Novel Z-selective head-to-head dimerization of terminal alkynes catalyzed by lanthanide half-metallocene complexes

Various terminal alkynes have been cleanly dimerized into the corresponding head-to-head (Z)-enynes by use of the half-metallocene lutetium alkyl complexes Me2Si(C5Me4)(NAr)Lu(CH2SiMe3)(THF) (Ar = Ph, C6H3Me2-2,6, C6H2Me3-2,4,6) as catalysts. Aromatic C-Cl, C-Br, and C-I bonds, which are known to be extremely susceptible to reductive cleavage by transition metals, survived in the present reactions. The corresponding dimeric alkynide species [Me2Si(C5Me4)(NAr)Lu(mu-CCR)]2 are thought to be the true catalysts, some of which have been isolated and structurally characterized. These alkynide species were thermally stable and soluble at the reaction temperatures (80-110 degrees C), but they precipitated upon cooling to room temperature after completion of the reaction. Therefore, this catalyst system works homogeneously but can be separated and reused, thus constituting the first example of a recyclable catalyst system for the dimerization of terminal alkynes and also the first example of (Z)-selective head-to-head dimerization of aromatic terminal alkynes.     

Inhibitory effects of 3-O-acyl-(+)-catechins on Epstein-Barr virus activation

In the course of an exploratory investigation of antitumor-promoting catechins, 3-O-acyl-(+)-catechins of varying carbon lengths from C(4) to C(18) were assessed for inhibitory effects on the activation of the Epstein-Barr virus early antigen. Like 3-O-acyl-(-)-epigallocatechins, the (+)-catechin derivatives showed promising effects with the C-3 acyl chain of C(8)-C(11) carbon atoms.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Cationic ring-opening transfer polymerization of spiro ortho esters initiated by carbon black

The ring-opening transfer polymerization of spiro ortho esters (SOE) initiated by carbon black was investigated. In the absence of carbon black, no polymerization occurred at all. In the presence of channel black containing carboxyl group, the ring-opening transfer polymerization of SOE was initiated at 50-70°C. to give polyether ester, namely alternating copolymer of epoxide and lactone. The rate of polymerization of 1,4,6-trioxaspiro[4.4]nonane and 1,4,6-trioxaspiro[4.5]decane was considerably small compared with that of 1,4,6-trioxaspiro[4.6]undecane. The activation energy of the polymerization of 2-chloromethyl-1,4,6-trioxaspiro[4.6]undecane was estimated to be 6.0 kcal/mol. The initiating activity of carbon black increased with an increase in carboxyl group content of carbon black. Furnace black that contained no carboxyl group was unable to initiate the polymerization. Furthermore, the carbon black lost the initiating ability of the polymerization upon the blocking of carboxyl group on the surface by the treatment with potassium hydroxide or diazomethane. Based on these results, it was concluded that carboxyl group on carbon black plays an important role in the initiation. During the polymerization, a part of the polymer formed was grafted onto carbon black: the grafting ratio was 10–30%. The mechanisms of initiation and grafting were discussed.     

Polyisobutylene-containing block polymers by sequential monomer addition. X. Synthesis of poly(α-methylstyrene-b-isobutylene-b-α-methylstyrene) thermoplastic elastomers

Preparatory to triblock synthesis experiments, the cationic polymerization of α-methylstyrene (αMeSt) was investigated using the 2-chloro-2,4,4-trimethylpentane (TMPCI)/TiCl₄ initiating system in the presence of triethylamine (Et₃N) as electron donor (ED) and CH₃Cl/n-hexane mixed solvent in the ?80 to ?40°C range. Conversions are influenced by temperature, [TiCl₄], [Et₃N], and [αMeSt]. The polymerization of αMeSt is living at ?80°C: Both termination and chain transfer to monomer are frozen out, however, initiation is slow relative to propagation. Highly syndiotactic (>94%) Pα Mest was obtained. At?60deg;C initiator efficiency is ca. 100%, but termination becomes evident. Et₃N may act both as Ed and as proton scavenger. Novel poly(α-methystyrene-b-isobutylene-b-α-methylstyrene) (PαMeSt-PIB-PαMeSt) triblocks have been synthesized by adding αMeSt to biliving polyisobutylene carbocations (⊕PIB⊕) in the ?80 to ?40°C range. The effects of temperature, solvent polarity, and [Et₃N] on the block copolymerization have been investigated. At ?80°C, the rate of crossover from ⊕PIB⊕ to αMeSt is lower than that of propagation of PαMeSt⊕, so that the triblock is contaminated by PIB and PIB-b-PαMeSt. At ?60°C, crossover occurs preferentially. The rate of propagation relative to that of crossover is also reduced by lowering the solvent polarity and increasing the [Et₃N]. High crossover efficiency and blocking efficiency can be obtained under optimum blocking conditions. The triblocks are novel thermoplastic elastomers (TPEs). © 1994 John Wiley & Sons, Inc.     

