectroscopy, atomic force microscopy, and time-of-flight secondary ion mass spectrometry are used to probe the nature of the evolving interface chemistry and metal morphology arising from Ti vapor deposition onto the surface of a CH(3)(CH(2))(15)S/Au{111} self-assembled monolayer (SAM) at ambient temperature. The results show that for a deposition rate of approximately 0.15 Ti atom.nm(-2).s(-1) a highly nonuniform Ti overlayer is produced via a process in which a large fraction of impinging Ti atoms do not stick to the bare SAM surface. The adsorbed atoms form isolated Ti clusters and react with CH(3) groups to form carbide products at the cluster-SAM interfaces. Further growth of Ti clusters appears to be concentrated at these scattered reaction centers. The SAM molecules in the local vicinity are subsequently degraded to inorganic products, progressing deeper into the monolayer as the deposition proceeds to give an inorganic/organic nanocomposite. A continuous overlayer does not form until metal coverage approaches approximately 50 Ti atoms per SAM molecule. These data indicate that for applications such as molecular device contacts the use of Ti may be highly problematic, suffering from both a highly nonuniform contact area and the presence of extensive inorganic products such as nonstoichiometric carbides and hydrides.     

党参花粉多糖的研究

从蜜峰采集的党参花粉中,分离到5种多糖CPA～CPE,经凝胶过滤及电泳法验证了纯度并测定了分子量。对CPA进行了全水解、甲基化分析、NalO_4氧化和Smith降解分析,用旋光法测定了CPA中单糖残基的绝对构型,对CPA的IR、~1H NMR、~(13)C NMR及~1H NMR、~(13)C偶合NMR进行了分析,确定了异头碳的构型。对CPA进行了电子显微镜分析,首次在透射电子显微镜下观察并拍摄到了具有串珠状特殊二级结构的多糖照片,经分析得到了CPA二级结构的一些信息。