Aryl-aryl coupling reaction using a novel and highly active palladium reagent prepared from Pd(OAc)2, 1,3-bis[diphenylphosphino]propane (DPPP), and Bu3P

A palladium-assisted coupling reaction of aryl triflate with arene was investigated, and a novel Pd reagent prepared from equimolar Pd(OAc)2, 1,3-Bis[diphenylphosphino]propane (DPPP), and Bu3P was developed. This method is useful for intramolecular biaryl coupling reactions, not only between aryl triflate and arene (triflate-amide), but also between aryl halide and arene (halo-amide).     

Corrigendum to “Constraints on operator ordering from third quantization” [Ann. Phys. 365 (2016) 54–65]

In our previous paper Ohkuwa et al. (2016) corrigendum was found in Eqs. (3.4) and (3.6). However, conclusions of our previous paper are not changed.     

Time-resolved fluorometric analysis of carbohydrates labeled with amino-aromatic compounds by reductive amination

We examined the formation of complexes between terbium ion (Tb3+) and carbohydrates labeled with aminobenzene compounds. Of the examined compounds, carbohydrates labeled with 4-aminosalicylic acid showed intense fluorescence with Tb3+ in the presence of cetylpyridinium chloride at pH 6.0. Calibration curves for maltose derivative showed good linearity between 5 pmol and at least 600 pmol, with good reproducibility. We applied the proposed technique to binding studies between manno-oligosaccharides and Concanavalin A.     

Reply to the note on the flow behaviour of combustion gas in the boundary layer of an MHD generator

The temperature profile in Fig. 3 of Ref. 1 is better approximated by a relation for a turbulent boundary layer than a laminar boundary layer. The critical Reynolds number is expected to be lowered in the flow train of MHD combustion gas because of large turbulence in the combustor and by roughness along the duct.     

Crystal growth of Co ferrite on fine acicular γ-Fe2O3 particles

Highly coercive magnetic powder was obtained by growing cobalt ferrite on the surface of γ-Fe₂O₃ particles in highly alkaline suspensions containing cobalt and ferrous ions in a Co/Fe molar ratio = $\text{1}\text{2}$. The mechanism of the growth and the structure of cobalt ferrite on γ-Fe₂O₃ were studied by X-ray diffraction and electron diffraction techniques. Results show that crystals of cobalt ferrite CoFe₂O₄ with a spinel type crystal structure of lattice constant 8.415 Å grew epitaxially on γ-Fe₂O₃. The acicular direction of the epitaxially grown Co-γ-Fe₂O₃ as well as γ-Fe₂O₃ was in the [$\text{1}$01] direction. It was found that from the lattice constant value and the half width of X-ray diffraction peaks, the lattice constant epitaxially grown Co γ-Fe₂O₃ may be attributed to two kinds of crystals, viz., seed γ-Fe₂O₃ ($\text{a = 8.35 ～ 8.37}\text{A}\text{?}$) which was partly reduced to Fe₃O₄, and surface layer CoFe₂O₄ ($\text{a = 8.415}\text{A}\text{?}$). The crystal growth in the interface between the seed crystals and the growth layer was affected by the crystal structure of the seed crystals. The lattice constant of CoFe₂O₄ which was located in the vicinity of the interface was almost equal to that of the seed crystals.